[-]
Who's Online
There are currently 2000 online users. [Complete List]
» 1 Member(s) | 1999 Guest(s)
Avatar

[-]
Latest Threads
ZH960 Tablet Bricked
Last Post: luis mar que
2024-03-20 19:52
» Replies: 15
» Views: 9690
User What is the effect of food intake o...
Last Post: fildena150as
2024-03-13 16:37
» Replies: 0
» Views: 23
Thanks, I've been looking for this for a...
Last Post: StevenRip
2024-02-25 05:00
» Replies: 0
» Views: 16
[SOLVED] Need ROM for ZH960-MB-V4.1
Last Post: ery1988
2024-02-21 08:59
» Replies: 0
» Views: 77
NEED ROM ZH960-MB-V4.1
Last Post: ery1988
2024-02-21 08:53
» Replies: 18
» Views: 13534
Budget phone choice help needed
Last Post: sabir7272
2024-02-10 06:52
» Replies: 4
» Views: 4184
ZH960-MB-V3.1 SOLVE
Last Post: Pranav1
2023-12-20 20:22
» Replies: 77
» Views: 33574
Need ROM for SONIM XP7S Android 5.1.1
Last Post: Alpa
2023-11-29 22:17
» Replies: 0
» Views: 70
Need rom for X101 Mt6592
Last Post: carencell
2023-11-24 21:30
» Replies: 3
» Views: 2038
Gizbeat 101: Get your MTK6589 MTK6577 MT...
Last Post: Alexia78
2023-11-13 11:28
» Replies: 8
» Views: 22263
ZH960-MB-V3.1
Last Post: Giankyworld81
2023-11-01 19:35
» Replies: 21
» Views: 15358
Need rom for a tablet with board id "K10...
Last Post: oliver2
2023-10-24 20:23
» Replies: 6
» Views: 5131
How to Connect open public wifi
Last Post: oliverben45
2023-10-24 16:03
» Replies: 11
» Views: 8788
I NEED FILE FOR ITEL MOBILE PHONE AND TO...
Last Post: Meghnad45
2023-10-22 02:38
» Replies: 1
» Views: 1375
NEED Help Bricked my phone.
Last Post: Meghnad45
2023-10-22 02:36
» Replies: 4
» Views: 4784
Introduction
Last Post: ezrahidaya
2023-10-14 14:38
» Replies: 3
» Views: 1295
Needs help to root a china tablet brand ...
Last Post: ezrahidaya
2023-10-14 14:37
» Replies: 1
» Views: 166
Any tips to stay awake?
Last Post: ezrahidaya
2023-10-14 14:35
» Replies: 6
» Views: 4868
Need ROM for china TAb MT6797
Last Post: ezrahidaya
2023-10-14 14:34
» Replies: 1
» Views: 309
need this stock firmware for my tablet M...
Last Post: ramzii888
2023-10-14 02:20
» Replies: 4
» Views: 4449
Encryption Unsuccessful - Reset Android
Last Post: Aakriti
2023-10-13 16:51
» Replies: 3
» Views: 12374
betools
Last Post: egdeim
2023-09-21 12:41
» Replies: 4
» Views: 5019
[Movie Suggestion] Automata with Antonio...
Last Post: GottaGetX
2023-09-07 09:19
» Replies: 3
» Views: 4087





Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Mobileuncle MTK Tools expert advice needed
#11
(2015-01-16, 07:12)Cleopatra Wrote:
(2014-08-11, 12:23)Bluesmanuk Wrote: Thanks.

I'll take a look.

INCREASE THE AUDIO WITH MOBILEUNCLE TOOLS

It seems to me that a little clarity on the issue is due.

It's so difficult to achieve the appropriate audio settings; sailing on the net I've found a lot of different advices about audio settings.

Anyway, MAYBE I've found the right settings (they work well on my smartphone).

