The problem is i think...There is two different mainboard in Inew i2000 the v1.1 and the v2.1...The newer stock roms belongs to second. You guys accidentally flashed wrong firmware for your phones...
If you strip your phones, you can check the pcb version on the motherboard...
And the sollution the "test-spot"!
[Only registered and activated users can see links Click here to register]
There is the spot!
You need to remove the back cover and you need 3 item: a piece of wire, a screwdriver (fot the back cover) and a rubber-ring.
First remove almost all the screw, except next to sd card slot (bottom left corner of the sd card slot)...This screw fix the main board and you can remove the back cover without remove this screw.
Put the battery to right position and fix it with rubber ring to the phone.
Prepare with the flash tools and rom, for flashing...(usb cable conect to the pc, scatter file etc...)
Start the flashing with the downlad button and inmediatly sort the spot with the motherboard screw (what you didn't remove) with the wire.
Waiting for the green circle! And Enjoy!
Pls let me know if you successful!
Here is a KitKat THEMED (it's just 4.2.1) rom:
[Only registered and activated users can see links Click here to register]
(little bit lightweighted and optimized) It's for PCB v1.1
First time do not going to panic...First time boot will be slow...and after that the system need 15 min for find myself...Wait for it!
this is stock 4.2.1 for v2.1:
[Only registered and activated users can see links Click here to register]
Again be carefull with the pcb versions!
Here is the lastest CWM based touch recovery (for pcb v1.1)
[Only registered and activated users can see links Click here to register]
or can you use this:
[Only registered and activated users can see links Click here to register] to create custom touch based recovery for your phones (only mtk)
Best Regards