Login

**bbq88** · (This post was last modified: 2014-03-25, 01:28 by bbq88.)

(2014-03-25, 01:10)nikstar Wrote: So it looks like they separate the models according the 3g network (WCDMA).
So this means that there is hardware differences and we cannot enable 900mhz at 850mhz models!

Obviously there are 2 versions. One is the WCDMA which we are on our hands and the other is the TD version which is for China market.

The spec of V3 never says it support WCDMA 900

(2014-03-25, 01:10)nikstar Wrote: What does the "yes" and "no" means? Fixed and no fixed?

That's what they write in the changelog. Pass on self test -> Yes/No

Meaning behind, I have no idea la Tongue

**nikstar** · 2014-03-25, 01:32

Will you flash it?

**bbq88** · (This post was last modified: 2014-03-25, 01:43 by bbq88.)

Finished flashing with update.zip using stock recovery. Everything works fine.

Model number: V3
Build number: cxq_v3_inew-v1.0.8 (check by *983*32#)
Internal serial: CHUANGXINQI-EN-INEW-QB15AFD-S539-6582V1.0.0B09 (check by *789*1#)

Camera spec: same as 1.0.7
Seems again one big partition: Phone storage 13.49GB, available 13.09GB

**zatycz** · 2014-03-25, 01:46

(2014-03-25, 01:40)bbq88 Wrote: Finished flashing with update.zip using stock recovery. Everything works fine.

Model number: V3
Build number: cxq_v3_inew-v1.0.8 (check by *983*32#)
Internal serial: CHUANGXINQI-EN-INEW-QB15AFD-S539-6582V1.0.0B09 (check by *789*1#)

Camera spec: same as 1.0.7
Seems again one big partition: Phone storage 13.49GB, available 13.09GB

Can you please upload it to mediafire or mega please? It looks like it will solve home button bug.

**bbq88** · 2014-03-25, 01:51

(2014-03-25, 01:46)zatycz Wrote: Can you please upload it to mediafire or mega please? It looks like it will solve home button bug.

OK. Will do it before go to bed. Hope upload is ready tomorrow morning.

**Jolly ZG** · (This post was last modified: 2014-03-25, 02:23 by Jolly ZG.)

(2014-03-25, 01:40)bbq88 Wrote: Finished flashing with update.zip using stock recovery. Everything works fine.

Model number: V3
Build number: cxq_v3_inew-v1.0.8 (check by *983*32#)
Internal serial: CHUANGXINQI-EN-INEW-QB15AFD-S539-6582V1.0.0B09 (check by *789*1#)

Camera spec: same as 1.0.7
Seems again one big partition: Phone storage 13.49GB, available 13.09GB

When you test a little more time then let us know if everything is correct, and it would be good news because after half an hour of use is not relevant information

hmm, time flies ... my speed is 12MB down and 6MB upload and now I'm trying to download the rom but the rate of 7-8KB/s, so I gave up again.II have a sense of when someone will create a good and stable rom (maybe v 1.9 0.9), it will take a long time, I'll probably sell this phone and buy a new one, because for many years I have this habit, and it will be very sorry to leave you all, and that is why I here to make my phone work better with your help, and I do not want every week to install a new rom and spend the time it takes to download a few hours in today's modern age, there is always the fear of ruin my beautiful and relatively well iNew v3.I it did many years ago WM 5 or 6 OS, but I was not afraid I was much rom, but little tiny problem

**joaoameixa** · 2014-03-25, 02:24

INSTALLED, home button FIXED finally Big Grin

, i will do some tests now, just 1 question , is possible install a recovery 6 at this rom? IF yes, where i can find it?

**Andrew88** · 2014-03-25, 02:28

(2014-03-25, 02:24)joaoameixa Wrote: INSTALLED, home button FIXED finally , i will do some tests now, just 1 question , is possible install a recovery 6 at this rom? IF yes, where i can find it?

How do you have upgrade it?? With flashtool or cwm? If you've used flashtool with download only mode or with firmware->upgrade??

**joaoameixa** · 2014-03-25, 02:31

With flashtool, yap just select file and then firmware upgrade

**Quad** · 2014-03-25, 02:32

So you didn't lost data?

Login
Username:
Password:	Lost Password?
	Remember me