FIRST OF ALL

Clarify the terms and their meaning:

Sip - Phone Calls, Sph – Speaker volume levels during a telephone conversation, Mic – microphone sensitivity levels (note that it is not microphone volume), Ring – ringer volume, Media – volume while playing music, movies, games, FMR – FM radio volume, Matv – TVB

SECOND

The Max Volume is 160 , but a lot of people advise against to set the max volume to 160 because it could damage your phone.
Set the max volume to 150 is more than enough.

THE AUDIO SETTINGS:

Open Mobile Uncle Tools and open engineering mode.
Under engineering mode, go to 'Hardware Testing' and go to ‘Audio’.
Go to ‘Normal Mode’ (front speaker)
Under ‘Type’ select 'Sip'.
Under ‘Level’ enter these values (Value is 0~255)

Level 0 < Value 160 Max vol 150 (press SET and OK)
Level 1 < Value 176 Max vol 150 (press SET and OK)
Level 2 < Value 192 Max vol 150 (press SET and OK)
Level 3 < Value 208 Max vol 150 (press SET and OK)
Level 4 < Value 224 Max vol 150 (press SET and OK)
Level 5 < Value 240 Max vol 150 (press SET and OK)
Level 6 < Value 255 Max vol 150 (press SET and OK)

Apply the same settings (above) to 'Sip' on ‘Headset Mode’ and 'Sip' on ‘Loudspeaker Mode’

'Loudspeaker Mode' is the back speaker.

Next, in ‘Normal Mode’ under ‘Type’ select ‘Mic’. Under ‘Level’ select ‘Level 0'.
Under ‘Value is 0~255' enter 255. For all levels, from level 0-6 set the value as 255 (there are 14 levels on my phone and I've set all levels to 255). This will ensure that your voice is audible to other person even when you turn down the speaker volume. Apply the same settings to ‘Headset Mode’ -> Mic and ‘Loudspeaker Mode’ -> Mic.
Next, in ‘Normal Mode’ under ‘Type’ select ‘Sph’. Under ‘Level’ select ‘Level 0'.
Enter these values under ‘Value is 0~160' for various levels.

Level 0 -> 90
Level 1 -> 100
Level 2 -> 110
Level 3 -> 120
Level 4 -> 130
Level 5 -> 140
Level 6 -> 150

Apply the same settings (above) to 'Sph2'
Apply the same settings (above) to ‘Headset Mode’ -> Sph, Sph2 and ‘Loudspeaker Mode’ -> Sph, Sph2
Next, in ‘Normal Mode’ under ‘Type’ select ‘Media’.
Enter these values under ‘Value is 0~255' for various levels.

Level 0 -> 32
Level 1 -> 48
Level 2 -> 64
Level 3 -> 80
Level 4 -> 96
Level 5 -> 112
Level 6 -> 128
Level 7 -> 144
Level 8 -> 160
Level 9 -> 176
Level 10 -> 192
Level 11 -> 208
Level 12 -> 224
Level 13 -> 240
Level 14 -> 255

Apply the same settings (above) to 'Headset Mode’ -> FMR, Media and Matv
Apply the same settings (above) to ‘Loudspeaker Mode’ -> FMR, Media and Matv

VERY IMPORTANT: remember to restart the phone after to apply all the settings.

I hope that my suggested audio settings and solutions help you.

Hi Cleopatra. Are you a member if Chinaphonearena or just a posting forum member?? Couldn't pm you so I found one of your oldest posts.
You like this post
Reply
#12
Hello Cleopatra. (Anyone! )[/b] Thank you for this information Smiling My speakerphone however, has stopped working completely. (I redid all the settings as posted below.) Do you know if there is any way to go back to the default MTK settings? Would resetting the phone do this?

Thanks a lot Smiling
(2015-01-16, 07:12)Cleopatra Wrote:
(2014-08-11, 12:23)Bluesmanuk Wrote: Thanks.

I'll take a look.

INCREASE THE AUDIO WITH MOBILEUNCLE TOOLS

It seems to me that a little clarity on the issue is due.

It's so difficult to achieve the appropriate audio settings; sailing on the net I've found a lot of different advices about audio settings.

Anyway, MAYBE I've found the right settings (they work well on my smartphone).

