www.chinaphonearena.com

Full Version: I need MTK 6572 Hisense U939 wire Rom To flash it via PC
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
I need MTK 6572 Hisense U939 wire Rom To flash it via PC
I had TF SD card room which is bin file couldn't flashed via PC,
what i need is wire ROM as i whole format my flash,so couldnt use card ti flash ROM
I search and found this link:
I search for wire ROM and found this file:海信U939官方线刷包.rar at
[Only registered and activated users can see links Click here to register]&shareid=332455714&third=0
which is protected by password so i cann't extracted the files
please help me by give me the password as it not mentioned
or please give me a Wire ROM
Thanks in advance
Try this:
[Only registered and activated users can see links Click here to register]

Have a 30% charge or higher!

The button/link to download the file with is below the orange one. Press it and download. Unzip the file and put the folder "u939" on a SD card. Put the SD card in the phone and make sure the phone is off.

Then, press the volume up, volume down and power button together. The phone will boot into upgrade mode. It will take a few minutes to flash it. While the phone is flashing, don't touch the phone!

When the flash is finished, the phone will display "OK". After that, remove the battery for a few seconds and put it back in again. Then start the phone with the power button.

When the phone has booted up, factory reset the phone.

Hope I could help you!
Freely translated from: tiny.cc/hisenseu939
how to boot the phone it dosnt work