2020-01-04, 07:12
Buonasera,
provando a riaccendere il tablet ho notato che resta fermo sulla scritta android e non va avanti...non si schioda
Ho provato a fare una factory reset con i tasti power e freccia + ma mi dice che non trova i dati
Ho provato a collegarlo al PC con windows7 ma non viene visto (crudo solo con cavo USB)
Ho provato ad accenderlo con tasto power e freccia - e mi escono scritte in cinese (che non conosco), a questo punto armeggiando in mezzo ai comandi, dopo aver provato varie combinazioni, ha fatto un test della memoria e mi dice che non trova alcuni file allocati (in inglese). Inoltre ho trovato la schermata delle info del tablet che vado ad elencare:
BB Chip: mt6580
MS Board. : K107
Build Time: Wed Nov 29 12:18:54 CST 2017
Kernel Ver. : 3.18.35+ (buildserver@buildserver3) (gcc version 4.8 (GCC) ) #1 SMPPREEEMPTWed Nov 29 12.46:20 CST 2017
Android Ver. : 7.0
SW Ver. alps-mp.n0.mp2-V1_jlink6580.we.cd.n
Custom Build Verno. : vKA00000A
IMEI1 :xxxxxx
IMEI2:xxxxxx
Modem Ver. : MOLY.WR8.W1449.MD.WG.MP.V91.5 2017/03/30 18:23
Bar code: xxxxxx
ho omesso volontariamente dei dati che ritengo riservati, ma se servono posso metterli tranquillamente
A questo punto chiedo: c'è un sistema per ripristinarlo e renderlo di nuovo funzionante oppure lo devo buttare?
Good evening,
trying to turn the tablet back on, I noticed that it stays still on the word android and it doesn't go on ... it doesn't stop
I tried to do a factory reset with the power and arrow + keys but it tells me that it cannot find the data
I tried to connect it to the PC with windows7 but it is not seen (raw only with USB cable)
I tried to turn it on with the power button and arrow - and I get written in Chinese (which I don't know), at this point fumbling in the middle of the commands, after trying various combinations, he did a memory test and he tells me that he doesn't find some allocated files (in English). Also I found the info screen of the tablet that I am going to list:
BB Chip: mt6580
MS Board. : K107
Build Time: Wed Nov 29 12:18:54 CST 2017
Kernel Ver.: 3.18.35+ (buildserver @ buildserver3) (gcc version 4.8 (GCC)) # 1 SMPPREEEMPTWed Nov 29 12.46: 20 CST 2017
Android Ver.: 7.0
SW Ver.alps-mp.n0.mp2-V1_jlink6580.we.cd.n
Custom Build Verno. : vKA00000A
IMEI1: xxxxxx
IMEI2: xxxxxx
Modem Ver.: MOLY.WR8.W1449.MD.WG.MP.V91.5 2017/03/30 18:23
Bar code: xxxxxx
I have voluntarily omitted data that I consider confidential, but if needed I can safely put it
At this point I ask: is there a system to restore it and make it functional again or do I have to throw it away?
provando a riaccendere il tablet ho notato che resta fermo sulla scritta android e non va avanti...non si schioda
Ho provato a fare una factory reset con i tasti power e freccia + ma mi dice che non trova i dati
Ho provato a collegarlo al PC con windows7 ma non viene visto (crudo solo con cavo USB)
Ho provato ad accenderlo con tasto power e freccia - e mi escono scritte in cinese (che non conosco), a questo punto armeggiando in mezzo ai comandi, dopo aver provato varie combinazioni, ha fatto un test della memoria e mi dice che non trova alcuni file allocati (in inglese). Inoltre ho trovato la schermata delle info del tablet che vado ad elencare:
BB Chip: mt6580
MS Board. : K107
Build Time: Wed Nov 29 12:18:54 CST 2017
Kernel Ver. : 3.18.35+ (buildserver@buildserver3) (gcc version 4.8 (GCC) ) #1 SMPPREEEMPTWed Nov 29 12.46:20 CST 2017
Android Ver. : 7.0
SW Ver. alps-mp.n0.mp2-V1_jlink6580.we.cd.n
Custom Build Verno. : vKA00000A
IMEI1 :xxxxxx
IMEI2:xxxxxx
Modem Ver. : MOLY.WR8.W1449.MD.WG.MP.V91.5 2017/03/30 18:23
Bar code: xxxxxx
ho omesso volontariamente dei dati che ritengo riservati, ma se servono posso metterli tranquillamente
A questo punto chiedo: c'è un sistema per ripristinarlo e renderlo di nuovo funzionante oppure lo devo buttare?
Good evening,
trying to turn the tablet back on, I noticed that it stays still on the word android and it doesn't go on ... it doesn't stop
I tried to do a factory reset with the power and arrow + keys but it tells me that it cannot find the data
I tried to connect it to the PC with windows7 but it is not seen (raw only with USB cable)
I tried to turn it on with the power button and arrow - and I get written in Chinese (which I don't know), at this point fumbling in the middle of the commands, after trying various combinations, he did a memory test and he tells me that he doesn't find some allocated files (in English). Also I found the info screen of the tablet that I am going to list:
BB Chip: mt6580
MS Board. : K107
Build Time: Wed Nov 29 12:18:54 CST 2017
Kernel Ver.: 3.18.35+ (buildserver @ buildserver3) (gcc version 4.8 (GCC)) # 1 SMPPREEEMPTWed Nov 29 12.46: 20 CST 2017
Android Ver.: 7.0
SW Ver.alps-mp.n0.mp2-V1_jlink6580.we.cd.n
Custom Build Verno. : vKA00000A
IMEI1: xxxxxx
IMEI2: xxxxxx
Modem Ver.: MOLY.WR8.W1449.MD.WG.MP.V91.5 2017/03/30 18:23
Bar code: xxxxxx
I have voluntarily omitted data that I consider confidential, but if needed I can safely put it
At this point I ask: is there a system to restore it and make it functional again or do I have to throw it away?