FIRST OF ALL

Clarify the terms and their meaning:

Sip - Phone Calls, Sph – Speaker volume levels during a telephone conversation, Mic – microphone sensitivity levels (note that it is not microphone volume), Ring – ringer volume, Media – volume while playing music, movies, games, FMR – FM radio volume, Matv – TVB

SECOND

The Max Volume is 160 , but a lot of people advise against to set the max volume to 160 because it could damage your phone.
Set the max volume to 150 is more than enough.

THE AUDIO SETTINGS:

Open Mobile Uncle Tools and open engineering mode.
Under engineering mode, go to 'Hardware Testing' and go to ‘Audio’.
Go to ‘Normal Mode’ (front speaker)
Under ‘Type’ select 'Sip'.
Under ‘Level’ enter these values (Value is 0~255)

Level 0 < Value 160 Max vol 150 (press SET and OK)
Level 1 < Value 176 Max vol 150 (press SET and OK)
Level 2 < Value 192 Max vol 150 (press SET and OK)
Level 3 < Value 208 Max vol 150 (press SET and OK)
Level 4 < Value 224 Max vol 150 (press SET and OK)
Level 5 < Value 240 Max vol 150 (press SET and OK)
Level 6 < Value 255 Max vol 150 (press SET and OK)

Apply the same settings (above) to 'Sip' on ‘Headset Mode’ and 'Sip' on ‘Loudspeaker Mode’

'Loudspeaker Mode' is the back speaker.

Next, in ‘Normal Mode’ under ‘Type’ select ‘Mic’. Under ‘Level’ select ‘Level 0'.
Under ‘Value is 0~255' enter 255. For all levels, from level 0-6 set the value as 255 (there are 14 levels on my phone and I've set all levels to 255). This will ensure that your voice is audible to other person even when you turn down the speaker volume. Apply the same settings to ‘Headset Mode’ -> Mic and ‘Loudspeaker Mode’ -> Mic.
Next, in ‘Normal Mode’ under ‘Type’ select ‘Sph’. Under ‘Level’ select ‘Level 0'.
Enter these values under ‘Value is 0~160' for various levels.

Level 0 -> 90
Level 1 -> 100
Level 2 -> 110
Level 3 -> 120
Level 4 -> 130
Level 5 -> 140
Level 6 -> 150

Apply the same settings (above) to 'Sph2'
Apply the same settings (above) to ‘Headset Mode’ -> Sph, Sph2 and ‘Loudspeaker Mode’ -> Sph, Sph2
Next, in ‘Normal Mode’ under ‘Type’ select ‘Media’.
Enter these values under ‘Value is 0~255' for various levels.

Level 0 -> 32
Level 1 -> 48
Level 2 -> 64
Level 3 -> 80
Level 4 -> 96
Level 5 -> 112
Level 6 -> 128
Level 7 -> 144
Level 8 -> 160
Level 9 -> 176
Level 10 -> 192
Level 11 -> 208
Level 12 -> 224
Level 13 -> 240
Level 14 -> 255

Apply the same settings (above) to 'Headset Mode’ -> FMR, Media and Matv
Apply the same settings (above) to ‘Loudspeaker Mode’ -> FMR, Media and Matv

VERY IMPORTANT: remember to restart the phone after to apply all the settings.

I hope that my suggested audio settings and solutions help you.

[b]
You like this post
Reply
#13
Hi eebowler !

Please tell me the brand and the model of your phone.

Thank you in advance.
You like this post
Reply
#14
Big Grin It's a ulefone Paris with the MTK6753 chip.
(2016-09-29, 21:53)Cleopatra Wrote: Hi eebowler !

Please tell me the brand and the model of your phone.

