[How-To] Root Your PiPO M9 3G Tablet – Install Driver, Rooted ROM and CWM Recovery

[CHEESYALFREDO]

Root Your PiPO M9 3G Tablet – Install Driver, Rooted ROM and CWM Recovery

Turn your tablet off and make sure it has got 75% minimum charge
Connect your charger with your tablet
Run RKANdroidTool.exe file with admin right. It’ll show a message “No Found RKAndroid rock usb”
Connect the micro USB cable to the tablet and the other part with your computer
Press and hold the Esc key at the top right corner and click the reset button at the rear, on top of the LED light. A pin would do the job nicely.
Wait for the new hardware found sound from your computer and release the Esc key
Your computer will now install the drivers for your PiPO M9 3G tablet. You can do it manually browsing the files from the extracted folder as your OS.
The 1st button will turn Green after the 900SuperSupport ROM Flash Tool finds your tablet.
Check the Loader tick box at the top and click Flash ROM (This will erase all your files and install a new fresh Android 4.2.2 ROM with root)
Once done wait for few minutes for the installation and the tablet will reboot to CWM Recovery. Select Reboot System Now and wait for few minutes to boot up properly.