Download D6000 ROM beta 5.1
[Only registered and activated users can see links Click here to register]
D6000 Driver and flash tool
[Only registered and activated users can see links Click here to register]
Fixed from previous beta
Have you tried this ROM yet?
Just adding some guide on how to do it.
1. Install the drivers. (Accept all default settings)
2. Install QPST/QFIL (Accept all default settings)
3. Unzip the tar.gz to a folder. (Remember this folder)
4. Run QFIL, it should auto detect the port (mine was COM5)
5. Select Flat build.
6. Select Programmer Path from the unzipped tar.gz folder just now and select prog_emmc_firehose_8936.mbn
7. Ensure the Select build path is the path to the unzipped tar.gz folder.
8. Click on Load XML and select rawprogram_unparse
9.. Select patch0.xml
10. Click on Download. Windows will suddenly find and install another new driver and you will receive a "Fail to find QDloader" error
After Windows has installed the driver, go to QFIL and select the new port number for the device Windows have just installed. You should see the number change from 9091 to 9008 and different COM number.
11. Press Download again and cross your fingers.
Hope it helps.