|
Who's Online
|
There are currently 1419 online users. [Complete List]
» 3 Member(s) | 1416 Guest(s)
|
|
|
|
Thread Rating:
- 1 Vote(s) - 5 Average
- 1
- 2
- 3
- 4
- 5
|
[Innos D6000] All current ROMs download Innos D6000 ROM
|
Posts: 3,184
Threads: 555
Joined: 2013-02-10
Points:
21,230
Reputation: +3638
All current ROMs for Innos D6000 downloadable from yadi.sk instead of Baidu. Please add new ROM links or specific ROM comments in this thread. Thanks to @"crusades" and @"rygi25" for uploading to non-Baidu host.
Latest release v3.0 28-DEC (CN/EN - no gapps)
PC: [Only registered and activated users can see links Click here to register]
SD: [Only registered and activated users can see links Click here to register]
Mirror non-Baidu SD install: [Only registered and activated users can see links Click here to register]
v3.0 Beta 24-DEC (CN/EN - no gapps)
PC: [Only registered and activated users can see links Click here to register]
SD: [Only registered and activated users can see links Click here to register]
Latest Multilanguage+GAPPS v2.4 (phone info shows 2.3 after install)
SD install: [Only registered and activated users can see links Click here to register]
PC flash: [Only registered and activated users can see links Click here to register]
v2.3 Multi+GAPPS (phone info shows 2.2 after install)
PC flash: [Only registered and activated users can see links Click here to register]
Mirror
Yadi SD: [Only registered and activated users can see links Click here to register]
Dropbox SD: [Only registered and activated users can see links Click here to register]
v2.7
PC: [Only registered and activated users can see links Click here to register]
SD: [Only registered and activated users can see links Click here to register]
v2.6
PC flash: [Only registered and activated users can see links Click here to register]
SD card flash: [Only registered and activated users can see links Click here to register]
PC flash Yadi:
[Only registered and activated users can see links Click here to register]
SD card flash Yadi (thank you crusades): [Only registered and activated users can see links Click here to register]
5.1.1 v2.5
Full SD flash (use this if already on 5.1. Copy to SD, flash with stock recovery)
[Only registered and activated users can see links Click here to register]
Full PC Flash (may need to use this if coming from Android 5.0 Common v1.1)
[Only registered and activated users can see links Click here to register]
Mirror non-baidu v2.5
SD flash:
[Only registered and activated users can see links Click here to register]
PC flash:
[Only registered and activated users can see links Click here to register]
5.1.1 v2.4: [Only registered and activated users can see links Click here to register]
D6000 v.1.0 (755 MB), 08.08.2015 Beta 5.1 w/gapps and multilanguage Firmware 5.1.1, with only the Chinese and English languages (CN / EN), without GAPPSD6000 v1.0 (468 MB), stable version 09.06.2015 D6000 v1.1 (476 MB), 02.07.2015 D6000 v2.0 (489 MB), Stable Version from 12.08.2015 D6000 v2.01 beta (485 MB), 06.08.2015 D6000 v2.1.0_beta (485 MB), 21.08.2015 D6000 v.2.1.1 beta (489 MB), 26.08.2015 D6000_v2.1-ota-eng (501 MB), Stable Version from 11.09.2015, update via System Update or "over the air" (OTA), and only from stable D6000 v2.0. D6000_v2.3 (521 MB), from 25.09.2015, Stable Version
Thank you @RM4Y of another forum
Two roads diverged in a yellow wood,
And sorry I could not travel both
And be one traveler, long I stood
And looked down one as far as I could
To where it bent in the undergrowth
Posts: 21
Threads: 3
Joined: 2015-09-22
Points:
228
Reputation: +20
Can I install the ra.gz files only with the QFIL programm or also with the built-in Syetm update function?
You like this post
Posts: 199
Threads: 7
Joined: 2015-09-28
Points:
2,079
Reputation: +127
Need to do with QFIL. I just went through the same problems. Port would not be recognized, but finally it triggered.
Posts: 21
Threads: 3
Joined: 2015-09-22
Points:
228
Reputation: +20
2015-09-29, 22:17
(This post was last modified: 2015-09-29, 22:37 by shisaya24.)
(2015-09-29, 22:04)MegaManX Wrote: Need to do with QFIL. I just went through the same problems. Port would not be recognized, but finally it triggered.
@"MegaManX" How did you manage to get it recognized? I once managed but only once and it didnt flash then. Also I cant get my D6000 to boot into bootlaoder or fastboot through adb shell commands...
