[Question] Help!! with my bricked phone

[lexileone]

Hello There!!
I was trying to get back to stock rom
And Always Getting this no space error 5069 While Flashing
After searching i found that format will fix this and i can flash like a charm
But after formatting my Device Is dead
no boot, no charging, no recovery
I'm Trying TO whole flash but I'm there is no option for that only Getting without bootloader one
Then i've checked it memory in memory test option now i'm getting
Nand Flash Not Detected
Plz!!! tell me what i can do to take my phone back to life
The Phone is out of warrenty

Phone: Micromax a120 canvas 2 colours
Chipset: mtk 6582

When I try these things
1) after format+download it says no space error
2)then i tried firmware upgrade i'm getting " Failed to get PMT info " and "Invalid partition table" error in spft v3.xx

The Rom is original stock and needrom one
So the rom is not an issue

Plz!! HElp guys , many people are facing this problem not a single fix they got till now

If it works it will be life savior for them too

[kodor665]

It is not error This is a common message to eMMC memory
Now your phone is enter in the Download mode via the boot part. eMMC (in PC Device Manager appears Preloader port)
For Upgrade(forced check item "Preloader" by Flash Tool in Download list!) you must first of all download new Preloader
Your good(native) Preloader replace itself with new one in flash boot.
But(Attention !) if it will be wrong Preloader for initialization phone's hardware
in the future will always result in an error 4032 ("...Init (external) DRAM failed")
It is necessary to try download another Preloader
In this case connect to device in so-called GPIO boot mode (in PC Device Manager appears MTK USB Port: USB\Vid_0e8d&Pid_0003(bootrom com port)) Find this connect: press-hold some button("Vol+" ??-Try another if no) + connect : see Dev.Man.
For this first of all make backup good(native) preloader.Fortunately, the format is not given to ruin it (was only available option "without boot")

[lexileone]

Thanks for replying

But I can't get what to do

Will U explain it a little more

By the way spft can recognize my phone in no battery mode