[Question] Gps dont work

[Jolly ZG]

In my YGPS tab my STATUS is unavailable =/ in your say's avaliable
And i cant add YGPS shorcut with nova launcher, is not there at shorcuts

You have to open the shortcut and the first item is "Activates" and there is YGPS. Touch it and the lower touch logo again, then it will be on the homescreen

[joaoameixa]

Y i find that, in my status say unvaliable, can find too many satellites but didnt connect to anyone

[Jolly ZG]

Y i find that, in my status say unvaliable, can find too many satellites but didnt connect to anyone

verify that the A-GPS turned on .. go to settings> location acces> gps satellites...
by the way, so all you wrote in the post #2

[prilepa_mg]

so ,i try 5-6 gps apps.all they work exept igo(primo,my way).after the 1 catch with ygps, 2 days now no problem with the cold strat (5 sec),with igo didnt catch signal.i dont now why.

[leakydog]

so there is no way how to make GPS usable? mine lock fast only without movement inaccurately (20m) and even in this situation it jump on map to somewhere in the fields :-(

[Andrew88]

Y i find that, in my status say unvaliable, can find too many satellites but didnt connect to anyone

I'm in the same situation. Status is unavailable.

[leakydog]

if you did some tweaks already and still nothing changed, try turn off and then turn on your phone. I dont know why, but my GPS started to work after battery swap :-)

[Andrew88]

if you did some tweaks already and still nothing changed, try turn off and then turn on your phone. I dont know why, but my GPS started to work after battery swap :-)

But mine is a different problem. I've flashed lewa ROM and problems are related to that.

[cmd77]

GUYS,
to check if an antenna/signal power problem (wich I suspect it is, please do the following:
1° start gps
2° open mobileuncle -> Engineer mode->Enginner Mode (MTK)->
tab "LocationBased Service"->Tab "GPS"
choice "GPS(OFF)" button and click tu turn GPS(ON).
Wait in clear sky to have a fox 2-3 minutes and please post here either a print screen of "LocationBased Service"->Tab "GPS" or please write here the values of SNR wich will be after Sattelite count/Sattelite Num and PRN
SNR means Signal To Noise Ratio and tells how strong is the signal from every sat.
Than we will se if is am antenna problem or something else

[Andrew88]

i can't to take a screen. I write what i read.

Reference Lat=0,000000 Lng=0,000000
Timer=284

Satellite count= 223
Satellite num=10
PRN=2 SNR= 0.0 AZI=303.0 ELE= 28.0 false
PRN=4 SNR= 0.0 AZI=244.0 ELE=46.0 false
PRN=7 SNR= 0.0 AZI=187.0 ELE=61.0 false
PRN=8 SNR= 0.0 AZI=198.0 ELE=31.0 false
PRN=9 SNR= 0.0 AZI=209.0 ELE=23.0 false
PRN=10 SNR= 0.0 AZI=311.0 ELE=56.0 false
PRN=13 SNR= 0.0 AZI=24.0 ELE=67.0 false
PRN=16 SNR= 0.0 AZI=65.0 ELE=19.0 false
PRN=20 SNR= 0.0 AZI=128.0 ELE=20.0 false
PRN=23 SNR= 0.0 AZI=63.0 ELE=39.0 false