www.chinaphonearena.com

Full Version: Cube iPlay 10. U83. MT8163
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
Pages: 1 2
Hi,

Would anyone point me in the right direction with regards to obtaining a copy of the stock firmware please? I just can't seem to find one at all.
Alternatively, some idea as to how i can pull the boot.img from this tablet would be greatly appreciated.

Cheers
Hi,

I own this tablet and was able to download the stock firmware from a Chinese forum. Having a backup, I unlocked the bootloader and flashed a rooted rom (also obtained from that site). I'm not sure if the original links are still available, so here's a mirror link: [Only registered and activated users can see links Click here to register]

You'll find all the necessary tools and files (including boot.img) inside the rar, but the instructions are in Chinese. Let me know if you need help translating them. Big Grin
Hi MMWolverine, many thanks for this stuff! I looked so hard for it, because I need to reinstall the stock rom on my Cube iPlay 10 (booting takes minutes and then I always get "app persmission management is running" and "system process not responding", even after factory reset.) Are you kidding or are you really able and willing to translate this Chinese stuff? This would be so great! Many thanks in advance!
Cheers
(2017-11-04, 09:09)MMWolverine Wrote: [Only registered and activated users can see links Click here to register]

You'll find all the necessary tools and files (including boot.img) inside the rar, but the instructions are in Chinese. Let me know if you need help translating them. Big Grin


Thank you very much for providing this!

I was able to successfully install it using SP Flash Tool. However you need to ensure you rename the Chinese folders to English or else the Scatter File wont load properly.

Unfortunately this rom still has the three Adups Fota viruses. No worries though. I managed to get rid of them by following this tutorial in order to root the device: .

Then I installed a 'System App Remover' from the playstore and that managed to remove them perfectly (Titanium backup did not do a good job.) 

Malware Bytes shows the tablet is now clean!
Hello,

Are any of you having TWRP for this tablet to share?

I know it exists but can not download it on another forum

thank you in advance.
(2018-06-04, 18:11)rakam Wrote: [ -> ]Hello,

Are any of you having TWRP for this tablet to share?

I know it exists but can not download it on another forum

thank you in advance.

Hello Rakam, give me a direct link to the post with the TWRP on another forum and I'll get it for you.
(2018-06-04, 22:50)GizBeat Wrote: [ -> ]Hello Rakam, give me a direct link to the post with the TWRP on another forum and I'll get it for you.

Thank you, very nice of you :

another forum

no idea if the link is dead ?

original post :

another forum

if ever the link is dead, you may request a re-post

it would be really nice of you

good night.
Here it is: [Only registered and activated users can see links Click here to register]
(2018-06-05, 03:14)GizBeat Wrote: [Only registered and activated users can see links Click here to register]

Very nice, thank you so much Big Grin
Hi,
I have a chinese tablet with same configuration , except it has 1 GB RAM , 
I need to use swap memory for increasing ram , without that this tablet is useless. Please help me rooting this tablet, I can not find twrp and custom ROM either. 

following are it's specs

Model NS P10A8100
manufacturer : Insignia
Board : NS P10A8100
Hardware : mt8163
processor architecture : 4x ARM Cortex A53 @1.30Ghz
android version 7.0
api level 24
kernel architecture armv8L or armv8i
kernel version 3.18.35
Root : NO

Device
Manufacturer Insignia
Model ID NS-P10A8100
Android Version 7.0
Kernel Version 3.18.35
Battery Capacity 5000 mAh
SoC (Processor)
Architecture ARM (armv8l)
SoC Model ARM Cortex-A53
SoC Family 4x ARM Cortex-A53 @1.30 GHz
Frequency 1300 MHz / Min: 600 MHz - Max: 1300 MHz
Main CPU Cores 4 Cores / 4 Threads
CPUID 41.0.8.D03.3
Revision R0P3
Features HALF THUMB FASTMULT VFP EDSP NEON VFPV3 TLS VFPV4 IDIVA IDIVT LPAE EVTSTRM AES PMULL SHA1 SHA2 CRC32
Bogomips 26.00 MIPS
Display (GPU / LCD)
SoC Manufacturer ARM
SoC Model Mali-T720
OpenGL Ver. 3.1
LCD Size 9.4 inches / 23.9 cm
LCD Resolution 800 x 1280 pixels
LCD Definition 160 DPI
Memory
RAM 947 MB (1 GB)
Flash 23769 MB
Embedded Sensor
Sensor #1 ACCELEROMETER
Pages: 1 2