Thank you in advance.
You like this post
Reply
#15
(2016-09-29, 23:48)eebowler Wrote: [Only registered and activated users can see links Click here to register]
Reply
#16
Aye!! I've finally downgraded to the stock firmware and the speakerphone still does not work. I checked mobileuncle and the settings seemed to be back to what it was before. I can only assume it's a hardware issue. Thank you for your help Cleo. I may try upgrading to marshmellow now. ;) .
(2016-09-30, 00:01)Cleopatra Wrote: [Only registered and activated users can see links Click here to register]
Reply
#17
Hello, I am not expert in terminology, hope someone can advice and help me. I have problem with my MTK6592 Lenovo screen. Its has many colours line on the screen. Its a graphic chip problem? Bought it from China as it is. Do not get refund as its too costly to send back to China for repair.
You like this post
Reply
#18
(2015-01-16, 07:12)Cleopatra Wrote:
(2014-08-11, 12:23)Bluesmanuk Wrote: Thanks.

I'll take a look.

INCREASE THE AUDIO WITH MOBILEUNCLE TOOLS

It seems to me that a little clarity on the issue is due.

It's so difficult to achieve the appropriate audio settings; sailing on the net I've found a lot of different advices about audio settings.

Anyway, MAYBE I've found the right settings (they work well on my smartphone).

FIRST OF ALL

Clarify the terms and their meaning:

Sip - Phone Calls, Sph – Speaker volume levels during a telephone conversation, Mic – microphone sensitivity levels (note that it is not microphone volume), Ring – ringer volume, Media – volume while playing music, movies, games, FMR – FM radio volume, Matv – TVB

SECOND

The Max Volume is 160 , but a lot of people advise against to set the max volume to 160 because it could damage your phone.
Set the max volume to 150 is more than enough.

THE AUDIO SETTINGS:

Open Mobile Uncle Tools and open engineering mode.
Under engineering mode, go to 'Hardware Testing' and go to ‘Audio’.
Go to ‘Normal Mode’ (front speaker)
Under ‘Type’ select 'Sip'.
Under ‘Level’ enter these values (Value is 0~255)

Level 0 < Value 160 Max vol 150 (press SET and OK)
Level 1 < Value 176 Max vol 150 (press SET and OK)
Level 2 < Value 192 Max vol 150 (press SET and OK)
Level 3 < Value 208 Max vol 150 (press SET and OK)
Level 4 < Value 224 Max vol 150 (press SET and OK)
Level 5 < Value 240 Max vol 150 (press SET and OK)
Level 6 < Value 255 Max vol 150 (press SET and OK)

Apply the same settings (above) to 'Sip' on ‘Headset Mode’ and 'Sip' on ‘Loudspeaker Mode’

'Loudspeaker Mode' is the back speaker.

Next, in ‘Normal Mode’ under ‘Type’ select ‘Mic’. Under ‘Level’ select ‘Level 0'.
Under ‘Value is 0~255' enter 255. For all levels, from level 0-6 set the value as 255 (there are 14 levels on my phone and I've set all levels to 255). This will ensure that your voice is audible to other person even when you turn down the speaker volume. Apply the same settings to ‘Headset Mode’ -> Mic and ‘Loudspeaker Mode’ -> Mic.
Next, in ‘Normal Mode’ under ‘Type’ select ‘Sph’. Under ‘Level’ select ‘Level 0'.
Enter these values under ‘Value is 0~160' for various levels.

Level 0 -> 90
Level 1 -> 100
Level 2 -> 110
Level 3 -> 120
Level 4 -> 130
Level 5 -> 140
Level 6 -> 150

Apply the same settings (above) to 'Sph2'
Apply the same settings (above) to ‘Headset Mode’ -> Sph, Sph2 and ‘Loudspeaker Mode’ -> Sph, Sph2
Next, in ‘Normal Mode’ under ‘Type’ select ‘Media’.
Enter these values under ‘Value is 0~255' for various levels.

Level 0 -> 32
Level 1 -> 48
Level 2 -> 64
Level 3 -> 80
Level 4 -> 96
Level 5 -> 112
Level 6 -> 128
Level 7 -> 144
Level 8 -> 160
Level 9 -> 176
Level 10 -> 192
Level 11 -> 208
Level 12 -> 224
Level 13 -> 240
Level 14 -> 255

Apply the same settings (above) to 'Headset Mode’ -> FMR, Media and Matv
Apply the same settings (above) to ‘Loudspeaker Mode’ -> FMR, Media and Matv

VERY IMPORTANT: remember to restart the phone after to apply all the settings.

