does anyone have a complete rom back up for this phone i have bricked my phone and cant seem to find the correct rom everytime i try to flash a rom in flash tools i get error 4032 no matter what pre loader i am trying to flash.. any help thanks
Are you able to see your phone's stats in MTK Droid Tools?
You like this post
Two roads diverged in a yellow wood,
And sorry I could not travel both
And be one traveler, long I stood
And looked down one as far as I could
To where it bent in the undergrowth
(2013-06-30, 21:38)Gizbeat Wrote: What happens when you turn on your phone?
How did you brick it?
Are you able to see your phone's stats in MTK Droid Tools?
thanks for the reply no i cant see phones stats in mtk droid tools first off. Nothing happens when i turn my phone on i was giving a rom from another post i had put on the general china forums i flashed it and it bricked my phone no power black screen the only thing i can do is get it to show up in flash tool when i push and hold the vol up button and plug in usb i can get it to show up in device manager as DA USB VCOM port (com 10 ) tthen the flash starts to run red status bar comes to 100 % then 40 sec later gives me the error ( BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032) )
thats all i can get it to do at the momment have tried MANY preloaders and many full roms. i also uninstalled all drivers pertaining to the phone and tried to re install them im pretty sure i got them there one thing i cant get pdanet to install the drivers so i had to stop the install and just do a manual install of the drivers. hope i am not loosing you. any ideas
What firmware did you try?
Was it SP Flash tool firmware or update from SD?
Was it for your phone?
Did you use a scatter you made - or was it a scatter from the firmware you downloaded?
These questions are basically irrelevant as if you can't boot into CWM, or there's no logo (bootloop etc...), and you can't get MTK Droid Tools to recognize your phone, that's not good news. You'll likely require a RIFF box service to format your EMMC. I'm just trying to determine exactly how it happened.
You like this post
Two roads diverged in a yellow wood,
And sorry I could not travel both
And be one traveler, long I stood
And looked down one as far as I could
To where it bent in the undergrowth
(2013-06-30, 23:06)Gizbeat Wrote: [Only registered and activated users can see links Click here to register]
the first link the guy gave me was in chinese i was able to translate and thought i downloaded the write file..flashed it.. whatever was in the file it bricked my phone then the guy says oooo did you download this one.. its a tottaly different link so i download that one and thats where nothing will work nothing will load to phone at all i guess ill look into what this riff box service is. by the way there was no CWM just the factory recovery.
(2013-06-30, 23:19)bigdaddyclint Wrote: [Only registered and activated users can see links Click here to register]
the first link the guy gave me was in chinese i was able to translate and thought i downloaded the write file..flashed it.. whatever was in the file it bricked my phone then the guy says oooo did you download this one.. its a tottaly different link so i download that one and thats where nothing will work nothing will load to phone at all i guess ill look into what this riff box service is. by the way there was no CWM just the factory recovery.
Well the first link is the link to a thread. The 2nd link is a direct link to a file. I don't know if the firmware link in the thread link is the same as what the 2nd links to or not.
Regardless, that is a horrible name for firmware. 12J25_H29_V02_JB42_V12_HD720P_CN_8P64_MT6589_WCDMA_130603_H It says nothing about B6000. The original link on the BBS doesn't say anything about B6000 either, but maybe the phone has a different name in China.
I meant recovery. Not necessarily CWM. If you can't boot into recovery.
RIFF box is used to format your memory. You can look on XDA for someone with a RIFF box in your country and find out whether they have experience with MTK phones.
You like this post
Two roads diverged in a yellow wood,
And sorry I could not travel both
And be one traveler, long I stood
And looked down one as far as I could
To where it bent in the undergrowth
Also, some people have fixed this error (4032) by flashing firmware from different phones. Obviously the firmware doesn't work, but it was enough to get the phone back to a normal state so that they could flash the appropriate firmware. I'm not sure if they used scatter from their model or the scatter that came with the incorrect firmware.
You need to try and find the right firmware for your phone so you can attempt it both with the correct scatter for your phone and with the scatter from the wrong firmware.
I hope I'm making sense to you.
Example,
1) download Star S5 firmware.
2) Try to flash it with the correct scatter for your phone (search it out or contact the seller for a link to the firmware)
3) Also try to flash it with the scatter that came with that incorrect firmware
You like this post
Two roads diverged in a yellow wood,
And sorry I could not travel both
And be one traveler, long I stood
And looked down one as far as I could
To where it bent in the undergrowth
(2013-06-30, 23:48)Gizbeat Wrote: Also, some people have fixed this error (4032) by flashing firmware from different phones. Obviously the firmware doesn't work, but it was enough to get the phone back to a normal state so that they could flash the appropriate firmware. I'm not sure if they used scatter from their model or the scatter that came with the incorrect firmware.
You need to try and find the right firmware for your phone so you can attempt it both with the correct scatter for your phone and with the scatter from the wrong firmware.
I hope I'm making sense to you.
Example,
1) download Star S5 firmware.
2) Try to flash it with the correct scatter for your phone (search it out or contact the seller for a link to the firmware)
3) Also try to flash it with the scatter that came with that incorrect firmware
yes you are making sense to me ;) i have just found somthing... when the phone was working and mkt droid tools was working i did a back up... just relized that i think i got everything off my phone. anyways in droid tools i clicked the button named to prepair blocks for flash tool and it made all the files that are ususally in a rom i have downloaded to include the scatter file i try to flash the files to the phone and still no luck same error 4032
(2013-06-30, 23:48)Gizbeat Wrote: Also, some people have fixed this error (4032) by flashing firmware from different phones. Obviously the firmware doesn't work, but it was enough to get the phone back to a normal state so that they could flash the appropriate firmware. I'm not sure if they used scatter from their model or the scatter that came with the incorrect firmware.
You need to try and find the right firmware for your phone so you can attempt it both with the correct scatter for your phone and with the scatter from the wrong firmware.
I hope I'm making sense to you.
Example,
1) download Star S5 firmware.
2) Try to flash it with the correct scatter for your phone (search it out or contact the seller for a link to the firmware)
3) Also try to flash it with the scatter that came with that incorrect firmware
yes you are making sense to me ;) i have just found somthing... when the phone was working and mkt droid tools was working i did a back up... just relized that i think i got everything off my phone. anyways in droid tools i clicked the button named to prepair blocks for flash tool and it made all the files that are ususally in a rom i have downloaded to include the scatter file i try to flash the files to the phone and still no luck same error 4032
Try with firmwares from different phones. I'm only going on what has worked for some people in the past. They first had to flash a different firmware before they could get the correct firmware for their phones to work.
The guy that fixed his phone (N9500) had the same error and fixed it by first flashing Star S5 firmware.
As I said, I don't know if they used their scatter or the scatter from the different firmware. I'll leave that part up to your testing. This is just some last things to try before you look up someone with a RIFF box.
Good luck.
You like this post
Two roads diverged in a yellow wood,
And sorry I could not travel both
And be one traveler, long I stood
And looked down one as far as I could
To where it bent in the undergrowth
I have same problem with Bluebo B6000.I´m unable to turn on (it freez on startup logo) and I can´t to get into recovery. I tryed SP flash tool but in all roms are missing preloader and Android_scatter_emmc (so I downloaded some for 6589t and copied it into rom) But it was useless.
![[-]](https://www.chinaphonearena.com/forum/images/collapse.png "[-]")
HDC Galaxy Note 2 B6000 MTK6589T
It says nothing about B6000. The original link on the BBS doesn't say anything about B6000 either, but maybe the phone has a different name in China.
