I've managed to put custom CWM on NO.1P7 but now it don't boot up....
It showed me CWM once and now it's dead..... No combination of button work.........
I'm really going mad.. any tips??!?
Is your phone recognized with MTK Droid Tools? When you plug it in, does the main screen info come up?
First thing to try and do is flash back the stock firmware.
Two roads diverged in a yellow wood,
And sorry I could not travel both
And be one traveler, long I stood
And looked down one as far as I could
To where it bent in the undergrowth
(2013-06-25, 17:58)Gizbeat Wrote: Is your phone recognized with MTK Droid Tools? When you plug it in, does the main screen info come up?
First thing to try and do is flash back the stock firmware.
I have a backup of stock..
but it not be recognized by my pc..... when i put usb cable "Unknown Device" :/
I'll ask again. When you run MTK Droid Tools, does your phone's info come up on the main screen.
Two roads diverged in a yellow wood,
And sorry I could not travel both
And be one traveler, long I stood
And looked down one as far as I could
To where it bent in the undergrowth
(2013-06-25, 18:03)newlife229 Wrote: I have a backup of stock..
but it not be recognized by my pc..... when i put usb cable "Unknown Device" :/
I'll ask again. When you run MTK Droid Tools, does your phone's info come up on the main screen.
No... No info!
The only thing I can recommend is removing all drivers and trying to install PDAnet drivers.
If your phone isn't powering on to at least the logo and your phone isn't recognized, it probably means you're hard bricked and can try to find someone with a RIFF box and MTK experience to format the EMCC.
You like this post
Two roads diverged in a yellow wood,
And sorry I could not travel both
And be one traveler, long I stood
And looked down one as far as I could
To where it bent in the undergrowth
(2013-06-25, 18:07)Gizbeat Wrote: I'll ask again. When you run MTK Droid Tools, does your phone's info come up on the main screen.
No... No info!
The only thing I can recommend is removing all drivers and trying to install PDAnet drivers.
If your phone isn't powering on to at least the logo and your phone isn't recognized, it probably means you're hard bricked and can try to find someone with a RIFF box and MTK experience to format the EMCC.
How i can be hardbricked if only putted a custom CWM with the tutorial...? aww
Anyway not recognized and not boot logo.....
(2013-06-25, 18:11)newlife229 Wrote: No... No info!
The only thing I can recommend is removing all drivers and trying to install PDAnet drivers.
If your phone isn't powering on to at least the logo and your phone isn't recognized, it probably means you're hard bricked and can try to find someone with a RIFF box and MTK experience to format the EMCC.
How i can be hardbricked if only putted a custom CWM with the tutorial...? aww
Anyway not recognized and not boot logo.....
You said you put CM7 as well....?
What scatter file did you use when you flashed CWM and CM7?
You like this post
Two roads diverged in a yellow wood,
And sorry I could not travel both
And be one traveler, long I stood
And looked down one as far as I could
To where it bent in the undergrowth
(2013-06-25, 18:15)Gizbeat Wrote: The only thing I can recommend is removing all drivers and trying to install PDAnet drivers.
If your phone isn't powering on to at least the logo and your phone isn't recognized, it probably means you're hard bricked and can try to find someone with a RIFF box and MTK experience to format the EMCC.
How i can be hardbricked if only putted a custom CWM with the tutorial...? aww
Anyway not recognized and not boot logo.....
You said you put CM7 as well....?
What scatter file did you use when you flashed CWM and CM7?
i've putted only CWM, no rom, i changed only the recovery with MTK
I've used the scatter file generated by SP Flash tool....
(2013-06-25, 18:20)newlife229 Wrote: How i can be hardbricked if only putted a custom CWM with the tutorial...? aww
Anyway not recognized and not boot logo.....
You said you put CM7 as well....?
What scatter file did you use when you flashed CWM and CM7?
i've putted only CWM, no rom, i changed only the recovery with MTK
I've used the scatter file generated by SP Flash tool....
You should generate a scatter with MTK Droid Tools... Not SP Flash
You like this post
Two roads diverged in a yellow wood,
And sorry I could not travel both
And be one traveler, long I stood
And looked down one as far as I could
To where it bent in the undergrowth
![[-]](https://www.chinaphonearena.com/forum/images/collapse.png "[-]")
