Hi please i want to root my f7 doogee help please thanks!!
KingoRoot APK well root it
(2017-05-16, 00:52)flight Wrote: [ -> ]KingoRoot APK well root it
No root with kingo root you know you have any idea?
(2017-05-18, 18:00)Cleopatra Wrote: [Only registered and activated users can see links Click here to register]
2) Download the SuperSU.zip and Busybox.zip :
[Only registered and activated users can see links Click here to register]
3) Unrar 2017_SU-BU
4) Copy the two zip inside your microSD
5) Download the next version of SP Flash Tool :
[Only registered and activated users can see links Click here to register]
6) Flash the twrp with SP Flash Tool
7) See what happens
8) If it works well, install SuperSU.zip before to reboot
9) If it will does NOT work, flash the stock recovery inside the rar
Regards
Thank you very very match cleopatra thsnk you...
@Vlepes :
Do not forget to tell me if it works or not
(2017-05-20, 04:56)Cleopatra Wrote: [ -> ]@Vlepes :
Do not forget to tell me if it works or not
Cleopatra hi i am very ?? not working why? oufff!!!
(2017-05-21, 17:42)Cleopatra Wrote: [Only registered and activated users can see links Click here to register]
3) Tap on Settings --> About phone --> Tap Build number seven times.
Developer options --> OEM unlocking enabled and USB debugging enabled.
4) Download SuperSU.zip and BusyBox.zip at the next link :
[Only registered and activated users can see links Click here to register]
5) Unrar 2017_SU-BU.rar. Copy the 2 zips onto your microSD.
STEPS TO DO ONCE ONLY :
6) Plug your phone to PC via USB cable.
Allow the pop up request on your phone to give your PC USB debugging.
7) Open CMD (command prompt).
8) Type the next command :
adb reboot bootloader (and press enter)
9) Now type the next command :
fastboot oem unlock (and press enter)
10) Press volume up (into your phone) to confirm to unlock the bootloader.
You will see in the CMD prompt the next messages :
"Start unlock flow", and when it will be finished, you will see "OKAY".
11) Reboot in normal mode (be patient, when you unlock the bootloader, the phone reset to factory).
12) Now tap 7 times on Build number.
Then Developer options, and re-enable OEM unlocking and USB debugging.
STEPS TO DO EVERY TIME YOU NEED TWRP RECOVERY :
13) Copy the TWRP (recovery.img) into the same folder of fastboot.exe and adb.exe ( c:\adb\ ).
14) Connect your phone to the PC via USB cable.
15) Open CMD (command prompt) and type the next command :
adb reboot bootloader (and press enter)
16) Now type the next command :
fastboot boot c:\adb\recovery.img (and press enter)
17) Swipe to allow modification of System.
18) Now - the most important thing - tap on Backup.
19) Check mark on Nvram, Boot, System and Data.
20) Tap on Select Storage, tap on MicroSDCard, tap on OK.
21) Tap Swipe to Backup.
22) Return to the main menù of TWRP.
VITAL STEPS :
23) Tap Install. Tap on Select Storage. Tap Micro SDCard. Tap OK.
24) Tap on SuperSU zip
25) Swipe to confirm Flash.
26) Tap on Reboot.
27) Tap on the icon of SuperSU to activate it.
WARNING :
Every time that you are onto TWRP recovery,
DO NOT disconnect the phone from pc.
Regards
yes yes!!! thank you very much cleopatra all ts fine thank you again you are fainomenoo
Regards
(2017-05-21, 17:42)Cleopatra Wrote: [Only registered and activated users can see links Click here to register]
3) Tap on Settings --> About phone --> Tap Build number seven times.
Developer options --> OEM unlocking enabled and USB debugging enabled.
4) Download SuperSU.zip and BusyBox.zip at the next link :
[Only registered and activated users can see links Click here to register]
5) Unrar 2017_SU-BU.rar. Copy the 2 zips onto your microSD.
STEPS TO DO ONCE ONLY :
6) Plug your phone to PC via USB cable.
Allow the pop up request on your phone to give your PC USB debugging.
7) Open CMD (command prompt).
8) Type the next command :
adb reboot bootloader (and press enter)
9) Now type the next command :
fastboot oem unlock (and press enter)
10) Press volume up (into your phone) to confirm to unlock the bootloader.
You will see in the CMD prompt the next messages :
"Start unlock flow", and when it will be finished, you will see "OKAY".
11) Reboot in normal mode (be patient, when you unlock the bootloader, the phone reset to factory).
12) Now tap 7 times on Build number.
Then Developer options, and re-enable OEM unlocking and USB debugging.
STEPS TO DO EVERY TIME YOU NEED TWRP RECOVERY :
13) Copy the TWRP (recovery.img) into the same folder of fastboot.exe and adb.exe ( c:\adb\ ).
14) Connect your phone to the PC via USB cable.
15) Open CMD (command prompt) and type the next command :
adb reboot bootloader (and press enter)
16) Now type the next command :
fastboot boot c:\adb\recovery.img (and press enter)
17) Swipe to allow modification of System.
18) Now - the most important thing - tap on Backup.
19) Check mark on Nvram, Boot, System and Data.
20) Tap on Select Storage, tap on MicroSDCard, tap on OK.
21) Tap Swipe to Backup.
22) Return to the main menù of TWRP.
VITAL STEPS :
23) Tap Install. Tap on Select Storage. Tap Micro SDCard. Tap OK.
24) Tap on SuperSU zip
25) Swipe to confirm Flash.
26) Tap on Reboot.
27) Tap on the icon of SuperSU to activate it.
WARNING :
Every time that you are onto TWRP recovery,
DO NOT disconnect the phone from pc.
Regards
Wow! Thanks a lot!! I thought this phone was unrootable! Thanks a lot for your help!!
