MTK6572 / Karbonn A9+ (Hard Brick) HELP!

[kenzahem]

Hi cleo, i need your help again the method that i tried earlier is not working, it requires a fully booted device which mine is dead boot i need a SP FLASH TOOL flashable stock rom to work. Thanks in advance.

[Cleopatra]

Hi kenzahem !

What's the matter ? Don't worry ... I will try to help you :-)
Please be patient ... I'm downloading all files for you (to control them before to give you).
And then, I will upload them and I will give you the links.

:-)

---

Well ... I've just uploaded a zip that include all necessary files for your device.
I have also put the USB driver into the zip :

http://www.mediafire.com/download/ob850676yxc51qc/A9+.zip

Download AIO Flasher from here :

http://www.mediafire.com/download/ucd0y2fxjl77462/Android_AIO_Flasher_1.40_by_King.of.gsm.7z

Follow the next steps :

1: Turn off the device.
2: Press Volume Up+Power until you see green screen (fastboot)
3: Connect USB and install Drivers
4: Open AIO Flasher In Console (Green) Type

If you see your device then

Select Boot > Select Boot.img> Click Erase > Flash
Select Recovery > Select Recovery.img> Click Erase > Flash
Select System > Select System.img> Click Erase > Flash

Finally from Reboot Menu Select "From Fastboot" > Click Reboot

:-)

[kenzahem]

Hi cleo, thanks but my problems that the device doesnt boot or turn on.

[Cleopatra]

Hi kenzahem !

It's a big issue. Not even any light when you put in charge your device ?

:-)

[kenzahem]

Yes, it doesn't light on when I plug the charger It's so dead.

[Cleopatra]

Dear kenzahem,

if there isn't any light on when you plug the charger, I can't solve your issue.
My opinion is that it is a hardware issue. I have posted (on 05-31-2015, at 04:17 PM) the only solution that I knew.

Desolated :-(

[kenzahem]

Thanks Cleo, but it still detected with my PC. I think there is no issue on the hardware.

---

There is a only way to solve this, by flashing to SP FLASH TOOL.

[Cleopatra]

Hi kenzahem !

You haven't told me that your PC detected your device with USB cable.
However, SP Flash Tool isn't the only possible solution to solve your issue.
At first, try MTK Droid Tool ... and tell me if this software detect your device please.
If MTK Droid Tool will detect your device, I will tell you how to (probably) solve your issue.
There is also another way to solve your issue (using the boot.img that I have given you inside the zip).
Please keep me update on the situation.

:-)

[kenzahem]

Thanks for giving me hope Cleo, as for now I stop finding it's solution. Thanks anyways.