www.chinaphonearena.com

Full Version: Please help me! My phone is dead after I flash a wrong preloader
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
Please help me!!!!!!!!!!

My phone is dead after I flashed a wrong preloader

my phone model is iNew V3 PLUS (V3a) "cxq_v3a_inew_V04" version.

I was doing these steps: :

1- Disconnet the battery and wait 10 seconds

2- Open flash tools with the scatter file

3- Connect the phone usb cable to pc

4- Plug in the battery on the phone

==> MTK USB PORT (COM XX) ok : drivers on the pc seems to be ok

5- On flash tools press download

every time I get BROM ERROR : S_DL_GET_DRAM_SETTING_FAIL (5054)

[EMI] Enable DRAM fail

I have yet tried over than 20 ROMs and error persists.

[Image: Cap_Error01.jpg]

Please!!!! Help me!
Change your sequence.

1. Open sp flash tool as administrator
2. Load scatterfile
3. Click on Download. But I think for your situation should be firmware upgrade (everything ticked!)
4. Plug in phone to PC.

Sometimes it works with battery sometimes without.
And do firmware upgrade.
Also don't put many drivers, you'll confuse the PC.
If you put in wrong drivers you have to uninstall. Then get usbdeview from here [Only registered and activated users can see links Click here to register] and remove phone ids.
Same error my friend Sad
I have marked preloader check, but i don't have any preloader.bin file to load.
And i use XP. Those drivers that you say are for Win 8
Why not? Download a stock ROM with preloader.

I'm not recommending drivers. I said usbdeview program. Use that to tremove phone ids.
(2014-12-23, 09:36)tiefighter_85 Wrote: [Only registered and activated users can see links Click here to register]

and no one bring the preloader.bin file Sad

Do you know where can i download any rom with that file?
If you find some one please! tell me!

Anybody can help me?
PLEASE!!!!!!!!!!!!!!!!!
Thanks a lot "tiefighter_85"!!!!!!!

Need help PLEASE! I am desesperate!
I'M SO HAPPY!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! PROBLEM SOLVED!!!!!!!!!!!!!!!!!!!!!!!

I flashed this rom…[Only registered and activated users can see links Click here to register] with preloader checked and i bricked fully the phone. Sad

Then [Only registered and activated users can see links Click here to register] give me this [Only registered and activated users can see links Click here to register] and i flashed just it, no more, and all WORKS AGAIN!
Thank you soooooooooooo much GENIUS dancer16121983
Here you can view details… [Only registered and activated users can see links Click here to register]
please help my preloader my phone leagoo m8 please help [Image: 7c75ad67ed06.png]