[ROM] Vernee Thor E MT6753 - TWRP and Stock Rom

[bppjenil]

Thank you very much for your great work on rom.
Now I'm on latest ROM . Can you you guide us how to put compass sensor file back to latest ROM from the first ROM?
Regards.

[PR0M1L]

I upload Stock Rom 2017_08_09 with SP Flash Tool v5.1724.00.000 all ok.
It updates the soft to the latest version, it is ok.
I upload twrp 3.0.3 and can not upload.
I load twrp 3.1, but it does not start up after exit.
I upload everything from the beginning, but this time without update and I can not load twrp 3.0.3, and after upload 3.1 the system does not start.
What am I doing wrong ?

[Cleopatra]

[PR0M1L]

Big THX Cleopatra..

point:
1is 100% correct.
2 is 100% cerrect.
After this point the system sees the sd card and formats it as internal memory (not as removable card).
3 - 9 is 100% correct.
After point 9 the system does not see the card shows the capacity of 0MB. I can not go to card and I can find the uploaded SU.zip file.
As I leave TWRP 3.1 (reebot, exit) the system does not pick up and I have to upload everything from point 1.
What am I doing wrong ?
Thank you very much in advance.

[kommando]

Big THX Cleopatra..

point:
1is 100% correct.
2 is 100% cerrect.
After this point the system sees the sd card and formats it as internal memory (not as removable card).
3 - 9 is 100% correct.
After point 9 the system does not see the card shows the capacity of 0MB. I can not go to card and I can find the uploaded SU.zip file.
As I leave TWRP 3.1 (reebot, exit) the system does not pick up and I have to upload everything from point 1.
What am I doing wrong ?
Thank you very much in advance.

When did you get your phone, just thinking if Vernee have changed something so in the same way you cannot put a M.A.D. rom onto a non E Thor built oct 2016 and after the Cleopatra TWRP does not load on a new version of the Thor E. Pure speculation, but as 3.1.0 did not work for me on a freshly delivered Thor E it cannot be ruled out.

Under Settings/about phone/Build number

alps-mp-n0.mp1-v1.0.2_nb6753.66n_P44 for me

alps-mp-n0.mp1-v1.0.2_nb6753.66n_P43 for Cleopatra

Could you post your build number

[Cleopatra]

Big THX Cleopatra..

point:
1is 100% correct.
2 is 100% cerrect.
After this point the system sees the sd card and formats it as internal memory (not as removable card).
3 - 9 is 100% correct.
After point 9 the system does not see the card shows the capacity of 0MB. I can not go to card and I can find the uploaded SU.zip file.
As I leave TWRP 3.1 (reebot, exit) the system does not pick up and I have to upload everything from point 1.
What am I doing wrong ?
Thank you very much in advance.

@PR0M1L :

Please DO NOT format the sd card as internal memory.
Keep the sd card as removable card.

FUNDAMENTAL :

Install SuperSU-v2.82 BEFORE to reboot in normal mode.

STEPS :

1) Unrar the SU_BU-June_2017.rar. Copy SuperSU zip onto your microSD.
2) Flash the TWRP 3.1
3) Enter onto twrp recovery (volume up + power buttons simultaneously).
4) Select the first white line and press volume down.
5) Change the Cyrillic alphabet onto your language.
6) Tap on Install, select Storage, select Micro SDCard, tap on OK.
7) Tap on SR1-SuperSU-v2.82-SR1-20170608224931.zip
8) Swipe to confirm Flash.
9) Tap on Reboot.
10) Tap on the icon of SuperSU to activate it.

[PR0M1L]

@Cleopatra,
ok, try the evening.

How to change SD card settings now to format it as removable memory?

Would later like to do root of the phone then I can format the card as internal memory, if so how to do?

Earlier I had root and card was seen as internal memory. so I would prefer.

ps. I have the build version of alps-mp-n0.mp1-v1.0.2_nb6753.66n_P44 and Your is as ... P43, it's not a problem?

[Cleopatra]

[PR0M1L]

Everything is clear, but it is a problem.
The SD card I have glued together with the second sim card chip so that the phone supports 2 sim cards and an SD card at the same time (it works fine). I can not format it outside the phone.
As I have a formatted SD card as an external memory, I can not upload anything to it.
As is the system card (internal) I upload using "My Phone Explorer client". I did this on an earlier version of your software and it worked right away.


EDIT

Ok everything works.
It was necessary to formulate the SD card as external memory.
Later, I downloaded the files from the cloud.

Thanks Cleopatra

ps. I would prefer an SD card as an internal memory because I record a lot on the recorder and I can not get past the track to record to an SD card.

[Cleopatra]

@PR0M1L :

You can use a file manager apk to transfer the content from internal to external sd.

Regards