huawei y330: unlockbootloader and install cooked rom

[LOLMAN]

Hello everyone! I have a huawei Y330, with an awkward interface in my opinion, then I wanted to install some rom light, good battery and pleasant enough;) on the internet, however, on this smartphone, there is nothing about it, absolutely nothing (to what I tried myself)
well I was going to unlock the bootloader, but also on the 0: '(
then, .cmw and trpw (I think you write it, cmq that recovery) are not supported on this phone so do not know if I'll be able to flash: '(
then ask for help to some of you, if maybe someone who has managed to do the following things. thanks everyone: D

[Athos]

Hi, LOLMAN. Welcome to chinaphonearena!

Huwaei Y330 seems to be a MediaTek device. MTK Droid Tools should be able to give you substantial information on your phone. You can download that from here: [Only registered and activated users can see links Click here to register]
Just connect your phone to PC, install VCOM Drivers, and your phone should be recognized.

For CWM, you can build your own. I suggest you do this method [Only registered and activated users can see links Click here to register]

You will be making a complete ROM backup in the process. At the end, it will give you the option to create your own CWM.
When Droid Tools creates the patched recovery for your phone, you then use SP Flash tool to install it. Then you will have your CWM recovery.

If you have any questions during the process, just post it in the thread of the tutorial. There are many who are willing to help.

Good luck!

[LOLMAN]

thanks Athos, and sorry for the late answer!
now, where can i find the Vicom Driver?

[Athos]

Here you go [Only registered and activated users can see links Click here to register]

[Neumann]

i will unlock my Y330-u01
Huawei can't send me a code.. Theres no entry?! My phone is a repaired one...
Can i use dc-unlocker.. but i Need the correct Driver for win8
Can you help me?

[murshid]

How can i unlock the boot-loader, how to enter download mode on Y330-U01