[ROM] Oukitel C5 Pro - TWRP for NOUGAT rom

[Cleopatra]

Oukitel C5 Pro - TWRP for NOUGAT rom





WARNING :

Make sure you have installed the stock rom V1.3_20170414
You will find it at the next link :

https://www.needrom.com/download/oukitel-c5-pro-3/

a) Download SuperSU.zip and BusyBox.zip at the next link :

http://www.mediafire.com/file/tdtv1xdy2m...e_2017.rar

b) Unrar the rar
c) Copy SuperSU.zip and BusyBox.zip
d) Paste SuperSU.zip and BusyBox.zip onto microSD

TWRP for NOUGAT at the next link :

https://www.needrom.com/download/twrp-for-nougat/





FOLLOW VERY CAREFULLY ALL THE NEXT STEPS

1) Install the adb drivers and fastboot commands :

http://www.mediafire.com/file/2df821420x..._1.4.2.rar


2)Unrar the rar. Run “adb-setup.exe”. Hit “Y” to all 3 questions.

3) Tap on Settings --> About phone --> Tap Build number seven times.

Developer options --> OEM unlocking enabled and USB debugging enabled.



STEPS TO DO ONCE ONLY :



4) Plug your phone to PC via USB cable.

Allow the pop up request on your phone to give your PC USB debugging.

5) Open CMD (command prompt).

6) Type the next command :


adb reboot bootloader (and press enter)


7) Now type the next command :


fastboot oem unlock (and press enter)


8) Press volume up (into your phone) to confirm to unlock the bootloader.

You will see in the CMD prompt the next messages :


"Start unlock flow", and when it will be finished, you will see "OKAY".


9) Reboot in normal mode (be patient, when you unlock the bootloader, the phone reset to factory).
10) Now tap 7 times on Build number. Then Developer options, and re-enable USB debugging.

STEPS TO DO EVERY TIME YOU NEED TWRP RECOVERY :

11) Copy the TWRP (recovery.img) into the folder  c:\adb\
12) Connect your phone to the PC via USB cable.
13) Open CMD (command prompt) in the c:\adb\ folder
To open CMD hold shift key and right click , then select "Open Command Window Here".

14) Now type the next command :

adb reboot bootloader (and press enter)

15) Now type the next command :

fastboot boot recovery.img (and press enter)

Please see the next screenshot :



16) Onto TWRP, now - the most important thing - tap on Backup.
17) Check mark on Nvram, Boot, System and Data.
18) Tap on Select Storage, tap on MicroSDCard, tap on OK.
19) Tap Swipe to Backup.

VITAL STEPS :

20) Return to the main menù of TWRP.
21) Tap Install. Tap on Select Storage. Tap Micro SDCard. Tap OK.
22) Tap on SuperSU zip
23) Swipe to confirm Flash.
24) Tap on Reboot.
25) Tap on the icon of SuperSU to activate it.




IMPORTANT :

Please check your two IMEIs.
I discovered my two IMEIs changed when I flashed the V1.3_20170414

 

[Cleopatra]

Oukitel C5 Pro - TWRP 3.1.1 for NOUGAT



WARNING :

Make sure you have installed the stock rom V1.3_20170414
You will find it at the next link :

https://www.needrom.com/download/oukitel-c5-pro-3/

a) Download SuperSU.zip and BusyBox.zip at the next link :

http://www.mediafire.com/file/tdtv1xdy2m...e_2017.rar

b) Unrar the rar
c) Copy SuperSU.zip and BusyBox.zip
d) Paste SuperSU.zip and BusyBox.zip onto microSD

TWRP 3.1.1 at the next link :  

https://www.needrom.com/download/twrp-3-1-1-nougat/


FUNDAMENTAL :

Flash (install) the TWRP with the next Fastboot commands :

fastboot flash recovery recovery.img



[b]FOLLOW VERY CAREFULLY ALL THE NEXT STEPS
[/b]
1) Install the adb drivers and fastboot commands :

http://www.mediafire.com/file/2df821420x..._1.4.2.rar

2) Unrar the rar. Run “adb-setup.exe”. Hit “Y” to all 3 questions.

3) Tap on Settings --> About phone --> Tap Build number seven times.

Developer options --> OEM unlocking enabled and USB debugging enabled.


STEPS TO UNLOCK THE BOOTLOADER

4) Plug your phone to PC via USB cable.

Allow the pop up request on your phone to give your PC USB debugging.

5) Open CMD (command prompt).

6) Type the next command :


adb reboot bootloader (and press enter)


7) Now type the next command :


fastboot oem unlock (and press enter)


8) Press volume up (into your phone) to confirm to unlock the bootloader.

You will see in the CMD prompt the next messages :


"Start unlock flow", and when it will be finished, you will see "OKAY".


9) Reboot in normal mode (be patient, when you unlock the bootloader, the phone reset to factory).
10) Now tap 7 times on Build number. Then Developer options, and re-enable USB debugging.

STEPS TO FLASH THE TWRP 3.1.1


11) Copy the TWRP (recovery.img) into the folder  c:\adb\
12) Connect your phone to the PC via USB cable.
13) Open CMD (command prompt) in the c:\adb\ folder
To open CMD hold shift key and right click , then select "Open Command Window Here".

