See post #2 for the 3GB mod. Deselect everything except for EBR1 and EBR2 after the scatter file is loaded.
Tested and working on Caesar a9600 / zp900h
Full tutorial on the main site at: [Only registered and activated users can see links Click here to register]
Quick and dirty:
Install ADB Drivers
Run Flash Tool and load appropriate scatter
Turn Off Phone
Click Download on Flash Tools
Plug in Phone
Go into CWM and factory reset, or restore a previous TWRP/CWM full backup, or install ROM from zip. If want to flash a ROM from PC, that's fine, however make sure EBR1 EBR2 are unticked, otherwise the partition mod you just did will be overwritten.
Two roads diverged in a yellow wood,
And sorry I could not travel both
And be one traveler, long I stood
And looked down one as far as I could
To where it bent in the undergrowth
Two roads diverged in a yellow wood,
And sorry I could not travel both
And be one traveler, long I stood
And looked down one as far as I could
To where it bent in the undergrowth
Further testing by AMV has gotten the 3GB mod working on Caesar a9600 / zopo zp900h .
I will try to get a version uploaded with the recent CWM recovery for a9600. Or if someone beats me too it, that would be great. Until then, leave recovery and everything else except EBR1 and EBR2 unchecked when you flash this mod.
You like this post
Two roads diverged in a yellow wood,
And sorry I could not travel both
And be one traveler, long I stood
And looked down one as far as I could
To where it bent in the undergrowth
I only get the 3GB mod to work, if I uncheck everything in SP Flash Tools except the preloader, EBR1 and EBR2. If I only uncheck recovery as described here, my phone won´t start.
(2013-04-02, 00:21)ontario Wrote: I only get the 3GB mod to work, if I uncheck everything in SP Flash Tools except the preloader, EBR1 and EBR2. If I only uncheck recovery as described here, my phone won´t start.
Yes, that was initially a test measure because we couldn't get the 3GB mod to work with just EBR1 and EBR2 (apparently there was some other issue, because AMV and you both have been successful), so we tested it by flashing the whole package. The reason your phone won't start is because you've flashed over everything in the phone. The way to remedy that is to SD Update a ROM from recovery, restore a backup from recovery or flash different ROM.
So now we know the 3GB ROM mod will work fine by just flashing EBR1 and EBR2. Two people have gotten it to work fine. Thanks for your help with troubleshooting. I'll modify the post now.
You like this post
Two roads diverged in a yellow wood,
And sorry I could not travel both
And be one traveler, long I stood
And looked down one as far as I could
To where it bent in the undergrowth
![[-]](https://www.chinaphonearena.com/forum/images/collapse.png "[-]")
