[ROM] inew v3 official stock 1.0.5

[Jolly ZG]

Hello Guys

I got my inew phone last week but it was with version 1.0.1 on it so i decided to flash a newer ROM but unfortunately i hard bricked the phone completely ( the phone was dead ) until a few days ago that i flashed a Lewa 1.0.4 ROM and then the phone is alive again but i have the problem with the sim card ( i can't make any phone calls )

I have seen that you guys change the ROM quite fast and easy, after you change a ROM you can use the phone make calls and so on ?
should i update my phone to the v1.0.5 ROM to see if that fix my problem with the SIM card ?

Thanks for your help.

If you can not use phone calls to v 1.0.4, you have nothing to lose if you've installed v 1.0.5.
I think that the problem is not in ROM, perhaps in the procedure in the installation, setup network.Something happened when you first flash the phone.So you see that no one has a problem with calls and SIM card after flashing any ROM.Try bravely continued and you must do exactly as written in the tutorials for flashing.

[linr76]

the problem with the sim cards is most probably because you have lost your IMEIs
search the forum on how to enter your IMEIs back with Engineering mode.

[jpower73]

Hi guys,
I'm using 1.0.4 plus version and i'm thinking of trying this new one. Has anyone found any diference? What about ppower consumption?

[Jolly ZG]

"Lol, you're late, file sharing is canceled .."
chaos and confusion, and we now believe?
[Only registered and activated users can see links Click here to register]&err_type=share

[danyno1]

mediafire download link:
[Only registered and activated users can see links Click here to register]
special thx to Nunytes for uploading it on mediafire

---

IF YOU WANT NO TROUBLE ,PLEASE INSTALL 1.0.5 ROM INSTEAD OF 1.0.7 , THIS ONE IS STABLE AND HAS NO BUGS.

[joaoameixa]

I downloaded that ROM but i cant install it cause is missing CACHE and USERDATA -.-' how can i fix this?

[danyno1]

I don't understand what you are trying to say.
What cache and userdata are you talking about ?
You don't need anything else rather than Rom files + sp flahtools and win drivers.. That I've put download links for all of them.
Soooo?

[nunytes]

He is saying that the cache and user data are missing to check in sp flash tool (guessing it's impossible to do firmware update...)

[danyno1]

Which download link did you use? 4shared or mediafire?
IF THE ROM FILE IS UNPACKED WITH WINRAR, AND WINRAR UNPACKED IT WITHOUT ANY ERRORS, THEN IT MEANS YOUR DOWNLOADED FILE IS OK.
SO IT'S A PROBLEM WITH YOUR SP FLASHTOOL OR A NOT INSTALLED DRIVERS.
ARE YOU USING THE SP FLASHTOOL THAT IS MENTIONED IN THE 2ND PART OF THE STARTER POST?
HAVE YOU INSTALLED ALL THE DRIVERS??
YOU MUST SET SP FLASHTOOL ON FIRMWARE UPGRADE. HAVE YOU DONE THIS?
IN GENERAL ARE DOING 100% AS YOU SEE IN THE FIRST POST INSTRUCTIONS PICTURES??
IF YOU RECEIVE ANY ERRORS WHILE FLASHING, PLEASE TAKE A SCREENSHOT OF IT AND PUT IT HERE.
THX

[Andrew88]

I've the same problem. When i take to upgrade with flashtool 5.1343.01 this is the error:

"BROM ERROR: S_FTHND_FILE_IS_NOT_LOADED_YET (5007) There is file not loaded yet!! [HINT]:
1. Please check if the DA path is correct.
2. Please check if all the ROM files exist.
3. Please check if the scatter file description is sync with the exist ROM files."

How can i solve this? I've download 1.0.5 ROM from 4shared. This problem exists only when i try to upgrade to 1.0.5 ROM.