Dear pop popper Hello .I have the same problem with the Chinese tablet BMX want to download your firmware to try to revive your tablet. but the firmware will not open help to download.THANKS link
[Only registered and activated users can see links Click here to register] is no longer working help download
Can someone post the rom for KB0004C? cant find it, my brain its going to explode
Hello, I have a problem with the lk.bin of my tablet kt107 after putting the system for a problem of brickeo my tablet turns on with a black screen and after a while it turns white I would like to see that person has these same specifications to share with me your full backup with the mt6580 scatter file would appreciate it with the soul
(2019-10-29, 14:23)ApplexS Wrote: [ -> ]Hello, I have a problem with the lk.bin of my tablet kt107 after putting the system for a problem of brickeo my tablet turns on with a black screen and after a while it turns white I would like to see that person has these same specifications to share with me your full backup with the mt6580 scatter file would appreciate it with the soul
KT107_D2_1+16_31PIN_20181222
KT961C12_80_216_V3.0
KT107C12_80_216_V3.0_1G_16G_RDA _GSM
(2019-02-05, 20:35)BrOtHeR Wrote: [Only registered and activated users can see links Click here to register] I had to edit the file proinfo.ini , but it doesn't take very long.
Great thanks!
What needs editing in the proinfo.ini? Not sure what you meant here?
Thanks
[/quote]
is it possible to get the link work again ????
[/quote]
HOW EXACTLY DID YOU EDIT THE PROINFO.BIN? I AM HAVING THE SAME PROBLEM
Versão em Português.
Eu possuo o mesmo tablet a mesma placa, processador e lcd. Suas dicas me ajudaram muito. O meu está com o problema do LCD as luzes estão acesas e a tela preta. Consegui instalar um custom com android 5.1 porém foi mudado as configurações de memória e nand(armazenamento).
Se você tiver uma tela preta, mas as luzes estiverem acesas, na parte traseira do tablet, é o componente do LCD da ROM. Isso pode ser alterado e é um pouco mais complicado de explicar em um post; então, esperarei até que você conclua o acima / abaixo e volte para mim antes de explicar a alteração dos componentes do LCD.
Recebi uma cópia do vendedor do aliexpress e ao instalar o as luzes atras no led ficam acesas e a tela preta. Se eu mudo o terceiro componente do hardware de 4d0 para 370, a tela funciona mais aparece o "boot error!!!!!!", se eu deixo em 4d0 não sei o que acontece pois somente as luzes na parte de tras ficam acesas, eu não sei se está tendo algum erro de boot.
Por favor me oriente como resolver o problema do LCD ou Boot Error!!!
Versão translate
I have the same tablet, the same board, processor and lcd. Your tips helped me a lot. Mine has the LCD problem, the lights are on and the screen is black. I managed to install a custom with android 5.1 but the memory and nand (storage) settings were changed.
If you have a black screen, but the lights are on, on the back of the tablet, it is the LCD component of the ROM. This can be changed and is a little more complicated to explain in a post; so i will wait until you complete the above / below and come back to me before explaining the change of the LCD components.
I received a copy from the seller of aliexpress and when installing the lights behind the led are on and the screen is black. If I change the third hardware component from 4d0 to 370, the screen works more like "boot error !!!!!!", if I leave it at 4d0 I don't know what happens because only the lights on the back are on , I don't know if you are having a boot error.
Please advise me how to solve the LCD problem or Boot Error !!!
(2019-10-29, 14:25)ApplexS Wrote: [ -> ]KT107_D2_1+16_31PIN_20181222
KT961C12_80_216_V3.0
KT107C12_80_216_V3.0_1G_16G_RDA _GSM
Has anyone found this ROM/Firmware? If so, where could I obtain it?
(2019-04-09, 19:43)motordig Wrote: [Only registered and activated users can see links Click here to register]
could you re-upload please ?
Please a firmware update for BMXC-K107-EEA, please!!!
Or a custom rom very new.
Please.