I hope that my suggested audio settings and solutions help you.

Hi Cleopatra,

I have problems when make calls with Skype video call. The other side tell me that my voice is quite and dont hear me till I get my phone to ear adn speak normally like in phone call. My phone is UHANS A101S MTK 6580. The video and sound recorders work fine but Skype video call is problem.
Thanks

(2015-01-16, 07:12)Cleopatra Wrote:
(2014-08-11, 12:23)Bluesmanuk Wrote: Thanks.

I'll take a look.

INCREASE THE AUDIO WITH MOBILEUNCLE TOOLS

It seems to me that a little clarity on the issue is due.

It's so difficult to achieve the appropriate audio settings; sailing on the net I've found a lot of different advices about audio settings.

Anyway, MAYBE I've found the right settings (they work well on my smartphone).

FIRST OF ALL

Clarify the terms and their meaning:

Sip - Phone Calls, Sph – Speaker volume levels during a telephone conversation, Mic – microphone sensitivity levels (note that it is not microphone volume), Ring – ringer volume, Media – volume while playing music, movies, games, FMR – FM radio volume, Matv – TVB

SECOND

The Max Volume is 160 , but a lot of people advise against to set the max volume to 160 because it could damage your phone.
Set the max volume to 150 is more than enough.

THE AUDIO SETTINGS:

Open Mobile Uncle Tools and open engineering mode.
Under engineering mode, go to 'Hardware Testing' and go to ‘Audio’.
Go to ‘Normal Mode’ (front speaker)
Under ‘Type’ select 'Sip'.
Under ‘Level’ enter these values (Value is 0~255)

Level 0 < Value 160 Max vol 150 (press SET and OK)
Level 1 < Value 176 Max vol 150 (press SET and OK)
Level 2 < Value 192 Max vol 150 (press SET and OK)
Level 3 < Value 208 Max vol 150 (press SET and OK)
Level 4 < Value 224 Max vol 150 (press SET and OK)
Level 5 < Value 240 Max vol 150 (press SET and OK)
Level 6 < Value 255 Max vol 150 (press SET and OK)

Apply the same settings (above) to 'Sip' on ‘Headset Mode’ and 'Sip' on ‘Loudspeaker Mode’

'Loudspeaker Mode' is the back speaker.

Next, in ‘Normal Mode’ under ‘Type’ select ‘Mic’. Under ‘Level’ select ‘Level 0'.
Under ‘Value is 0~255' enter 255. For all levels, from level 0-6 set the value as 255 (there are 14 levels on my phone and I've set all levels to 255). This will ensure that your voice is audible to other person even when you turn down the speaker volume. Apply the same settings to ‘Headset Mode’ -> Mic and ‘Loudspeaker Mode’ -> Mic.
Next, in ‘Normal Mode’ under ‘Type’ select ‘Sph’. Under ‘Level’ select ‘Level 0'.
Enter these values under ‘Value is 0~160' for various levels.

Level 0 -> 90
Level 1 -> 100
Level 2 -> 110
Level 3 -> 120
Level 4 -> 130
Level 5 -> 140
Level 6 -> 150

Apply the same settings (above) to 'Sph2'
Apply the same settings (above) to ‘Headset Mode’ -> Sph, Sph2 and ‘Loudspeaker Mode’ -> Sph, Sph2
Next, in ‘Normal Mode’ under ‘Type’ select ‘Media’.
Enter these values under ‘Value is 0~255' for various levels.

Level 0 -> 32
Level 1 -> 48
Level 2 -> 64
Level 3 -> 80
Level 4 -> 96
Level 5 -> 112
Level 6 -> 128
Level 7 -> 144
Level 8 -> 160
Level 9 -> 176
Level 10 -> 192
Level 11 -> 208
Level 12 -> 224
Level 13 -> 240
Level 14 -> 255

Apply the same settings (above) to 'Headset Mode’ -> FMR, Media and Matv
Apply the same settings (above) to ‘Loudspeaker Mode’ -> FMR, Media and Matv

VERY IMPORTANT: remember to restart the phone after to apply all the settings.

