Posts: 1
Threads: 0
Joined: 2019-05-07
Points:
11
Reputation: +1
Can someone post the rom for KB0004C? cant find it, my brain its going to explode
Posts: 3
Threads: 0
Joined: 2019-10-13
Points:
61
Reputation: +3
Hello, I have a problem with the lk.bin of my tablet kt107 after putting the system for a problem of brickeo my tablet turns on with a black screen and after a while it turns white I would like to see that person has these same specifications to share with me your full backup with the mt6580 scatter file would appreciate it with the soul
Posts: 5
Threads: 1
Joined: 2019-01-24
Points:
200
Reputation: +0
Versão em Português.
Eu possuo o mesmo tablet a mesma placa, processador e lcd. Suas dicas me ajudaram muito. O meu está com o problema do LCD as luzes estão acesas e a tela preta. Consegui instalar um custom com android 5.1 porém foi mudado as configurações de memória e nand(armazenamento).
Se você tiver uma tela preta, mas as luzes estiverem acesas, na parte traseira do tablet, é o componente do LCD da ROM. Isso pode ser alterado e é um pouco mais complicado de explicar em um post; então, esperarei até que você conclua o acima / abaixo e volte para mim antes de explicar a alteração dos componentes do LCD.
Recebi uma cópia do vendedor do aliexpress e ao instalar o as luzes atras no led ficam acesas e a tela preta. Se eu mudo o terceiro componente do hardware de 4d0 para 370, a tela funciona mais aparece o "boot error!!!!!!", se eu deixo em 4d0 não sei o que acontece pois somente as luzes na parte de tras ficam acesas, eu não sei se está tendo algum erro de boot.
Por favor me oriente como resolver o problema do LCD ou Boot Error!!!
Versão translate
I have the same tablet, the same board, processor and lcd. Your tips helped me a lot. Mine has the LCD problem, the lights are on and the screen is black. I managed to install a custom with android 5.1 but the memory and nand (storage) settings were changed.
If you have a black screen, but the lights are on, on the back of the tablet, it is the LCD component of the ROM. This can be changed and is a little more complicated to explain in a post; so i will wait until you complete the above / below and come back to me before explaining the change of the LCD components.
I received a copy from the seller of aliexpress and when installing the lights behind the led are on and the screen is black. If I change the third hardware component from 4d0 to 370, the screen works more like "boot error !!!!!!", if I leave it at 4d0 I don't know what happens because only the lights on the back are on , I don't know if you are having a boot error.
Please advise me how to solve the LCD problem or Boot Error !!!
Posts: 1
Threads: 0
Joined: 2022-11-23
Points:
31
Reputation: +0
Please a firmware update for BMXC-K107-EEA, please!!!
Or a custom rom very new.
Please.