OS : Leagoo OS 2.0 (based on Android 6.0 Marshmallow)
Rear Camera : 13.3 megapixel 4864x2736
Front Camera : 8.3 megapixel 3840x2160
2 Micro SIM cards slots (dual SIM or single SIM+micro SD)
2G : GSM 850/900/1800/1900 MHz
3G : WCDMA 900/2100 MHz
4G : FDD-LTE 800/900/1800/2100/2600 MHz
WIFI : 802.11 a/b/g/n
Picture format : BMP, GIF, JPEG, PNG
Music format : AAC, ALAC, AMRA, APE, M4A, MKA, MP3, FLAC, WAV
Video format : ASF, AVI, FLV, MKV, MP4, MOV, RM, RMVB, WMV
Colors available : Gray, Golden and Rose+Golden
If I am being completely honest, compared with the previous reviews,
I think that Leagoo T1 4G is the best.
In the next pics you can see the box and the phone details (front, back and edge).
You can see also the package contents. You will find the following objects :
1) power adapter
2) usb cable
3) two sim needle
5) use manual
6) guarantee certificate
When I pushed the power button for the first time,
after that the boot process is finished,
I have noticed that the configuration wizard ask you for a very interesting option.
This is the first time I see it.
I have never experienced that option in my previous phones :
"If you use another Android device,
you can quickly copy your current setup to this T1"
If your Leagoo T1 4G delivered to you with the firmware 160726 installed by default,
when it will be connected, it will ask you for the 160819 software update.
I suggest you to make this update.
Follow carefully the instructions on the screen.
The phone will automatically reboot to install the update. Be patient.
The next screenshots show you the old firmware and all the update phases :
When you insert a microSD card into the Leagoo T1 4G,
you will be asked if you want to use it like portable storage or like internal storage.
The next screenshots show you what I just explained :
Other two marvellous options caught my attention.
I have never experienced them in my previous phones.
They are the following :
1) "Use LTE services to improve voice and other communications".
2) "Download large files faster using Wi-Fi and 4G/3G at the same time".
But wait, that is not all. There is another noteworthy option.
When you take a screenshot (power & volume down buttons simultaneously),
it appears a panel that gives you the chance to modify the screenshot :
The Leagoo T1 4G has no physical Home button.
It has on-screen buttons (return, home & themes/wallpapers/widgets/effects).
The next screenshots show Home screen, System Tools & "voice search" apk :
The next pic/screenshot show led notification and storage informations.
The led notification (mail notification, in this case) is bright enough (blue light) :
I am very satisfied with both Rear Camera & Front Camera.
They take photos fully resolved.
The next first shot by rear camera, the next second shot by front camera :
AnTuTu Benchmark - Ranking & technical details :
DevCheck System Info - Technical details :
GPS - Details :
The GPS works fine. Tested with "GPS Test Plus".
BATTERY - Details :
The test has been performed in conditions of turned off screen only.
The view of the display seems clear from every angles.
The next screenshot show the display informations ("Display Tester" apk) :
Audio - quality and settings :
The speaker sounds kind of cool.
When you listen music without headphones,
I suggest you to do not lay the phone on the table.
VERY IMPORTANT :
The volume of speaker is low by default, also at the highest volume.
But do not worry, there is an easy solution to fix it. Please follow carefully the next steps :
1) Type the next sequence (Dialer) to gain access to Engineer Mode :
2) Tap on Audio (EngineerMode -Hardware Testing).
3) You will see these next sections :
4) "Normal Mode" is set to 128 (Max Vol) by default :
5) "Headset Mode" is set to 124 (Max Vol) by default :
6) "LoudSpeaker Mode" is set to 128 (Max Vol) by default :
7) "HeadSet_LoudSpeaker Mode" is set to 112/160 (two Max) :
8) I have increased the "Max Vol" to 150
Do not increase the Max Vol over 150 ! It could damage irreparably the speaker of the phone !
I have increased only "Normal Mode" & "LoudSpeaker Mode".
Please see the next screenshots :
Then, I have tested all the ringtones at the highest volume : no distortion
Then, I have installed "YouTube" apk to test audio and video quality.
Nice colors/contrast and sound. I watch the next videoclip :
"Katy Perry - Dark Horse (Official) ft. Juicy J" VEVO
- If you do not want to break the bank.
- If you wish a decent smartphone.
4) Turn off the phone.
5) Open SP Flash Tool, load the scatter file and click on Download.
6) Connect your phone to your pc with USB to start the flash process.
7) When it finished, press "volume up" and "power" buttons simultaneously.
8) When appears the writing "Leagoo" release immediately the buttons.
I just bought the Blu Life Max which is very similair to the Leogoo t1. It has the mt6737, 2gb RAM, and Android marshmallow. I cannot flash TWRP for my phone beause I do nto have a scatter file. I was wondering how you were able to get the scatter files for your phone.