|
Who's Online
|
There are currently 989 online users. [Complete List]
» 10 Member(s) | 979 Guest(s)
|
|
|
|
Thread Rating:
- 4 Vote(s) - 4 Average
- 1
- 2
- 3
- 4
- 5
|
[Mod] MTK6589 3G Fix / multiple modem.img pack
|
Posts: 3,184
Threads: 555
Joined: 2013-02-10
Points:
21,230
Reputation: +3638
(2013-06-20, 00:54)hbcsavage Wrote: (2013-06-20, 00:15)Gizbeat Wrote: (2013-06-20, 00:03)hbcsavage Wrote: Ok thank you i will wait for the tutorial.
Done. Let me know if it's successful. I've used both methods and they should work fine.
Ok so did everything in the tutorial and now i have no network. Permissions are correct. Should i have modem.bak and modem.img in firmware folder? Properties for New modem.img file is rw- r-- r-- and properties for modem.bak is rwx rwx rwx i dont know if that helps in figuring out anything.
Doesn't matter where modem.bak is. That's just the backup in case there's a problem. modem.img should be in /system/etc/firmware. Is it?
Two roads diverged in a yellow wood,
And sorry I could not travel both
And be one traveler, long I stood
And looked down one as far as I could
To where it bent in the undergrowth
Posts: 19
Threads: 3
Joined: 2013-05-07
Points:
0
Reputation: +11
(2013-06-20, 01:13)Gizbeat Wrote: (2013-06-20, 00:54)hbcsavage Wrote: (2013-06-20, 00:15)Gizbeat Wrote: Done. Let me know if it's successful. I've used both methods and they should work fine.
Ok so did everything in the tutorial and now i have no network. Permissions are correct. Should i have modem.bak and modem.img in firmware folder? Properties for New modem.img file is rw- r-- r-- and properties for modem.bak is rwx rwx rwx i dont know if that helps in figuring out anything.
Doesn't matter where modem.bak is. That's just the backup in case there's a problem. modem.img should be in /system/etc/firmware. Is it?
Yes it is. permissions for old modem.img before i renamed it to modem.bak was rwx rwx rwx also when i copied modem.img to system/etc/firmware i had to manually change the permissions to rw- r-- r-- if that matters at all.
Posts: 3,184
Threads: 555
Joined: 2013-02-10
Points:
21,230
Reputation: +3638
(2013-06-20, 01:20)hbcsavage Wrote: (2013-06-20, 01:13)Gizbeat Wrote: (2013-06-20, 00:54)hbcsavage Wrote: Ok so did everything in the tutorial and now i have no network. Permissions are correct. Should i have modem.bak and modem.img in firmware folder? Properties for New modem.img file is rw- r-- r-- and properties for modem.bak is rwx rwx rwx i dont know if that helps in figuring out anything.
Doesn't matter where modem.bak is. That's just the backup in case there's a problem. modem.img should be in /system/etc/firmware. Is it?
Yes it is. permissions for old modem.img before i renamed it to modem.bak was rwx rwx rwx also when i copied modem.img to system/etc/firmware i had to manually change the permissions to rw- r-- r-- if that matters at all.
Ok, give it a go with rwx rwx rwx. I assume you're rebooting the phone after permission changes.
You like this post
Two roads diverged in a yellow wood,
And sorry I could not travel both
And be one traveler, long I stood
And looked down one as far as I could
To where it bent in the undergrowth
Posts: 19
Threads: 3
Joined: 2013-05-07
Points:
0
Reputation: +11
(2013-06-20, 01:23)Gizbeat Wrote: (2013-06-20, 01:20)hbcsavage Wrote: (2013-06-20, 01:13)Gizbeat Wrote: Doesn't matter where modem.bak is. That's just the backup in case there's a problem. modem.img should be in /system/etc/firmware. Is it?
Yes it is. permissions for old modem.img before i renamed it to modem.bak was rwx rwx rwx also when i copied modem.img to system/etc/firmware i had to manually change the permissions to rw- r-- r-- if that matters at all.
Ok, give it a go with rwx rwx rwx. I assume you're rebooting the phone after permission changes.
Yes rebooted after permission change in phone info for baseband settings it says MOLY.WR8.W1248.MD.WG.MP.V7.P1,2013/05/08 14:45 Also had Superuser and SuperSU installed on phone. Dont know if this makes a difference.
You like this post
Posts: 3,184
Threads: 555
Joined: 2013-02-10
Points:
21,230
Reputation: +3638
(2013-06-20, 01:44)hbcsavage Wrote: (2013-06-20, 01:23)Gizbeat Wrote: (2013-06-20, 01:20)hbcsavage Wrote: Yes it is. permissions for old modem.img before i renamed it to modem.bak was rwx rwx rwx also when i copied modem.img to system/etc/firmware i had to manually change the permissions to rw- r-- r-- if that matters at all.
Ok, give it a go with rwx rwx rwx. I assume you're rebooting the phone after permission changes.
Yes rebooted after permission change in phone info for baseband settings it says MOLY.WR8.W1248.MD.WG.MP.V7.P1,2013/05/08 14:45 Also had Superuser and SuperSU installed on phone. Dont know if this makes a difference.
Superuser and SuperSU shouldn't make a difference other than allowing you to copy inside /system.
So is it working now with rwx rwx rwx?
Two roads diverged in a yellow wood,
And sorry I could not travel both
And be one traveler, long I stood
And looked down one as far as I could
To where it bent in the undergrowth
Posts: 19
Threads: 3
Joined: 2013-05-07
Points:
0
Reputation: +11
(2013-06-20, 01:45)Gizbeat Wrote: (2013-06-20, 01:44)hbcsavage Wrote: (2013-06-20, 01:23)Gizbeat Wrote: Ok, give it a go with rwx rwx rwx. I assume you're rebooting the phone after permission changes.
