[Solved] the bad off hero h7500+ gps, hsdpa, auto brihgtness is poor and more

[dikizahrudin]

I just buy hero h7500+ but lot off minor
1. Not stable off hspa ( 3g )
2. Poor for using gps ( is take long for locking after is locking sudenly is searching again but mostly is not locking at all)
3. Not much of custom rom which i can decide for my flavour
4. Batery is not true 2800 mAh
5. This phone is only 2 frekuensi of wcdma ( 3g ) network not recomand
6. Earpice and speaker is not good.
7. Sensor for auto brightness is not working
That all if any body can solved that problem please i wait for.

Thanks regrads to every one

[GizBeat]

1 - Please see the forum. There is a 3G fix you can try. My 3G holds a signal flawlessly and I live in the boonies of SE Asia.

2 - As of yet there are no GPS fixes released. My GPS performs fairly well. Usually getting a fix within a couple minutes and holding the fix. I haven't tested it extensively though.

3 - This phone just came out 2 weeks ago... It's got a bigger variety of ROMs and mods than any other MTK6589 phone available. Likely you will see many more to come in the near future.

4 - The current measurements of the battery are ranging from about 2300-2600. Not bad. Rule of thumb for the near future, never expect a China phone's battery to be at true reported capacity. IMO, the battery life is very good - about 5+ hours continuous use. I would have a more solid estimate, but I keep turning off my phone to test new ROMs and mods.

5 - We're actually quite lucky to have 850Mhz as the larger portion of China phones only have 2100.

6 - Yes, the speaker could be better, but it's more than adequate for hands-free calls. The sound in the earpiece could be better as well, but it's loud enough even in noisy environments. There are settings you can try in engineering mode to see if you can get a bit more juice.

7 - There is an auto-brightness fix, however it's had spotty results. I'm waiting for a better one to come around before posting it on the forum.

[pavlis42]

i have to confirm Gizbeats comments. Regarding the GPS, there is only problem with reading the actual speed for some application. With fix i don't have any problem (fix in few seconds), but at the beginning is necessary to update the servers for gps by your location. It could be done for example by EPO function.

[dikizahrudin]

I Just try many thing but the result is nothing i just wait about 10 - 15 minute for gps but the result is not acurate. With epo has been download a gps active but still not good.

Oh for repairing 3g i cannot use your driver cdc its cannot star. I just try in windows 7 and xp

[salanet]

I Just try many thing but the result is nothing i just wait about 10 - 15 minute for gps but the result is not acurate. With epo has been download a gps active but still not good.

Oh for repairing 3g i cannot use your driver cdc its cannot star. I just try in windows 7 and xp

Have you enabled agps? It's disabled by default but fully supported and work very well.

---

I just buy hero h7500+ but lot off minor
1. Not stable off hspa ( 3g )

Without the fix I've stable 3G...

2. Poor for using gps ( is take long for locking after is locking sudenly is searching

Maybe you haven't enabled agps. Here fix happend in seconds...
again but mostly is not locking at all)

3. Not much of custom rom which i can decide for my flavour

stock rom is fine, no big bugs. Why you want customs?

4. Batery is not true 2800 mAh

I don't care. It gives me 12+ hours with an intense use. More than this you have got a spare battery in the package.

5. This phone is only 2 frekuensi of wcdma ( 3g ) network not recomand

For italy is fine...

6. Earpice and speaker is not good.

It's not dolby but works...

7. Sensor for auto brightness is not working

It's a software problem, just wait...

[GizBeat]

Diki,

You can try [Only registered and activated users can see links Click here to register] fix. Hopefully it will work out. It should have everything you need. Please let us know your results.

[dikizahrudin]

yup all my problem has solved but i just have to change rom to zopo. then i try your new rom 4.2 it on but after logo zopo it become blank but sound of animation still hear



thanks lot

[GizBeat]

yup all my problem has solved but i just have to change rom to zopo. then i try your new rom 4.2 it on but after logo zopo it become blank but sound of animation still hear



thanks lot

You're welcome. Hope you'll continue to be part of the forum.

I explained that in the beginning of the thread about the problem with the boot animation. The ROM is still loading okay. It is only a problem about displaying the boot animation. The ROM is otherwise very stable. After you see the screen go black, just tap the power button once... You will see Android 4.2.1

That's the ROM Gizbeat is using now and I've had no problems with it.

[ahorntaler]

yup all my problem has solved but i just have to change rom to zopo. then i try your new rom 4.2 it on but after logo zopo it become blank but sound of animation still hear



thanks lot

You're welcome. Hope you'll continue to be part of the forum.

I explained that in the beginning of the thread about the problem with the boot animation. The ROM is still loading okay. It is only a problem about displaying the boot animation. The ROM is otherwise very stable. After you see the screen go black, just tap the power button once... You will see Android 4.2.1

That's the ROM Gizbeat is using now and I've had no problems with it.

Hi Gizbeat,

Thank You for this stable and nice looking ROM.
I've received my Zopo ZP810 three weeks ago and I'm completly content with this phone. The only issue in this ROM is the graphical error in bootanimation (I think it's a driver problem). Hopefully this issue will be solved soon. Primely I got problems with my battery. It drained very fast. Zopo hotline told me to load batteries 6 or 7 times fully, than they should work normally and that's true. JB 4.2 softkeys can be enabled/disabled by inserting "qemu.hw.mainkeys=0" as last file in build.prop (0=enabled, 1=disabled)

[GizBeat]

Thanks. I don't worry too about the boot animation, but it would be great to see it solved, I agree.

There is a short tutorial regarding disabling / enabling virtual keys here [Only registered and activated users can see links Click here to register]