14) Now type the next command :


adb reboot bootloader (and press enter)

15) Now type the next command :

fastboot flash recovery recovery.img (and press enter)

Please see the next screenshot :



IMPORTANT :

16) After that the flash process is finished :

LONG PRESS ONTO POWER BUTTON until the phone is turned off

17) Hold simultaneously volume up+power buttons
18) Select the first line with volume up button
19) Hold volume down button to confirm
20) Onto TWRP, swipe to allow modification.

21) Change the default language from Russian to your language.

VITAL STEPS :

22) Return to the main menù of TWRP.
23) Tap Install. Tap on Select Storage. Tap Micro SDCard. Tap OK.
24) Tap on SuperSU zip
25) Swipe to confirm Flash.
26) TAP ON DO NOT install - LOOK the next screenshot



27) Tap on the icon of SuperSU to activate it.
28) I strongly recommend you to install the next apk (root required) :

http://www.mediafire.com/file/jjabww73bu...Reboot.rar

This apk is useful to avoid to press volume + power buttons to enter onto twrp.

[Cleopatra]

Oukitel C5 Pro - TWRP 3.2.1 for NOUGAT



WARNING :

Make sure you have installed the stock rom V1.3_20170414
You will find it at the next link :

https://www.needrom.com/download/oukitel-c5-pro-3/

a) Download the latest version of SuperSU and BusyBox at the next link :

http://www.mediafire.com/file/wu9ipho1lg..._SU-BU.rar

b) Unrar the rar
c) Copy SuperSU.zip and BusyBox.zip
d) Paste SuperSU.zip and BusyBox.zip onto microSD

[b]TWRP 3.2.1 at the next link :[/b]


https://www.needrom.com/download/twrp-3-2-1-nougat/
[b]

FUNDAMENTAL :

[/b]
Flash (install) the TWRP with the next Fastboot commands :


[b]fastboot flash recovery recovery.img


FOLLOW VERY CAREFULLY ALL THE NEXT STEPS

[/b]1) Install the adb drivers and fastboot commands :

http://www.mediafire.com/file/2df821420x..._1.4.2.rar

2) Unrar the rar. Run “adb-setup.exe”. Hit “Y” to all 3 questions.

3) Tap on Settings --> About phone --> Tap Build number seven times.

Developer options --> OEM unlocking enabled and USB debugging enabled.


STEPS TO UNLOCK THE BOOTLOADER

4) Plug your phone to PC via USB cable.

Allow the pop up request on your phone to give your PC USB debugging.

5) Open CMD (command prompt).
6) Type the next command :

adb reboot bootloader (and press enter)

7) Now type the next command :

fastboot oem unlock (and press enter)

8) Reboot in normal mode
9) Be patient, when you unlock the bootloader, the phone reset to factory !
10) Now tap 7 times on Build number.
11) Then Developer options, and re-enable USB debugging.

STEPS TO FLASH THE TWRP 3.2.1

12) Copy the TWRP (recovery.img) into the folder  c:\adb\

13) Connect your phone to the PC via USB cable.
14) Open CMD (command prompt) in the c:\adb\ folder
To open CMD hold shift key and right click , then select "Open Command Window Here".

15) Now type the next command :

adb reboot bootloader (and press enter)

16) Now type the next command :

fastboot flash recovery recovery.img (and press enter)

IMPORTANT :


17) After that the flash process is finished :

LONG PRESS ONTO POWER BUTTON until the phone is turned off

18) Hold simultaneously volume up+power buttons
19) Select the first line with volume up button
20) Hold volume down button to confirm
21) Onto TWRP, swipe to allow modification.
22) Change the default language from Russian to your language.

VITAL STEPS :


23) Return to the main menù of TWRP.
24) Tap Install. Tap on Select Storage. Tap Micro SDCard. Tap OK.
25) Tap on SuperSU zip
26) Swipe to confirm Flash.
27) TAP ON DO NOT install - LOOK the next screenshot :

[Percy133]

Hi, i followed the tutorial to install twrp over nougat on my oukitel c5 pro and when i reboot my phone it says ' Orange state, your device has been unlocked and can't be trusted. Your device will boot in 5 seconds' but my phone is now blocked with the message. How i can fix this and reboot properly ? Cordially.

[GizBeat]

Hi, i followed the tutorial to install twrp over nougat on my oukitel c5 pro and when i reboot my phone it says ' Orange state, your device has been unlocked and can't be trusted. Your device will boot in 5 seconds' but my phone is now blocked with the message. How i can fix this and reboot properly ? Cordially.

Is it still booting into Android? To get rid of this message you'll need to re-lock the bootloader.

[Percy133]

Hi, yes i relock the c5 and then i reflashed the stock rom 20170414. I then installed twrp 3.1.1 and superSU and that works now ! But i've got an other issue,  i am trying to install the xposed framework without success. I installed the apk first and then i installed the zip v89 for sdk24. But when i reboot i'm stuck on oukitel logo. I also tried the other versions of the zip (88,88-1,88-2) but that's the same.  I don't understand what's going on. Could you help me, please ?