Yes rebooted after permission change in phone info for baseband settings it says MOLY.WR8.W1248.MD.WG.MP.V7.P1,2013/05/08 14:45 Also had Superuser and SuperSU installed on phone. Dont know if this makes a difference.
Superuser and SuperSU shouldn't make a difference other than allowing you to copy inside /system.
So is it working now with rwx rwx rwx?
Nope same result. I have no clue whats wrong. Its like it blocks my network signal. Was hoping this helped. when i put settings back to normal my network comes back.
You like this post
Posts: 3,184
Threads: 555
Joined: 2013-02-10
Points:
21,230
Reputation: +3638
(2013-06-20, 01:50)hbcsavage Wrote: (2013-06-20, 01:45)Gizbeat Wrote: (2013-06-20, 01:44)hbcsavage Wrote: Yes rebooted after permission change in phone info for baseband settings it says MOLY.WR8.W1248.MD.WG.MP.V7.P1,2013/05/08 14:45 Also had Superuser and SuperSU installed on phone. Dont know if this makes a difference.
Superuser and SuperSU shouldn't make a difference other than allowing you to copy inside /system.
So is it working now with rwx rwx rwx?
Nope same result. I have no clue whats wrong. Its like it blocks my network signal. Was hoping this helped. when i put settings back to normal my network comes back.
What date is your original baseband and what model phone do you have?
You like this post
Two roads diverged in a yellow wood,
And sorry I could not travel both
And be one traveler, long I stood
And looked down one as far as I could
To where it bent in the undergrowth
Posts: 19
Threads: 3
Joined: 2013-05-07
Points:
0
Reputation: +11
(2013-06-20, 01:57)Gizbeat Wrote: (2013-06-20, 01:50)hbcsavage Wrote: (2013-06-20, 01:45)Gizbeat Wrote: Superuser and SuperSU shouldn't make a difference other than allowing you to copy inside /system.
So is it working now with rwx rwx rwx?
Nope same result. I have no clue whats wrong. Its like it blocks my network signal. Was hoping this helped. when i put settings back to normal my network comes back.
What date is your original baseband and what model phone do you have?
Original baseband is MOLY.WR8.W1248.MD.WG.MP.V6.P1,2013/02/27 19:53 and i have model N9589
Posts: 3,184
Threads: 555
Joined: 2013-02-10
Points:
21,230
Reputation: +3638
(2013-06-20, 02:04)hbcsavage Wrote: (2013-06-20, 01:57)Gizbeat Wrote: (2013-06-20, 01:50)hbcsavage Wrote: Nope same result. I have no clue whats wrong. Its like it blocks my network signal. Was hoping this helped. when i put settings back to normal my network comes back.
What date is your original baseband and what model phone do you have?
Original baseband is MOLY.WR8.W1248.MD.WG.MP.V6.P1,2013/02/27 19:53 and i have model N9589 Hmm.. That's the oldest baseband. There's was at least one other version between these. You can try that. I'll try to get it up within the next day or so. Sorry, but I need to give this a rest for now and I need to search to find it.
You can also try the newest baseband with newer firmware if you can find it. I can't guarantee that will solve anything, but it could be a conflict between the older firmware and newer baseband. Might be worth a shot if you have access to newer firmware.
razornova and hbcsavage like this post
Two roads diverged in a yellow wood,
And sorry I could not travel both
And be one traveler, long I stood
And looked down one as far as I could
To where it bent in the undergrowth
Posts: 19
Threads: 3
Joined: 2013-05-07
Points:
0
Reputation: +11
(2013-06-20, 02:11)Gizbeat Wrote: (2013-06-20, 02:04)hbcsavage Wrote: (2013-06-20, 01:57)Gizbeat Wrote: What date is your original baseband and what model phone do you have?
Original baseband is MOLY.WR8.W1248.MD.WG.MP.V6.P1,2013/02/27 19:53 and i have model N9589 Hmm.. That's the oldest baseband. There's was at least one other version between these. You can try that. I'll try to get it up within the next day or so. Sorry, but I need to give this a rest for now and I need to search to find it.
You can also try the newest baseband with newer firmware if you can find it. I can't guarantee that will solve anything, but it could be a conflict between the older firmware and newer baseband. Might be worth a shot if you have access to newer firmware.
Ok thanks ill wait for the in between baseband. Thanks for all the help.
|
| Possibly Related Threads… |
| Thread |
Author |
Replies |
Views |
Last Post |
| |
[Modify] Modify / Change Partitions MTK6582, MTK6589, MTK6592, MTK6589T, MTK6577 |
GizBeat |
24 |
45,203 |
2019-05-09, 07:04
Last Post: valassinhen
|
| |
How to fix bluboo s3 invalid imei numer |
The FireKyuubi |
2 |
2,266 |
2018-07-17, 05:07
Last Post: The FireKyuubi
|
| |
[How-To] Fix IMEI and NVRAM to bluboo Dual |
BZonta |
6 |
3,585 |
2018-04-07, 23:20
Last Post: BZonta
|
| |
Help Fix Sony Xperia C c2305 MT6589 Dead boot |
madboy46 |
14 |
29,440 |
2018-01-26, 23:38
Last Post: fawzy ads
|
| |
[Question] How to fix softbrick/bootloop |
lionhart21 |
12 |
13,586 |
2017-08-19, 21:30
Last Post: muslimsoap
|
Users browsing this thread: 2 Guest(s)
|
|
![[-]](https://www.chinaphonearena.com/forum/images/collapse.png "[-]")
