(2017-05-23, 08:03)kruegerfreddy Wrote: [ -> ]Dear @motordig excuse me my english very bad
my old problem sd card not working and gps working but not signal .
i am flashed proinfo.bin and lk.bin with your orginal fix files .. screen not work.
i am reflash only proinfo.bin with your orginal fix and all k107 files
.. now screen working sd card and working gps low signal .
now my problem only gps low signal . 
which file will be edited for Low signal GPS . or me need driver for gps low signal
thx all .
My GPS works well. Verify the operation of GPS is necessary to spend outdoors ( not in the apartment). Or testing using MTK ingenering mode.
No problem. No edit or no fix proinfo.bin.
Only i am reflashed together k170 and your proinfo.bin
gps and sd card working right
My head is quite confused. HexEditor I know as pictured.
Thanks all !!!
Hi Guys!
I need help. I have a bricked BMXC K107 (16Gb version, i've checked the NAND chip under the cover). I had read this topic over and over, but no solution...
This board is a K107MB 5.0. I've downloaded this ROM: vKB076N that listed above.
Every scatter file in it isn't working for my tablet, when i use BeeTools.
When i connect the tablet it says "S_STORAGE NOT MATCH (Error code 3183)" See attached picture.
So the flash process started, but, problem occured, maybe with the NAND storage size?
What should i do now?
(2017-06-21, 02:34)PAtr0n Wrote: [ -> ]Hi Guys!
I need help. I have a bricked BMXC K107 (16Gb version, i've checked the NAND chip under the cover). I had read this topic over and over, but no solution...
This board is a K107MB 5.0. I've downloaded this ROM: vKB076N that listed above.
Every scatter file in it isn't working for my tablet, when i use BeeTools.
When i connect the tablet it says "S_STORAGE NOT MATCH (Error code 3183)" See attached picture.
So the flash process started, but, problem occured, maybe with the NAND storage size?
What should i do now?
Anybody????? Please help guys!
The firmware for the K107 v4.1 link isn't working anymore? Where can I get a working firmware for it please! The tablet has the mtk8321a on board with 1gb ram and 16b rom. The usual set up.
same situation as you guys,my tab died while recharging,didn't even had tried to install any dumb apps on it...i wander if isn't a memory issue after all..like a broken hard drive
Доброго времени суток. У меня планшет BRAND: BMXC
Материнская плата:
Sim2
K107-MB-V3.0
2015-9-30
K960AC-V3.0
PD:4+B1
160306
K107ACV3.0_vKBZ004_SMT_K960
K107AC-V3.0 BLDA7
B20160217_1G16G
После падения и замены LCD display (BP096WX1-100) на новый экран черный. Пробовал прошивки - экран реагирует на кнопку пуск и идет подсветка, но экран черный и система не запускается. Прошу помощь в нахождении прошивки для этой ревизии планшета. Заранее благодарен.
Good day. I have a BRAND tablet: BMXC
Motherboard:
Sim2
K107-MB-V3.0
2015-9-30
K960AC-V3.0
PD:4+B1
160306
K107ACV3.0_vKBZ004_SMT_K960
K107AC-V3.0 BLDA7
B20160217_1G16G
After dropping and replacing the LCD display (BP096WX1-100) on the new screen is black. Tried the firmware - the screen responds to the start button and goes backlighting, but the screen is black and the system does not start. I ask for help in finding the firmware for this revision of the tablet. Thanks in advance.
K960_vKBZ005_SMT_C3_L4
K107BC-В6.0 BLDA7 B20170221_1G16G. есть вот такая прошивка?
(2018-01-27, 11:07)sivhik Wrote: [ -> ]K960_vKBZ005_SMT_C3_L4
K107BC-В6.0 BLDA7 B20170221_1G16G. есть вот такая прошивка?
Спасибо за сообщение. Я еще не использовал эту прошивку. Я постараюсь найти и применить.
