Plz, Help! N9599T never appears "MTK65xx preloader" icon

[ondeflu]

Please, i need your help. i have readed all the forums about "test point", "meta mode", "flash tool", ... ¡everything! There is no way to put my phone into META mode.
The phone don't charge, no leds, don't start, NOTHING. But, when i plug to the PC through USB, it's detected like "unknown device". Nothing like "Preloader" "VCOM" or similar. No during 3-5 seconds, nothing, never.
There is a point on the board that i think could be the "Test point", because, when i connect it to a screw of the motherboard, the buttons of the screen (back and menu) turns on. But i'm not sure. there is no difference connecting it (USB) with or without doing that.
In another point of the board there is a "KCOL0" inscription, but no one point near to it, only the inscription without little circles or similar points...
I'm really desesperated. Please, if someone has any idea, tell me whatever.

Thanks!

PD: Sorry for my english.

[chrissy_snaith]

Download the drivers pack from herehttp://www.chinaphonearena.com/forum/Thread-Tools-Ultimate-ADB-USB-VCOM-MediaTek-Driver-Pack

Lie the battery on so it will slide in place easily
Push in the USB and within a second slide the battery in
That's how it works on my star z2
You could try holding the volume + key as well when putting USB in

[chrissy_snaith]

To flash:
- use a recent SP Flash tools and make sure you have the usb vcom drivers installed
- preferrably use a self created scatter file (mtk droid tools), I attached the one I used
- open sp flash tool, select only recovery and choose the file attached to this post
- turn off the phone, pull battery and just after putting the battery back connect the usb cable
- recovery should flash
to enter recovery: keep volume up pressed and switch phone on