www.chinaphonearena.com

I do really need stock rom of HYD T906

Could anyone please give me link for STOCK ROM ?t,
thanks in advance for your help

Detail of my tablet  
============

Brand  HYD T906
[Only registered and activated users can see links Click here to register]

I need firmware download for China Tablet Model ROAI-100-TPC-2019

Manufacturer- KTY
Chip ID - MT6753v
Board ID - KT960A12_35_168_V1.1

(2019-08-31, 21:11)maxfusionx3 Wrote: [ -> ]I need firmware download for China Tablet Model ROAI-100-TPC-2019

Manufacturer- KTY
Chip ID -        MT6753v
Board ID -       KT960A12_35_168_V1.1

You may add a new post to widely seen, and I never see KTY but KTC , JTY, and KTE

(2019-08-31, 05:15)Dhamma Bodhisuttha Wrote: [Only registered and activated users can see links Click here to register]

same here.....need stock rom or preloader. 

There is one links here below you may try if it success or not

===========================

Hardware : MT6582
Model : T906
Build number : T906_vEN0B81_20181121
Build date UTC : 20181121-092125
Android v : 6.0 - (This is fake, it is v4.4.2)
Baseband v: MOLY.WR8.W1315.MD.WG.MP.V34, 2018/01/02 14:24
Kernel v : 3.4.67 (buildserver@buildserver10) (gcc version 4.7 (GCC) ) #1 SMP Wed Nov 21 17:19:15 CST 2018
[Only registered and activated users can see links Click here to register]

the links for all files is here
[Only registered and activated users can see links Click here to register]

(2019-08-31, 23:01)Dhamma Bodhisuttha Wrote: [ -> ]You may add a new post to widely seen, and I never see KTY but KTC , JTY, and KTE

It is JTY....very sorry for the mistake.

(2019-08-31, 23:01)Dhamma Bodhisuttha Wrote: [ -> ]You may add a new post to widely seen, and I never see KTY but KTC , JTY, and KTE

It is JTY......very sorry for the typo!

I am searching for a ROM - device specified itself as HYD T906.

As everything else is faked, I'm not quite sure if this is actually true.

I managed to create a crash after bootup - unfortunately, USB debugging isn't turned on as I tried to factory reset via recovery. It failed, though. After that, I tried to flash the ROM from above mentioned XDA link. It resulted in me getting a black screen after I turn it on. But I can flash all kinds of ROMs, though.

Model-Number: T906
Software Version: KT107H_20190601
Kernel: 3.4.67 (azuho@azuho-desktop) (gcc version 4.7 (GCC) ) #2 SPM PREEMT Fri Jul 19
20:09:22 CST 2019

Baseband-Number: MOLY.WR8.W13.15.MD.WG.MP.V62

It contains a sticker on the processor casing: KT106G_D3 1+16 3PIN - 2017127
and
KT106G-82-270-V1.0-1GB 16GB-6582


Motherboard number: KT096G_82_270_V1.0
with a tiny number under it: 20170505




Is there anyone who can direct me to a ROM that might work? Due to me flashing the wrong ROM, I'd need a preloader with it.
Any information if this actually might be no HYD T906 at all?

Many thanks in advance for help.

Hi Loewe78

I  have exactly same model as yours
Software version KT107H_20190601
I also have the same mainboard and software version too.
Mainboard version KT106G-D3-1+16-31PIN-20171207
KT096G_82_270_V1.0
I've upgraded the tablet but something went wrong, so i lost T906.
There might be someone who use this tablet can upload file preloader.bin for us, this would be appreciated.
I also lost my scatter.txt  file, only a pic from screen capture but I'm not sure it's the correct one.

I also got a blank screen from above rom, and I just know lator because I overwrite file preloader.bin without backup, so sad.
 
I have a screen capture of my scatter file but don't know how to insert the pic as above