I hope that my suggested audio settings and solutions help you.

Hi Cleopatra,
great post and explanation. I have problem with my mic (UHANS A101S) in the Skype video calls the other side says that don't here me well, I'm "guiet". Video and sound recorders works well, but skype video call is bad. Do you have solution for mic in skype app?
You like this post


Attached Files Thumbnail(s)
   
Reply
#19
Hi!
This thread might be dead, but I give it a try anyway.

Thanks for a great guide, it helped me alot!
I just bought a Doogee T5 from China.
It's a nice phone, but the sound quality when I make phone calls is really bad right now. It sounds like I'm talking inside of a tin can. What setting might change such strange behavior?

Regards
NorthBridge
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  [Question] android lollipop per hdc note 4 mtk 6589 tonino68 4 4,745 2020-09-15, 21:20
Last Post: Drewssilva
  [CWM For All MTK] Easy Magic CWM MT6575 MT6515 MT6577, MT6517 MT6589 MT6582 MT6592 GizBeat 200 430,152 2020-03-11, 18:58
Last Post: nigerman
  root mtk 6737 should i use miracle box? mako 2 2,809 2019-05-24, 09:51
Last Post: mako
  JLINKSZ ZH960_MB.V4.0 FIRMWARE NEEDED! (please see) krzysio2268 0 1,734 2018-09-29, 23:49
Last Post: krzysio2268
  [Question] MTK Droid Root Errors masster 0 1,605 2018-04-17, 16:30
Last Post: masster

Forum Jump:


