www.chinaphonearena.com

Hi.

I successfully port TWRP for D6000 with android 6.0.1 ver 3.2
TWRP ported from oppo twrp.

Twrp works good



Download:
[Only registered and activated users can see links Click here to register]

How to install:

1. download and extract archive
2. turn off device
3. press vol - and connect device with USB cablet to PC
now you have device in fastboot mode
Info: if you dont have unlocked bootloader, you must unlock bootloader (fastboot oem unlock-go)
5. run bat file run_me.bat
6. after flash and reboot quickly pres vol+ to enter recovery
7. now you have twrp and you can flash magisk or supersu

note: if you flash magisk 16, first start is longer 3 - 6 min

good job

Hi,
the link is broken. Is the file still available somewhere?

Hi,

I have uploaded here:
[Only registered and activated users can see links Click here to register]


The download key is:
UzUkAMp6ixAVI2zjCG8-QE5oH-qhYuv5KKmO-ryFaGE

In linux, you can install as follow:
1. copy archive, extract fo your desire path and cd /"....your path to extracted folder"; eventually, open terminal into that folder

2. adb device
this is to check if the phon is connected to the cable, if not exist adb please install it with # sudo apt-get install adb

3. adb reboot bootloader
this is just to let you reboot and enter in bootloader mode (the android splash screen)

4. fastboot flash recovery twrp-3.0.2.img
check if you see on terminal:
target reported max download size of 268435456 bytes
sending 'recovery' (12726 KB)...
OKAY [  0.402s]
writing 'recovery'...
OKAY [  0.200s]
finished. total time: 0.603s

5. reboot phonewith power button. To enter in TWRP mode press vol+ on reboot.

Thank you very much sir.