Any advice would be greatly honored 
I got it to recognize somehow now... but when i try flashing v2.3 in QFIL it gives me this error:
![[Image: hpcrt943.png]](http://fs5.directupload.net/images/150929/hpcrt943.png)
Posts: 199
Threads: 7
Joined: 2015-09-28
Points:
2,079
Reputation: +127
You can get to fastboot by boot to recovery (hold volume up and power for about 10 seconds, as soon as you see screen go dark, release buttons). Then choose reboot to bootloader.
About the error you have with QFIL, i'm not sure. I think is a failure of the phone to switch to to the proper mode. It looks like the wrong port driver too. Mine and some others was 9008, not 9091.
Maybe try to remove the qualcomm driver with USBdeview. Then reinstall another Qualcomm driver.
by the way, this is the last driver I installed:
[Only registered and activated users can see links Click here to register]
Can also try this one:
[Only registered and activated users can see links Click here to register]
You and WuddaWaste like this post
Posts: 21
Threads: 3
Joined: 2015-09-22
Points:
228
Reputation: +20
(2015-09-30, 01:16)MegaManX Wrote: [Only registered and activated users can see links Click here to register]
Can also try this one:
[Only registered and activated users can see links Click here to register]
Sadly none of these work for me :/
You like this post
Posts: 13
Threads: 2
Joined: 2013-04-05
Points:
212
Reputation: +24
(2015-09-30, 03:26)shisaya24 Wrote: [Only registered and activated users can see links Click here to register]
QFIL: [Only registered and activated users can see links Click here to register]
Goodluck! 
MegaManX and WuddaWaste like this post
Posts: 21
Threads: 3
Joined: 2015-09-22
Points:
228
Reputation: +20
(2015-09-30, 05:40)nathanzahra Wrote: Try this (how I got it to work):
01. Disconnect phone from PC.
02. Enter 'Device Manager', go to View > Show Hidden Devices, and Uninstall and (Check) Delete for any previous driver installations having the name similar to "Qualcomm HS-USB".
03. Connect phone to PC. Keep 'Device Manager' open throughout this operation.
04. Make sure the device is booted and it is set to charging mode.
05. Refresh Device Manager and you should see 3 'Android' devices marked with a question mark.
06. Update each of the 'Android' devices using the Qualcomm drivers (just point to that folder).
I cant even updtae with those drivers because when I delete all hidden drivers as you said and then reconnect the phone it somehow installs the Qualcomm HS-USB shit once again, so I dont get the Android devices with the triangle but 3 different Qualcomm HS USB things ... I tried updating their drivers but it didnt work and QFIL still doesnt do the job and detect any new port or something...
Any suggestion how I can get windows to not reinstall the Qualcomm shit itself every time I connect my phone? Thanks a lot
You like this post
Posts: 13
Threads: 2
Joined: 2013-04-05
Points:
212
Reputation: +24
2015-10-01, 00:58
(This post was last modified: 2015-10-01, 03:18 by nathanzahra.)
(2015-09-30, 21:36)shisaya24 Wrote: [Only registered and activated users can see links Click here to register]
Take care.
You like this post
Posts: 1
Threads: 0
Joined: 2015-10-29
Points:
19
Reputation: +1
Hi,
Can you provide a non Baidu link for the 2.5 please? I tried to download from there but I stuck in phone verification step, I even tried QQ without success. I had the same problem trying to download from official innos forum but also all links are from Baidu. I even tried with getsmscode but the free sms is half encrypted...
Version 2.5 it works for Qualcomm MSM8939?
Thank you in advance.
You like this post
|
| Possibly Related Threads… |
| Thread |
Author |
Replies |
Views |
Last Post |
| |
TWRP 3.0.2 innos d6000 android 6.0.1 |
kluknawa235 |
4 |
4,840 |
2019-06-17, 13:58
Last Post: t-oster
|
| |
Summary to install 5.1.1 ROM and 6.0.1 ROM |
stevejc |
40 |
18,823 |
2018-10-25, 22:38
Last Post: Andyoqi
|
|
[Question] Help please - D6000 - Cannot escape factory default - In Chinese! |
NeverSurrender |
0 |
2,335 |
2018-06-25, 18:40
Last Post: NeverSurrender
|
| |
[Innos D6000] ROM PC flash tutorial (wire brush) |
GizBeat |
30 |
39,547 |
2018-05-01, 06:20
Last Post: nathanzahra
|
| |
Innos D6000 QCN/NVRAM |
rygi25 |
14 |
6,494 |
2018-01-08, 00:30
Last Post: rygi25
|
Users browsing this thread: 1 Guest(s)
|
|
![[-]](https://www.chinaphonearena.com/forum/images/collapse.png "[-]")
