www.chinaphonearena.com

Full Version: Fix IMEI and NVRAM to bluboo Dual
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
Help needed

Tried most available tools but failed to rectify the problem.
(SN Writer, MauiMeta and a few more)

Please support me in this
(2018-04-05, 09:46)BZonta Wrote: [ -> ]Help needed

Tried most available tools but failed to rectify the problem.
(SN Writer, MauiMeta and a few more)

Please support me in this

Hello.

Please try the next solution.

ROOT REQUIRED !

STEPS :

1) Download/install "Terminal emulator for Android" by Jack Palevich.

2) Tap on "Terminal emulator for Android" apk.

3) Type su (and tap Enter).

4) Type the next command :

echo 'AT +EGMR=1,7, "IMEI_1" ' >/dev/radio/pttycmd1 (and tap Enter)

NOTE : replace IMEI_1 with your first IMEI

5) Type the next command :

echo 'AT +EGMR=1,10, "IMEI_2" ' >/dev/radio/pttycmd1 (and tap Enter)


NOTE : replace IMEI_2 with your second IMEI

6) Reboot the phone.
TQ
Will try when I get home
will report here.
For whatever circumstances
i had tried...............
post to rebooting..............the carrier name was flashed at top left coner
BUT imei number NONE registered.


Could you please hilite to me where should I put space in the command line.
(2018-04-07, 08:18)BZonta Wrote: [Only registered and activated users can see links Click here to register]
Thanking you so much............... Smile Smile Smile

got it right with your help. tq again.


Tried both imei 1 and 2...........only registered imei 2
then i put imei 1 alone ....works like a charm.
that chamelepon....harmed me than good