Posh Titan HD E500A Bricked, Please Help Me :'(

[ciberfan]

Hi to everyone, please somebody help me with my problem.
I'm desperate, I have the following problem I tried to update the software on my phone titan posh OTA hd e500, version E500A_POSH_V08 E500A_POSH_V16 official version. I did it since I left the message software update available, then connected to the wireless network I downloaded the update and restart phone asked me to proceed with the upgrade. Restarting bricked took the logo of lying droid with a red triangle. I looking for google I found this page which offer the room, I downloaded the version E500A_POSH_V08 room and I followed the steps as indicated, the cell was restarted. Then last two days me given for wanting to update the cell officially back but did not follow tutorial one, then on his own initiative I performed the steps listed in this web to charge the room but with the version you sent me posh: E500A_POSH_V16 and Instead of selecting the obcion firmware update, I selected "Format all + donwload" format and jumped me the following message: BROM ERROR: S_DL_GET_DRAM_SETTING_FAIL (5054) [EMI]: Obtaing DRAM failed! [HINT]: please check your load matches to your target which is to be downloaded, and the cell does not turn on, do nothing only recognizes the computer when I connect via USB. Please help me :'(

[rudi021]

Try to choose download not firmware upgrade.i don't have your phone so try with battery inside flash and try without battery.when connect phone with pc and choose,download,check litle box DA,when red bar show up quickly pull out battery and push back.i hope that help you.bye for now from Croatia

[Cleopatra]

Hi ciberfan !

Are these the details about your device ? :

Operating System : Android v4.4 (KitKat)
Processor : 1.7GHz Mediatek MTK6592, Cortex A7 Octa Core
Screen Size : 5.0 Inches, 720 x 1280 Pixels Resolution + IPS Screen
Camera : 13.0MP Primary Camera + 5.0MP Secondary Camera
RAM : 1 GB

You have written : "I selected "Format all" ... very bad option :-(
I've found the next firmwares on the net (link below).
The proper method to flash is the next : watch carefully the next video-tutorial (from minute 5:45 until the end of video) :

[Only registered and activated users can see links Click here to register]&v=ztI8sc8MUNo

Firmwares :

[Only registered and activated users can see links Click here to register]

[Only registered and activated users can see links Click here to register]

[ciberfan]

Hello friends @ rudi021 &Cleopatra, thanks for responding to my call emergency in the end I could solve it myself, it turns flashing what was done with the version of windows xp professional x86 and then calmed my despair, what did in windows 8.1 x86 and it worked pearls. Now I'm seriously wondering if I ignore the OTA update that shows me the phone, since it damages the cell recovery. Thanks friends.