I don't have the option
To use boot from phone if my phone isn't in recovery mode
Now, in recovery mode :
Then, I've the full access to my PC, I'm admin.
I followed
[Only registered and activated users can see links Click here to register]
Backup is OK
Informations of my phone :
MIJUE M680
The port_CarlivTouch-recovery-2_5-540x960.img seems don't work with my phone.
@katz24
Hi,
First boot your Phone normaly. Not in Recovery Mode!!!!
USB Debugging on.
Then start MTK Droid Tools as Admin.
I see your Pictures. You are wrong in Recovery Mode.
Boot new and select in MTK use boot from Phone! Then Recovery and boot.
The Color in the left corner must be green or you must select in the right corner "Root"!
Look at my Pictures. Step by Step.
Louis777
Hello,
I've lot of work at this moment.
I'll come back when I'd have free time.
Thx.
Quote:Recovery doesn't suit this phone!
AFAIK CWM does not work with UBIFS
but special CTR may..... if you choose the right pack.
open a Android terminal and run this command
look at the line that mentiosn /system
is it ext4....CWM should work
is it UBIFS ...CWM won't work
is it YAFFS....CWM won't work
(2014-09-14, 20:15)aus9 Wrote: [ -> ]Quote:Recovery doesn't suit this phone!
AFAIK CWM does not work with UBIFS
but special CTR may..... if you choose the right pack.
open a Android terminal and run this command
look at the line that mentiosn /system
is it ext4....CWM should work
is it UBIFS ...CWM won't work
is it YAFFS....CWM won't work
Hello,
I have on Star H1 with UBIFS Carliv CWM Recovery 2.4 & 2.5 V6 installed.
Flash only by SPFlash Tool with patched boot.img!!
Greetings
Louis777
Louis777
If you are replying to me, you may like to look at my tablet entry here
[Only registered and activated users can see links Click here to register]
I am almost there but touch no workee.
feel free to comment on my fstab....as I am not skilled with UBIFS
cheers and sorry for being off topic to OP....but it is kind of on topic because you can't use CWM with UBIFS
I have a reply from upstream maintainer of CTR
CTR touch is not supported by KitKat kernels for recent version.
He suggests there is a volume button menu for "GO BACK" but its for version
1.5.
I shall test when I can.
cheers
(2014-09-15, 09:49)Louis777 Wrote: [ -> ][quote='aus9' pid='32110' dateline='1410696924']
Quote:Recovery doesn't suit this phone!
AFAIK CWM does not work with UBIFS
but special CTR may..... if you choose the right pack.
open a Android terminal and run this command
look at the line that mentiosn /system
is it ext4....CWM should work
is it UBIFS ...CWM won't work
is it YAFFS....CWM won't work
Hello,
I forgot my Bellyache about the Flash Process. I think, it is like you wrote. Maybe it work - maybe it don't work!
It is to complicated with 4.4.2 and you can maybe brick the Phone!
Buy a new one with emmc!
Greetings
Louis777
Hello,
I've lot of work at this moment.
I'll come back when I'd have free time.
Thx.
katz24
Quote:The port_CarlivTouch-recovery-2_5-540x960.img seems don't work with my phone.
I hope you know you can't use that without porting it.
You need to grab your working boot image.....extract the kernel from it and replace it into the carliv.
You need to grab your working recovery image.....extract the
ramdisk etc/recovery.fsatb
AND all init*rc files and replace them instead of the carliv files.....leave the actual init file alone.....its an executable
2) but your init.usb.rc file from your working image may still have errors because it too may be a port from another phone so they tend to get product id wrong.
I have had no success myself on this......as the device I have is UBIFS which is sadly one of my greatest mistakes in buying.
good luck