www.chinaphonearena.com

Nope, incase Sp flash tool won't work in my device, this is my 2nd option. Anyways, thanks...

(2014-02-15, 09:31)Skot78 Wrote: [Only registered and activated users can see links Click here to register]

It's a little bit separated...maybe help.

Hi,

How about the iNEW v3? Do you know where the service spot is?

Hi
My phone is the iNew v3 and it is hardbricked. I want to use the method above but i need help of knowing where the spot on the motherboard is. Attached is a pic of the motherboard. Reply would be much appreciated.

(2014-02-12, 20:39)Skot78 Wrote: [ -> ]I think for MTK based phones you not need any specific "magic" hardware.

Every mtk based phone's motherboard there is a "service spot".
(just need to recognise it)

If the phone hardbircked...The PC cant recognise, no charge, no anything...Just plug on USB to PC, short the "service spot", and the PC will recoginse and you can flash rom with SPFlashTools.

I did it many times on my Inew i2000

Hello, can you tell me how did you do that? I tried to reflash my I2000 with an older rom, it's stock rom has Android 4.2.2, and I didn't find it, so I tried to put an older rom. After tens and tens of attempts, I succeeded to flash it until green circle appeared, usually it stopped at red line. then when I turned it on it was completely dead, it bearely appear in device manager as Com port 20 without battery and MTK and something with battery. I even tried with service spot but no success. It stais at the red line or sometimes it gives all sort of errors. Can you help me please? Do you have the stock rom with android 4.2.2? Do you have a picture with the service spot to check if it is the same I know? I lost a few days trying all sort of methods.
Thank you.

[quote=

There is the Inew I2000 service spot...

[Only registered and activated users can see links Click here to register]

It's a little bit separated...maybe help.
[/quote]


Now I've seen your picture, yes this picture I've used too and I used that spot, but no success. Any other ideas?
Thank you.

I have not tried it but you will find a thread somewhere by googling, click on the first in the list after searching for
android test point

that thread will show you can also try the battery terminal if you can't find the test point
allegedly the battery negative connection on your phone.

naturally you have battery removed
YMMV

(2014-02-12, 20:39)Skot78 Wrote: [ -> ]I think for MTK based phones you not need any specific "magic" hardware.

Every mtk based phone's motherboard there is a "service spot".
(just need to recognise it)

If the phone hardbircked...The PC cant recognise, no charge, no anything...Just plug on USB to PC, short the "service spot", and the PC will recoginse and you can flash rom with SPFlashTools.

I did it many times on my Inew i2000

hi there i would apriciate if you can help me with my n9776 star it its hard bricked cant charge cant turn on nothing i try everything but cant fix it if you have any experience with this pls help thank you my email is [email protected]

Hello. Is here anyone who knows if a service spot for JIAYU G4s exists?

Hello. Has anyone found out where is a test point in Inew V3!