www.chinaphonearena.com

Full Version: 6.1 inches large screen Kay sent T61 users how to disassemble the internal work
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
6.1 inches large screen Kay sent T61 users how to disassemble the internal work exposure
Date: 2013-06-30 Source: Original Author: little wind hits: 20482 Views View comments
Kay sent this year, pushing the T-Mobile Taichi series of new machines were officially listed earlier, super six inches HD screen, quad-core products giant screen to win the attention of many large-screen control, we know that Kay sent T61 equipped with MTK6589 quad-core platform, 1G/2G RAM +16 G ROM has a memory and a
Kay sent this year, pushing the T-Mobile Taichi series of new machines were officially listed earlier, super six inches HD screen, quad-core products giant screen to win the attention of many large-screen control, we know that Kay sent T61 equipped with MTK6589 quad-core platform, has 1G/2G RAM +16 G ROM memory, and 5000000 +1300 megapixel dual high-definition cameras, mainstream configuration, while the interior Kay sent T61 how to work? Follows the name "heym" Friends of the machine apart T61, take a look at how he said.

We strongly urge the shoes should be the same, risking not insurable risk, open to everyone my love machine to be a simple evaluation .
Kay sent T61
Celestial also has a good machine, the machine shell work has not lost Gaolibangzi goods, and be careful out under the wire gong, remove the back cover and saw. . . . . Work has been catching up with the big brands, the volume alone, the power button has no ordinary cottage than the T61 has to spend a flexible flat plug connection clip board instead of the usual cottage directly by hand soldered on the motherboard well worth mentioning is the transmitter, T61 spend the small square type, this microphone is not an ordinary small cottage comparable round microphone, not a grade stuff.

Kay sent T61
Motherboard positive

Kay sent T61
Back of the motherboard

We look at mobile phone board, made out of craft production line thing in the distance, than ordinary cottage, better than the big brands still a little gap. But. . . . . Very good point is, almost all the other parts are done on one surface of the substrate, so that the thickness of the machine for reduced while improving chip cooling are very good, the machine's front cover between the motherboard with no fever loom parts to produce heat for the other pieces are one after the shell, so that heat is distributed out of the back cover refers to machine without having circulated internally in the machine can not.

Kay sent T61

Kay sent T61

Kay sent T61 This article comes from MTK mobile phone network http://www.mtksj.com
Then there is a same shoes were mentioned, into the gray problem, ha ha, the machine front, there is a little bit below the individual machine gap, it is just in front of the shell after shell adhesion problems, never locked into the gray does not problem can be seen that the machine with the touch screen before the shell is very tight fit. These represent my personal opinion, do not agree with is the oil they recognize something, huh, huh.

Kay sent T61

Finally a reminder, disassemble after longer enjoy free warranty, everybody be careful.