Login

**saberkhan** · 2016-04-16, 23:01

hello .

my device is elephone p4000 . i need CWM/TWRP Recovery for MTK6735p .

**kingsemperor** · 2017-10-18, 23:27

Well I also need a custom recovery but for a tablet : Yuntab H8 (2Gb 16GB), 8 inches) based on MT6735P.

Thanks in advance !

**Cleopatra** · 2017-10-19, 04:54

(2017-10-18, 23:27)kingsemperor Wrote: [Only registered and activated users can see links Click here to register]

BE CAREFUL : the stock rom is unconventional !

The recovery.img is the JRFT160107.img

2) Rename the JRFT160107.img in recovery.img
3) Unpack it with Carliv Image Kitchen.
4) Try to make a TWRP by yourself following the next thread :

[Only registered and activated users can see links Click here to register]

Good luck

**kingsemperor** · 2017-10-19, 05:01

(2017-10-19, 04:54)Cleopatra Wrote: [Only registered and activated users can see links Click here to register]

BE CAREFUL : the stock rom is unconventional !

The recovery.img is the JRFT160107.img

2) Rename the JRFT160107.img in recovery.img
3) Unpack it with Carliv Image Kitchen.
4) Try to make a TWRP by yourself following the next thread :

[Only registered and activated users can see links Click here to register]

Good luck

Thanks !! I never knew I could make my own recovery, I haven't seen the link yet, just excited to see your post ! if it works I owe you one Rolleyes

Thanks a lot and I will definitely give it a try ! I'll go through the tutorial and come back here to share my experience, in case that helps others.

**Rosszx10r** · 2017-11-16, 18:07

hi i flashed this stock rom it has caused black screen?

**Rosszx10r** · 2017-11-22, 03:14

Inhave work C version of firmware for yuntab h8 and working TWRP!

Sent from my SM-G935F using Tapatalk

**kingsemperor** · (This post was last modified: 2017-11-27, 23:16 by kingsemperor.)

I have tried this Carliv method but t does not work, at least for this Yuntab H8 recovery. I followed all the steps but no success.
I might try again as I still cannot find another option.

(2017-11-22, 03:14)Rosszx10r Wrote: Inhave work C version of firmware for yuntab h8 and working TWRP!

Sent from my SM-G935F using Tapatalk

I cannot understand your answer, but if you do have Yuntabs H8 TWRP, please share. Thanks

**abid27** · 2017-12-08, 01:14

Help root twrp coolpad e503 mtk m6735cp

**dljkacs** · (This post was last modified: 2018-01-01, 19:53 by dljkacs.)

(2017-11-27, 23:14)kingsemperor Wrote: [Only registered and activated users can see links Click here to register]
In Stock rom replace the original file with the attachment( JRFT160107.img).
Then flash whit BeTools.
Ready.
Press volume up and power button, select recovery, you can start here TWRP.
Good luck

**dljkacs** · (This post was last modified: 2018-01-01, 19:54 by dljkacs.)

Hi Friends!
Working TWRP for Yuntab H8:
[Only registered and activated users can see links Click here to register]
In Stock rom replace the original file with the attachment( JRFT160107.img).
Then flash whit BeTools.
Ready.
Press volume up and power button, select recovery, you can start here TWRP.
Good luck Big Grin

Login
Username:
Password:	Lost Password?
	Remember me