[ROM] OUKITEL U7 PLUS - STOCK ROMS & TWRP

[rlaptev]

Dear Cleopatra, I see that you help a lot of people ad I think you will help me...
I have a Oukitel U7 Plus since december and i broke the lcd... I ordered one new to change but when I connect the new one its all white and I dont see nothing... the supplier directed me to this forum and suggested to flash the phone... I tried to flash but he PC does not recognize the phone and it's not possible to do nothing not even to hard reset because i just see white lcd...
Please give me a help on what to do...
Thank you very much!!! :-)

Hi, I wonder, did you find any solution?

@Diabloman and @rlaptev :

Above all ... I have some questions to ask you :

1) Are you sure to have put the lcd in the right way ?
2) Are you sure to not have damaged the phone with the screwdriver ?
3) Are you sure that the lcd is fully compatible with your phone ?

Regards

I have the same problem as @Diabloman. And also the sellers advised me to flash firmware. As for 1) and 2) I'm sure that all right because an old display although it has some damages but is working. But I'm not sure of 3) . Have u any ideas?

[Cleopatra]

@rlaptev :

To buy a not fully compatible spare part.
It happened to somebody else.
It is not common, but it can happen.
Look for similar lcd on the net.
Try to understand serial numbers (or something like that).
Compare similarities and differences from different sellers.

[rlaptev]

@rlaptev :

To buy a not fully compatible spare part.
It happened to somebody else.
It is not common, but it can happen.
Look for similar lcd on the net.
Try to understand serial numbers (or something like that).
Compare similarities and differences from different sellers.

Thank you. So it's better to return LCD back.

[Cleopatra]

@rlaptev :

To buy a not fully compatible spare part.
It happened to somebody else.
It is not common, but it can happen.
Look for similar lcd on the net.
Try to understand serial numbers (or something like that).
Compare similarities and differences from different sellers.

Thank you. So it's better to return LCD back.

I did not say that.
Before to return lcd back, look for similar lcd on the net.
Before accusing the seller ... try to understand the lcd issue.

[rlaptev]

@rlaptev :

To buy a not fully compatible spare part.
It happened to somebody else.
It is not common, but it can happen.
Look for similar lcd on the net.
Try to understand serial numbers (or something like that).
Compare similarities and differences from different sellers.

Thank you. So it's better to return LCD back.

I did not say that.
Before to return lcd back, look for similar lcd on the net.
Before accusing the seller ... try to understand the lcd issue.

Ok, thank u.

[Cleopatra]

Oukitel U7 Plus - NEW TWRP 3.0.3 for Nougat



This TWRP is intended for the next Nougat firmware version :

ro.build.id=NRD90M
ro.build.display.id=OUKITEL_U7_Plus_V16.0_20170609
ro.build.version.incremental=1497090504
ro.build.version.sdk=24
ro.build.version.release=7.0
ro.build.version.security_patch=2017-06-05
ro.build.date=2017 06 10 18:28:19 CST
ro.build.date.utc=1497090499
ro.build.flavor=full_hct6737m_65_n-user


Download Link :

https://www.needrom.com/download/u7-plus...ugat-twrp/


INSTALLATION STEPS :

1) Above all download and install the OTA V16.0_20170609 :



After barely managing to find the OTA zip, finally I have found the it

The OTA zip is in a non-conventional place/path. I wish to share it with all.
Maybe some developers might be interested to it.
OUKITEL_U7_Plus_V16.0_20170609 OTA zip :

https://mega.nz/#!75swBA6a!X5dj26qLwA29R...ZAxy59KTIA

2) Tap on Settings --> About phone --> Tap Build number seven times.
Developer options --> OEM unlocking enabled and USB debugging enabled.

3) Download SuperSU v2.82 zip and BusyBox 1.26.2 zip at the next link :

http://www.mediafire.com/file/tdtv1xdy2m...e_2017.rar

4) Unrar the rar. Copy the 2 zips onto your microSD.
5) Open SP Flash Tool.
6) Unrar U7_Plus-TWRP_3.0.3-NEW.rar
7) Load the scatter file inside the folder.
8) Select Download Only option.
9) Click Download.
10) Connect your turned off phone to the pc with USB cable.
11) Disconnect the USB cable.
12) Enter onto twrp recovery (volume up + power buttons simultaneously).
13) Select the first white line and press volume down.

VITAL STEPS :

14) Tap Install, Select Storage, Micro SDCard, OK.
15) Tap on SR1-SuperSU-v2.82-SR1-20170608224931.zip
16) Swipe to confirm Flash.
17) Tap on Reboot.
18) Tap on the icon of SuperSU to activate it.
19) Repeat same steps for Busybox v1.26.2 zip

I strongly recommend you to install the next apk (root required) :

https://play.google.com/store/apps/detai...boot&hl=en

It is useful to avoid to press volume up + power buttons to enter onto twrp.

[arnegson]

What is happening? I downloaded OTA and would install it and ended up recovering and can not get into the program. Every time I try to start the phone, I get into recovery. And it's 3.0.3 that I have but I can not start the phone so it's possible to call it ??????

[Cleopatra]

What is happening? I downloaded OTA and would install it and ended up recovering and can not get into the program. Every time I try to start the phone, I get into recovery. And it's 3.0.3 that I have but I can not start the phone so it's possible to call it ??????

You cannot install the OTA update with TWRP recovery and rooted phone !

STEPS TO DO BEFORE to install the OTA update :

1) Flash the old Nougat firmware (Firmware Upgrade option).
2) Tap on System Updater icon.
3) Download the OUKITEL_U7_Plus_V16.0_20170609 OTA
4) Install the OUKITEL_U7_Plus_V16.0_20170609 OTA

[gwendo38180]

OUKITEL U7 Plus - NEW stock rom V20.0_20161220



ROM INSTALLATION STEPS :

1) Download the latest version (5.1648.00) of SP Flash Tool :

http://www.mediafire.com/file/qwgshpgipx...648.00.rar

2) Download the stock firmware V20.0_20161220 :

https://mega.nz/#!C49WQbbT!YjPK66SNtsKrV...RDMPhDfBcs

3) Flash the firmware with SP Flash Tool (Download Only mode).


OUKITEL U7 Plus - NEW TWRP 3.0.3



TWRP INSTALLATION STEPS :

a) Tap on "Settings" -->"About phone" --> "Build number".
b) Tap 7 times on "Build number".
c) Tap on "Developer option" and enable "OEM unlocking" and "USB debugging".
d) Download the latest version of SP Flash Tool :

http://www.mediafire.com/file/qwgshpgipx...648.00.rar

e) Download the NEW TWRP 3.0.3 at the next link :

http://www.needrom.com/download/u7-plus-twrp-3-0-3/

f) Turn off the phone.
g) Open SP Flash Tool, load the scatter file and click on Download.
h) Connect your phone to your pc with USB to start the flash process.
i) When it finished, press "volume up" and "power" buttons simultaneously.
j) Select the first white line with volume up.
k) Press volume down to confirm.
l) Enjoy.

hi
i'm french sorry if i write bad
i can't get the v.20

Votre téléchargement ne peut pas se poursuivre, car cela vous ferait dépasser le quota de transfert gratuit alloué à votre adresse IP.

how can i do please?

[Cleopatra]

@gwendo38180 :

Your french language :

Votre téléchargement ne peut pas se poursuivre, car cela vous ferait dépasser le quota de transfert gratuit alloué à votre adresse IP.

English translation :

Your download can not continue because this will cause you to exceed the free transfer quota allocated to your IP address.

SUGGESTION :

Go from a friend or neighbor,
and try to download the V20 firmware using his pc.