[Question] invalid imei

[ngopeter]

No signal and invalid Imei number for sumsang s5 GT 19600 and manually searching for network. Any one to help.

[aus9]

Hi

I assume you mean samsung and I wonder as you have no working radio bands if you have a fake?

secondly you may have a clone and I wonder if you mean model i9600?

If you can get into playstore install cpu-z and run it to see if it matches the specs you think you should have.

Alternatively run mtkdroid tools with actually flashing, I don't use windows but other user say it detects fake cpu reports

2) also try easy solution first?
system settings turn off then on the sim management and see if that makes a difference

3) Is this a dual sim? I am guessing you have a clone.

sim slot 1 is the best and have you inserted it fully?

good luck

[ngopeter]

Just had a close look at the model number and realized that is accually GT- i9600
Android version- 4.4.2
Baseband version- i9600XXUAMDE
Kernel version- 3.4.5 linux@Xzserver #1 thu Jul 10 20:38:41 CST 2014
Build number-JDQ39.i9600ZSUAMDF
Custom build version- Galaxy.20140710.A9FM.V019

Single sim.
Tried to have it flashed but it wasn't responding.

[WuddaWaste]

Check out our tutorial on how to fix an invalid IMEI:
[Only registered and activated users can see links Click here to register]

[aristarlight]

Just had a close look at the model number and realized that is accually GT- i9600
Android version- 4.4.2
Baseband version- i9600XXUAMDE
Kernel version- 3.4.5 linux@Xzserver #1 thu Jul 10 20:38:41 CST 2014
Build number-JDQ39.i9600ZSUAMDF
Custom build version- Galaxy.20140710.A9FM.V019

Single sim.
Tried to have it flashed but it wasn't responding.

¿have you already fix this problem of invalid imei number? i recently purchased one of this exact model gt-19600.
and i got the same problem after a factory reset
imei
invalid/01

[Athos]

Hi have you tried the method that WuddaWaste linked to in post #4 above?

Alternatively you can try this method.
From your dialer, type in *#*#3646633#*#*

Go to CD Info> Radio Info. At the top is an AT+ prompt. enter the following:

Code:

AT +EGMR=1,7,”IMEI #1"
Then
AT +EGMR=1,10,”IMEI #2”

Imei#1 and imei#2 are your personal imeis. Just replace them.
Also, the prompt will have an automated "AT+" but make sure to put a space in between "T" and "+"