www.chinaphonearena.com

Hi,

first of all hello to the community, i hope somebody can help me with my problem!
i have a ht3 pro that was on official ROM V1.1.3. but this ROM is not downloadable on any site. As i wanted to install a custom ROM (KMDROID V1.0.6), i flashed die official ROM V.1.0.6. and me phone was initially bricked and the phone doesnt switch on any more.Stupid as i was, i didnt make any backup! Then i had some DRAM failures at SPFT but somehow i managed to flash official ROM V.1.1.2 but although it was successful at the SPFT it didnt boot either. Then i did another very stupid thing to flash the KMDROID 1.0.6. with the preloader of V1.1.2., and now i get this error: BROM Exception! ( BROM ERROR : S_STORAGE_NOT_MATCH (3182).

Right now i cant flash anything without this error. cant format auto or check EMMC in SPFT. So i guess i made to really brick my emmc/phone, maybe someone knows a cure.

My system is manjaro 16.06., SPFT 15.12, 1604, 1620 ..., i also deinstalled modemmanger (after that i was able to flash V.1.1.2), i also tried it on a windows system with the same 3182 error!

i cant format the phone, not even manual with hex code for preloader. Same Brom Error, Storage not match 3183. It seems that sp flash tool isnt recognising the phone at all, it always connects and disconnects every 2 seconds, it doesnt matter if battery is inserted after i clicked download, or without battery, tried some key combos, result stays the same.

Tried it on linux and win10 (mtk vcom drivers installed)

As i posted this problem in another forum, the moderator told me to ask someone to send me a backup for my phonel

i would really appreciate if someone would take the time to backup and send me his backup!

Possible solution to the problem

STEPS

1) Download & install ADB 1.4.2 at the next link :

[Only registered and activated users can see links Click here to register]

2) Download the next version of twrp :

[Only registered and activated users can see links Click here to register]

3) Unrar TWRP_3.0.2-.rar.
4) Go to C ... go to ADB folder ... open ADB folder.
5) Copy from the stock firmware boot.img
6) Paste it inside ADB folder.
7) Copy the recovery.img from TWRP_3.0.2-1 folder.
8) Paste it inside ADB folder.
9) Connect your phone to you rpc with usb cable.
10) Press volume up & power buttons simultaneously.
You will see 3 options (Recovery Mode/Fastboot Mode/Normal mode).
Use the volume up to move between the 3 options. Select Fastboot Mode.
11) Go inside ADB folder
12) Press SHIFT and right click to open a command prompt
13) To verify if your phone is recognized, type the next command :

fastboot devices (and press enter)

14) Type the next command :

fastboot flash boot boot.img (and press enter)

15) Type the next command :

fastboot flash recovery recovery.img (and press enter)

16) Remove the battery & put the battery back in.
17) Press volume up & power buttons simultaneously.
You will see 3 options (Recovery Mode/Fastboot Mode/Normal mode).
Use the volume up and volume down to confirm the Recovery Mode.
18) You should see the TWRP recovery main screen.
19) Install a custom rom zip. Please see on Needrom For further details.

Good luck

Unfortunately my phone doesnt boot at all, button-combos dont work either...

maybe this could help if someone sends me his backup(v1.1.3) following this tutorial:

(2016-07-05, 19:44)emmes Wrote: [ -> ]Unfortunately my phone doesnt boot at all, button-combos dont work either...

maybe this could help if someone sends me his backup(v1.1.3) following this tutorial:

Probably we do not understand each other.
How do you plan to restore a backup if your pc (both Windows OS & Linux OS) doesn't recognize your phone ?
How do you plan to restore a backup if your phone doesn't boot in Fastboot mode ?

same issue here , my phone HOMTOM HT3 keeps diconnecting from Win7 PC

i hope that i can flash the preloader with this scatter file that was made with that backup

@fatkun

Please explain me better your problem.
What you did to damage your phone ?

(2016-07-05, 19:44)emmes Wrote: [ -> ]Unfortunately my phone doesnt boot at all, button-combos dont work either...

maybe this could help if someone sends me his backup(v1.1.3) following this tutorial:

It is good. If you device full brick. This mean you finaly destroy GPT(GUID Partiton Table, EFI) and your device as before the FIRST SW download "at factory"(empty flash) BUT it must be define in PC DEV. MANAG. with pressing-holding some button(Vol + ; in my ht6, Win7x64) as MTK USB Port. We can't kill this never !
This brom com port , bootstrap "hartcoded" in SoC !
I have some troubles with Flash Tool SW download( and 16-year version also) and use Customer Download Tool SP_MDT_exe_v3.1620.00.00 (16-year)
Before generate file Checksum.ini - put CheckSum_Generate.exe in SW folder and run. In SP_MDT first press "Scan" and connect with THIS BUTTON holding it define number VCOM and BROM ports on this PC USB socket. IF OK disconnect phone, press "Start All" and connect with THIS BUTTON . After this my ht6 was flashed without any problem
You can find SW ht3 pro on Russian another forum and mainlly yours TWRP backup
Sorry for my pure English: I'm reader - not writer. Good luck !

I tried the hardware unbrick method via meta mode but which pins i have to connect? there is no GND and just a KPCOL0?

(2016-07-06, 16:52)emmes Wrote: [ -> ]I tried the hardware unbrick method via meta mode but which pins i have to connect? there is no GND and just a KPCOL0?

There is no such unbrick method via META mode ! META = Mobile Engineering Testing Architecture for alive phones. And for what testpoint KCOL0( Keypad COlumn Line 0 ?? tp KCOL0 to gnd the same MTK USB Port in Device Manager.
For any unbricking actions you don't need disassemble phone !