[ROM] rom for BMXC K107 tablet pls

[motordig]

Dear @motordig excuse me my english very bad

my old problem sd card not working and gps working but not signal .

i am flashed proinfo.bin and lk.bin with your orginal fix files .. screen not work.

i am reflash only proinfo.bin with your orginal fix and all k107 files
.. now screen working sd card and working gps low signal .

now my problem only gps low signal .
which file will be edited for Low signal GPS . or me need driver for gps low signal
thx all .

My GPS works well. Verify the operation of GPS is necessary to spend outdoors ( not in the apartment). Or testing using MTK ingenering mode.

[kruegerfreddy]

No problem. No edit or no fix proinfo.bin.
Only i am reflashed together k170 and your proinfo.bin
gps and sd card working right

My head is quite confused. HexEditor I know as pictured.
Thanks all !!!

[PAtr0n]

Hi Guys!

I need help. I have a bricked BMXC K107 (16Gb version, i've checked the NAND chip under the cover). I had read this topic over and over, but no solution...
This board is a K107MB 5.0. I've downloaded this ROM: vKB076N that listed above.
Every scatter file in it isn't working for my tablet, when i use BeeTools.
When i connect the tablet it says "S_STORAGE NOT MATCH (Error code 3183)" See attached picture.
So the flash process started, but, problem occured, maybe with the NAND storage size?

What should i do now?

[PAtr0n]

Hi Guys!

I need help. I have a bricked BMXC K107 (16Gb version, i've checked the NAND chip under the cover). I had read this topic over and over, but no solution...
This board is a K107MB 5.0. I've downloaded this ROM: vKB076N that listed above.
Every scatter file in it isn't working for my tablet, when i use BeeTools.
When i connect the tablet it says "S_STORAGE NOT MATCH (Error code 3183)" See attached picture.
So the flash process started, but, problem occured, maybe with the NAND storage size?

What should i do now?

Anybody????? Please help guys!

[Elephone Tomi]

The firmware for the K107 v4.1 link isn't working anymore? Where can I get a working firmware for it please! The tablet has the mtk8321a on board with 1gb ram and 16b rom. The usual set up.

[boomer123]

same situation as you guys,my tab died while recharging,didn't even had tried to install any dumb apps on it...i wander if isn't a memory issue after all..like a broken hard drive

[contr143]

Доброго времени суток. У меня планшет BRAND: BMXC
Материнская плата:
Sim2
K107-MB-V3.0
2015-9-30
K960AC-V3.0
PD:4+B1
160306
K107ACV3.0_vKBZ004_SMT_K960
K107AC-V3.0 BLDA7
B20160217_1G16G
После падения и замены LCD display (BP096WX1-100) на новый экран черный. Пробовал прошивки - экран реагирует на кнопку пуск и идет подсветка, но экран черный и система не запускается. Прошу помощь в нахождении прошивки для этой ревизии планшета. Заранее благодарен.

[contr143]

Good day. I have a BRAND tablet: BMXC
Motherboard:
Sim2
K107-MB-V3.0
2015-9-30
K960AC-V3.0
PD:4+B1
160306
K107ACV3.0_vKBZ004_SMT_K960
K107AC-V3.0 BLDA7
B20160217_1G16G
After dropping and replacing the LCD display (BP096WX1-100) on the new screen is black. Tried the firmware - the screen responds to the start button and goes backlighting, but the screen is black and the system does not start. I ask for help in finding the firmware for this revision of the tablet. Thanks in advance.

[sivhik]

K960_vKBZ005_SMT_C3_L4
K107BC-В6.0 BLDA7 B20170221_1G16G. есть вот такая прошивка?

[contr143]

K960_vKBZ005_SMT_C3_L4
K107BC-В6.0 BLDA7 B20170221_1G16G. есть вот такая прошивка?

Спасибо за сообщение. Я еще не использовал эту прошивку. Я постараюсь найти и применить.