[ROM] Need Stock rom HYD T906, MT6582

[Loewe78]

[Dhamma Bodhisuttha]

I don't know which one you will choose.   It's may be for mainboard ID KT106D, while our mainboard ID is  Kt106G.
Anyway, hope you will success of trying

How about this one? (BDF firmware version 5.1)
[Only registered and activated users can see links Click here to register]

[Loewe78]

I tried the one with KT106D_D3 and, at least it booted. The one you posted is KT106D_D2 and didn't boot. I already tried it yesterday.

Today, I tried to create a pan.baidu account and failed at a magnificent level. It's not possible for me in Germany to register.

Edit:
I'm fairly sure, we'll find the solution for our difficulities here:

[Only registered and activated users can see links Click here to register]

Others might be happy with the entire list -just search the fw printed on your board (1st number, for me it's KT106G_D3_31_PIN aso aso.) or board number (for me, it's KT096G_D3_83_270_v1.0 aso.)

[Only registered and activated users can see links Click here to register]

Anybody here who knows someone with baidu-account or can register himself or herself? I tried hard but I failed. I even didn't manage to access with active accounts.

[Dhamma Bodhisuttha]

I'd downloaded firmware  kt106d_V03_D3_2+16G_31PIN_PORT_GMS_4G_1108 and install it,
with SP_Flash_Tool 5.1343 but no-boot at all , I have no idea what to do now.
What program/version do you use to install this firmware?


MY T906 use software  version KT107H-20190601 ฺ
custom build version T906_D3_31pin

I found only 1 model which is KTE T906 has exactky the same software custom build version T906_D3_31pin
but I still can not find any firmware for such model
From data in file build.properties, I know that the manufacture company is "KTE" and sell their tablet in brand "HYD"

So what shall I try? , may be have to try to flash rom using similar model instead

[Loewe78]

KTE, HYD-T906, KT107H-20190601, that's what I read for my device, too. You tried a FW KT106G_D3_2+16GB - it means 2GB RAM and 16GB ROM . Try with 1+16GB, this might work.

Anyhow, my device said it's Android 8.1 Kitkat (whid doesen't exist) and has a MTK6797 2Ghz processor with graphics prcessor Mal 400 -  processor MTK6797 includes a Mali T800 graphics processor. There are more inexisting but good-sounding things like 128MB ROM and 8MB RAM. When I opened the case, I found 16 GB ROM and 1GB RAM. Maybe the manufacturer KTE didn't produce the item I own at all or not as device T906, I don't konw. Looking in a different forum I must not link here (sorry Mr. Moderator, I simply forgot - don't be too angry) it looks exactly the same to a tablet brand BDF and to some tablets they sold in China. I linked the FWs. To put it that way: I am confident that if I look at what these dudes that fudged my tablet say and assume that it is not the way they tell whatever they tell- this might be closer to reality than what they say... all their lies are creating so much work.

Nonetheless, I tried to lokate fw KT107H-2190601 with no success at all. Nearest I could get are the KT107D and KT107H-files I posted the baidu-links. Sadly, I can't try them as I can't download them.

Thatt's why I tried many, many other FWs, including the fw I linked. It makes my tablet boot at least. Finding the right ROM might be looking for a needle in a haystack, though. Finally, I can't download the most promising pieces. Germany and most European countries are is geo-blocked from pan.baidu. I even can't download with an account of someone else. I presume, I learned the Chinese (their government) hates us or we (our government) hates the Chinese. Swiss, Russian, Ukrainian, American, Asian and lots of African countries seem to have better relations with China, they may open up a pan.baidu account.

I am considering to configure a proxy server somewhere where pan.baidu isn't blocked. Possibly, I'll need a vpn-server.

As far as I understood, reading the sticker on the processor, the first number (KT106G_D3 aso.) means the firmware for the motherboard it sticks on. This sticker ist attached by the producer of the motherboard, that's why I assume it doesn't lie to me. I might be wrong, though. Did you open the tablet and look on the sticker? There might be faked informations if you just read out the specs.


That's how I located the FWs KT106D_D3[...]1+16GB and the FW KT106G_D3[...]1+16GB. The latter, I'd be so happy to try as I am confident it's working. A translated Chinese webpage told me, it's really a MTK6582 it is for and not an MTK8382, as one might think reading the number after the D3. I don't know exactly, though.

I learned it's useful to look for the motherboard, the amount of RAM and ROM to get it boot. I read the screen isn't that big issue, mayb the digitizer and you need the correct preloader and uboot file to get the screen working. Others told it's important to have the right driver. I don't know who is true. I read it's unlikely to kill-flash MTK processors using spflashtool as long as you don't fake the scatter file, spflashtool won't let you flash dangerous firmware files. Until now, this was true - I don't know if this is always the case. So, any flashing might be a risk - I am taking it as my device is a brick now. If I don't resucitate it, it'll remain dead.

[Dhamma Bodhisuttha]

OK. let's try with some more firmware to find the right one.

[mydest994]

OK. let's try with some more firmware to find the right one.

It should be confirmed here that the tablet HYD-T906 is the fake tablet with fake specs, fake os, fake ram, fake rom, and Fake CPU. 
It's cpu is MT6582, not MT6797 as posted in their online store.

[Loewe78]

I managed to extract a preolader, a partition file one could use for a scatter file and the build.prop of my device. I extracted it from the ROM I pulled with the spflashtool - writeback function. It's preloader_kt096h_101 and, according to the tool I used for extraction, it's identical to the ones in other FWs containing a file with this name.

This might explain why the finally boot.

Unfortunately, I was too stingy to extract all 16GB - so my lk-file (which, as fas as I can read, analogous with the uboot file) is incomplete. To cut it short: My device won't start up correctly with only the correct preloader.

We'll need the correct LK-File, too. Presumably, we'll need the scatter file and some additional partitions, too. Otherwise, we might not be able to get correct graphics.

The stuff is already uploaded to the webdrive webdest994 created.

[Only registered and activated users can see links Click here to register]

I'll have a look to create more informations for creating a scatter file and upload a generic MT6582-scatter file to start with, too as I won't be able to continue today.

The program I used for extractiong the ROM is called WwR_2.5.1_eng.

In case someone is coming through the fred who can't boot the device with disalbed adb: Before flashing any other software, pull all the flash with spflashtoll writeback-funciton and split it with WwR_2.5.1, available with Russian and English GUI. You'll get a complete FW. It didn't work for me as I only extracted 2GB of my device.

[mydest994]

I flashed KT106D_V03_D2_1+16G _31PIN_PORT_GMS_0822 and  other firmware, I always get  error.

How could I  solve this error, any suggestion?

Please wait, maybe next week I may get some original files from those who buy this table model.

[Loewe78]

This doesn't seem to be the newest versoin of SPFT. Try the up-to-date-version - and look out for the correct drivers.