Users browsing this thread: 1 Guest(s)
[-]
Tech & Science
[Sci-Am] Planet-Eating Stars Are Surprisingly Common, New St...
Last Post: Scientific American
Today 02:16
» Replies: 0
» Views: 0
[Sci-Am] Wegovy Is First Weight-Loss Drug Approved for Heart...
Last Post: Scientific American
Yesterday 12:44
» Replies: 0
» Views: 9
[Harvard] Herbaria’s use and importance grows with climate c...
Last Post: Harvard
Yesterday 12:44
» Replies: 0
» Views: 11
[Sci-Am] Contributors to Scientific American’s April 2024 Is...
Last Post: Scientific American
2024-03-27 22:49
» Replies: 0
» Views: 4
[Sci-Am] Cannibal Cells Inspire Cancer Treatment Improvement
Last Post: Scientific American
2024-03-27 09:07
» Replies: 0
» Views: 1
[Harvard] Harvard physicists create a new phase of matter
Last Post: Harvard
2024-03-27 09:07
» Replies: 0
» Views: 3
[Sci-Am] Readers Respond to the December 2023 Issue
Last Post: Scientific American
2024-03-26 19:41
» Replies: 0
» Views: 5
[Sci-Am] Inside the AI Competition That Decoded an Ancient H...
Last Post: Scientific American
2024-03-25 16:06
» Replies: 0
» Views: 34
[Sci-Am] See Every Bit of Outer Space We’ve Brought Back to ...
Last Post: Scientific American
2024-03-25 01:40
» Replies: 0
» Views: 36
[Sci-Am] Poem: ‘SnapShot, 1968’
Last Post: Scientific American
2024-03-24 10:31
» Replies: 0
» Views: 10
[Sci-Am] Your Next Flight's Fuel Could Be Made By Microbes
Last Post: Scientific American
2024-03-23 19:46
» Replies: 0
» Views: 28
[Sci-Am] Florida’s Surgeon General Shows the Danger of Polit...
Last Post: Scientific American
2024-03-23 05:30
» Replies: 0
» Views: 41
[Sci-Am] The Science behind Humpback Whales’ Eerie Songs
Last Post: Scientific American
2024-03-22 15:51
» Replies: 0
» Views: 51
[Sci-Am] Astronomers Are Snapping Baby Pictures of Planets b...
Last Post: Scientific American
2024-03-22 01:50
» Replies: 0
» Views: 56
[Sci-Am] A ‘Havana Syndrome’ Investigation in Congress Rests...
Last Post: Scientific American
2024-03-20 22:36
» Replies: 0
» Views: 70
[Sci-Am] What’s behind NASA’s Commercial Lunar Hits and Miss...
Last Post: Scientific American
2024-03-20 09:11
» Replies: 0
» Views: 57
[Sci-Am] Microplastics Linked to Heart Attack, Stroke and De...
Last Post: Scientific American
2024-03-19 18:34
» Replies: 0
» Views: 32
[Sci-Am] How the Seven Bridges of Königsberg Spawned New Mat...
Last Post: Scientific American
2024-03-19 04:51
» Replies: 0
» Views: 28
[Sci-Am] Biden’s State of the Union Promises Big Job Gains f...
Last Post: Scientific American
2024-03-18 14:15
» Replies: 0
» Views: 24
[Sci-Am] Paying Attention to Sensations Can Help Reset the M...
Last Post: Scientific American
2024-03-18 00:26
» Replies: 0
» Views: 28
[Sci-Am] How Arguments that Embryos Are People Pose a Threat...
Last Post: Scientific American
2024-03-17 10:12
» Replies: 0
» Views: 34
[Sci-Am] NASA’s Hopes for Space Solar Power Are Looking Dim
Last Post: Scientific American
2024-03-16 19:58
» Replies: 0
» Views: 33
[Sci-Am] Deepwater Sharks Are Threatened by Demand for Liver...
Last Post: Scientific American
2024-03-16 06:21
» Replies: 0
» Views: 35
[Sci-Am] The Amazing Aerial Adventures of the 'Flying Femini...
Last Post: Scientific American
2024-03-15 16:28
» Replies: 0
» Views: 45
[Sci-Am] We Need Small Astronomy as Much as Big Astronomy
Last Post: Scientific American
2024-03-15 02:13
» Replies: 0
» Views: 39
[Sci-Am] Two Giant U.S. Telescopes Are Threatened by Federal...
Last Post: Scientific American
2024-03-14 11:57
» Replies: 0
» Views: 12
[Harvard] Did fermented foods fuel brain growth?
Last Post: Harvard
2024-03-14 11:57
» Replies: 0
» Views: 23
[Sci-Am] What Are the Benefits of Sleeping Alone?
Last Post: Scientific American
2024-03-13 22:27
» Replies: 0
» Views: 8
[Sci-Am] Is Raw Milk Cheese Safe to Eat?
Last Post: Scientific American
2024-03-13 08:41
» Replies: 0
» Views: 5
[Sci-Am] Why Do So Many Mental Illnesses Overlap?
Last Post: Scientific American
2024-03-12 17:56
» Replies: 0
» Views: 6
[Sci-Am] Sora Is OpenAI’s New Text-to-Video Generator. Here’...
Last Post: Scientific American
2024-03-12 03:40
» Replies: 0
» Views: 10
[Sci-Am] Is This the Earliest Evidence of Human Cannibalism?
Last Post: Scientific American
2024-03-11 13:29
» Replies: 0
» Views: 13
[Sci-Am] This New Antivenom Defangs the Toxins of Cobras, Bl...
Last Post: Scientific American
2024-03-10 09:19
» Replies: 0
» Views: 21
[Sci-Am] Florida Surgeon General Risks Making a Dangerous Me...
Last Post: Scientific American
2024-03-09 19:15
» Replies: 0
» Views: 20
[Sci-Am] A Sexbot Gains Sentience in an Eerie New Novel
Last Post: Scientific American
2024-03-08 16:14
» Replies: 0
» Views: 36
[Sci-Am] A Solar Eclipse, Cancer Treatments and Robots with ...
Last Post: Scientific American
2024-03-08 01:32
» Replies: 0
» Views: 51
[Sci-Am] By Preserving Resources, We’re Protecting People, T...
Last Post: Scientific American
2024-03-07 10:49
» Replies: 0
» Views: 44