[Question] Cwm or twrp on Posh Mobile Titan HD E500

[KrypticProducti]

Hi i have had a Posh Mobile titan HD e500 for about 3 weeks now and after many attempts to root the phone i finally found Vroot which worked flawlessly, however now i am not able to flash cwm or twrp recovery because i cant get any droid tool such as ADB or Mtk droid tools to read my phone. when i go to device manager it reads as posh mobile device but when i plugged it in to kingoroot it says (posh) HTC Device. so i tried installing htc drivers and that didnt work either. ive looked continuously for 3 days now, any help is appreciated

[Nephalem]

Did you install PdaNet VCOM drivers initially?
I used this driver pack: [Only registered and activated users can see links Click here to register]
It works ok for me, MTK Droid Tools recognizes my phone properly. I used PdaNet
I also used USBdeview from here [Only registered and activated users can see links Click here to register]
Sometimes PC detects the phone differently on each start up so the phone's fingerprint gets duplicated. Try removing all of MTK or Android or Posh or HTC or Linux CD devices. Even Mass Storage devices that you don't recognize, uninstall them.
Uninstall current drivers also, then try again.

[los33]

I have rooted and modified this phone since it first came out so here are some of the things i used and made to root the phone.

Steps:
1. Turn the phone off and connect usb to pc.
2. Check device manager on pc and find unknown device (mt preloader), install driver from drivers archive and disconnect the usb again
3.Start SP Flash tools and load the scatter file for the Titan and then double click recovery partition and choose the cwm image file
4.Press download on sp flash tools, then make sure the phone is off and connect the usb again and it should load the cwm recovery
5. Press and hold Volume UP & power to load cwm.

Drivers: (this has the preloader and all in it)
[Only registered and activated users can see links Click here to register]

SP Flash Tool:
[Only registered and activated users can see links Click here to register]

CWM:
[Only registered and activated users can see links Click here to register]

[Joe staff]

I finally got it with your help, but I needed to get a more up-to-date version of SP Flash Tool then download the SuperSU.zip file for the binaries.

I had found this tutorial ([Only registered and activated users can see links Click here to register]) and was able to skip with the CWM you provided.

You must also press the 'Delete China' button to prevent the factory recovery from reinstalling itself.

[los33]

I finally got it with your help, but I needed to get a more up-to-date version of SP Flash Tool then download the SuperSU.zip file for the binaries.

I had found this tutorial ([Only registered and activated users can see links Click here to register]) and was able to skip with the CWM you provided.

You must also press the 'Delete China' button to prevent the factory recovery from reinstalling itself.
Posh had released version V08 of there kitkat version that included new things to stop root and delete custom recoveries.

But after i complained of issies they pulled the V08 firmware. I went back to V05 which is the same version without all the root blockers.

[wonderdxk]

Hi i'm trying to install Viper4android in posh titan e500a throws me an error the busybox and root, have the version V05. I'm already root and cwm , install the busybox free, thanks

[KrypticProducti]

Hi i'm trying to install Viper4android in posh titan e500a throws me an error the busybox and root, have the version V05. I'm already root and cwm , install the busybox free, thanks

How do you get version V05?

[tonyskyline]

I have a rooted posh with cwm . my phone stuck on startup screen. I tried to flash the vo5 rom on my vo8 . but it aborted . how can I get the stock rom for the vo8

[wonderdxk]

he version v05 is available through this link [Only registered and activated users can see links Click here to register]

install the viper4android editing the file, audio_effects.conf and adding the files in viper4android.apk /assets libv4a_FX_xxx

The V08 no is available download for the moment.

[los33]

Hi i'm trying to install Viper4android in posh titan e500a throws me an error the busybox and root, have the version V05. I'm already root and cwm , install the busybox free, thanks

You are using an older viper4android not compatible with 4.4.2, but either way the driver will not install since mediatek included a audio driver for this phone making it impossible for us to do anything other then use a standard DSP Manager that works with the current driver.

Edit: i will have v08 uploaded soon