|
Who's Online
|
| There are currently no members online. |
|
Thread Rating:
- 0 Vote(s) - 0 Average
- 1
- 2
- 3
- 4
- 5
|
Help me flash my iNew v3
|
Posts: 8
Threads: 2
Joined: 2013-12-23
Points:
66
Reputation: +3
Can somebody please help me..
I bought iNew V3. It has 1.0.1 version so I decided to upgrade to 1.0.3 or 1.0.4
1. Do I need 1.0.3 before installing 1.0.4 or not?
2. I installed PDANet driver, turned on USB debugging but Flash Tools just won't recognize my phone. I select scatter file, start Firmware Upgrade, connect turned off phone with USB but it just not recognize it. It only starts to charge.
When I try holding Power ON + Volume UP, I just got some image of Robot [Android] with "No command" text under it.
What should I do?
Posts: 59
Threads: 3
Joined: 2014-01-18
Points:
1,020
Reputation: +169
2014-01-24, 00:08
(This post was last modified: 2014-01-24, 00:12 by GeekGirl.)
You can upgrade to 1.0.4 without any problem, just backup your data if you want to use Flashtool for this if you dont want to loose any important things,
be sure that your mobile is switched off, and not any usb cable is inserted yet,
then start Flashtool and select the scatter file, click firmware upgrade, then put the battery in your phone and connect the usb cable, then it sees your phone and start to flash automaticly thats all 
with win7 or above then dont forget to start Flashtool as administrator
(2014-01-23, 23:51)ivan495 Wrote: Can somebody please help me..
I bought iNew V3. It has 1.0.1 version so I decided to upgrade to 1.0.3 or 1.0.4
1. Do I need 1.0.3 before installing 1.0.4 or not?
2. I installed PDANet driver, turned on USB debugging but Flash Tools just won't recognize my phone. I select scatter file, start Firmware Upgrade, connect turned off phone with USB but it just not recognize it. It only starts to charge.
When I try holding Power ON + Volume UP, I just got some image of Robot [Android] with "No command" text under it.
What should I do?
You like this post
Posts: 8
Threads: 2
Joined: 2013-12-23
Points:
66
Reputation: +3
No luck. 
Mobile is switched off, battery is out, USB debugging is ON, PDANet is installed.
I select scatter file, start Firmware Upgrade, put battery in, connect USB and Flash Tools just not recognize it. It stays at 0% and "Searching". Phone only starts to charge..
You like this post
Posts: 59
Threads: 3
Joined: 2014-01-18
Points:
1,020
Reputation: +169
2014-01-24, 01:02
(This post was last modified: 2014-01-24, 01:06 by GeekGirl.)
Weird  normally it will never fail, just retry the procedure, and be really sure that you run the spflashtool.exe as administrator else it fails, you dont need Usb Debugging it is in serial over usb (vcom) modus, firmware upgrade must be selected before you insert the usb cable.. (requires in the right order, first select button, then insert battery then insert cable) dont touch any buttons on yout mobile, if it still fails try another usb cable
(2014-01-24, 00:47)ivan495 Wrote: No luck.
Mobile is switched off, battery is out, USB debugging is ON, PDANet is installed.
I select scatter file, start Firmware Upgrade, put battery in, connect USB and Flash Tools just not recognize it. It stays at 0% and "Searching". Phone only starts to charge..
You like this post
Posts: 26
Threads: 2
Joined: 2013-05-04
Points:
311
Reputation: +16
2014-01-24, 01:05
(This post was last modified: 2014-01-24, 01:09 by Tommygr.)
(2014-01-24, 00:47)ivan495 Wrote: No luck.
Mobile is switched off, battery is out, USB debugging is ON, PDANet is installed.
I select scatter file, start Firmware Upgrade, put battery in, connect USB and Flash Tools just not recognize it. It stays at 0% and "Searching". Phone only starts to charge..
Connect as MTP, with USB debugging on.
Go to your Device Manager in Windows and you should see an entry under Android Phone.
If not, then you should reinstall the pdanet drivers. Try also another USB port in your pc.
If the device manager shows correctly that you are connected, then open sp flash tools version 5 as admin.
When you choose "Firmware Upgrade" and then click "Download", then connect the usb cable with your battery removed. Try it a few times (connect and disconnect usb cable from the phone) while flash tools is open and you have already clicked the Download button.
You and nadheem7880 like this post
Posts: 8
Threads: 2
Joined: 2013-12-23
Points:
66
Reputation: +3
I tried another USB cable and different USB, same thing.
When phone is on, and USB cable is connected, I can select MTP and it shows entry under Android Device..
And yes, I always "Run as Administrator" and I first start Firmware Upgrade and then put battery and then connect USB..
Posts: 5
Threads: 0
Joined: 2014-01-15
Points:
65
Reputation: +3
I faced the same problem a few days ago. Finally gave up and did the upgrade through stock recovery.
You like this post
Posts: 26
Threads: 2
Joined: 2013-05-04
Points:
311
Reputation: +16
(2014-01-24, 01:27)ivan495 Wrote: [Only registered and activated users can see links Click here to register]) , click in the green area to download it, then install it and connect your phone with usb debuggin on. This program is to root your phone, and it will update the usb drivers. With that method i was able to flash the roms immediately through flash tool, without worrying about the usb drivers.
You like this post
Posts: 8
Threads: 2
Joined: 2013-12-23
Points:
66
Reputation: +3
I really don't know what to do..
When phone is on and I connect USB, i can connect MTP and it shows Android in Device Manager.
But when phone is off, without battery and I connect USB, MT65xx Preloader driver won't install. I downloaded driver and tried to install it manually with "Browse" thing but it won't work. I think this is the problem.. It just keep refreshing and I can't install this driver..
What should I do?
You like this post
Posts: 59
Threads: 3
Joined: 2014-01-18
Points:
1,020
Reputation: +169
(2014-01-24, 02:34)ivan495 Wrote: [Only registered and activated users can see links Click here to register]
|
| Possibly Related Threads… |
| Thread |
Author |
Replies |
Views |
Last Post |
| |
Please help me! My phone is dead after I flash a wrong preloader |
mdromed |
6 |
6,935 |
2017-03-15, 03:43
Last Post: dorin2002293
|
| |
[Question] Many apps crashing at the same time,Inew v3+ Miui 7 rom |
nintendo |
0 |
2,823 |
2016-05-02, 23:08
Last Post: nintendo
|
| |
[Question] encryption iNew v3 |
han |
0 |
2,850 |
2016-04-23, 15:39
Last Post: han
|
| |
iNew V3 support for UVC |
han |
2 |
4,304 |
2016-04-09, 00:52
Last Post: han
|
| |
[How-To] external camera on iNew V3 |
han |
0 |
3,170 |
2015-12-28, 23:30
Last Post: han
|
Users browsing this thread: 1 Guest(s)
|
|
![[-]](https://www.chinaphonearena.com/forum/images/collapse.png "[-]")
