|
Who's Online
|
There are currently 3371 online users. [Complete List]
» 5 Member(s) | 3366 Guest(s)
|
|
|
|
Thread Rating:
- 1 Vote(s) - 5 Average
- 1
- 2
- 3
- 4
- 5
|
[Tutorial] Gizbeat 101 CWM/TWRP Root 4.2.1
|
Posts: 22
Threads: 4
Joined: 2013-05-31
Points:
17
Reputation: +16
hi,
just rooted my phone with that files and they worked ok
The quick guide should more like this:
5. Turn Off Phone, pull out the battery
6. Plug USB cable without the battery
7. Click 'DOWNLOAD' on Flash Tools
8. Insert Battery - You will see it install the ROM. It should finish with a green circle
Thanks and regards
Posts: 3,182
Threads: 555
Joined: 2013-02-10
Points:
21,230
Reputation: +3636
(2013-06-20, 19:11)SamPT Wrote: hi,
just rooted my phone with that files and they worked ok
The quick guide should more like this:
5. Turn Off Phone, pull out the battery
6. Plug USB cable without the battery
7. Click 'DOWNLOAD' on Flash Tools
8. Insert Battery - You will see it install the ROM. It should finish with a green circle
Thanks and regards
You're correct, it should read 'Download', not 'Upgrade Firmware'. It doesn't matter if you plug in the USB after or before removing the battery. It can be done either way.
Two roads diverged in a yellow wood,
And sorry I could not travel both
And be one traveler, long I stood
And looked down one as far as I could
To where it bent in the undergrowth
Posts: 22
Threads: 4
Joined: 2013-05-31
Points:
17
Reputation: +16
(2013-06-20, 19:14)Gizbeat Wrote: (2013-06-20, 19:11)SamPT Wrote: hi,
just rooted my phone with that files and they worked ok
The quick guide should more like this:
5. Turn Off Phone, pull out the battery
6. Plug USB cable without the battery
7. Click 'DOWNLOAD' on Flash Tools
8. Insert Battery - You will see it install the ROM. It should finish with a green circle
Thanks and regards
You're correct, it should read 'Download', not 'Upgrade Firmware'. It doesn't matter if you plug in the USB after or before removing the battery. It can be done either way.
Hm I tried with the way from guide and didn't work, had to manage to try few combinations 
anyhow, awesome guide cuz it worked 
Posts: 2
Threads: 0
Joined: 2013-06-20
Points:
0
Reputation: +2
(2013-04-13, 02:14)Gizbeat Wrote: Updated 06 MAY 2013
8. Boot into recovery by holding vol+ and power together
9. Select 'update from SD'
10. Navigate to the previously copied superuser zip and select it
11. Reboot and verify root
I was able to do everything up until step 8. At that point I got a screen that looked something like Venetian blinds and I heard the ZOPO jingle. The phone was unusable.
I then went back to my old version which is 4.2.1. The phone is working but I do not know how to proceed. I have the 950+ with 16 GB of ROM.
Thank you for any advice you can provide.
MSS
You like this post
Posts: 37
Threads: 6
Joined: 2013-04-29
Points:
0
Reputation: +19
I just test that the light sensor will be malfunction if I install the TWRP recovery.
You like this post
Posts: 54
Threads: 10
Joined: 2013-05-10
Points:
123
Reputation: +51
Today I installed the new stock Rom on my ZP810 with flash Tool. After I installed Recovery.img with the scatter file. Flash tool went OK, but after I restart the phone with Power and Volume UP I can not get into recovery mode.
Anyone have an suggestion on what I did wrong or how to ge Recovery back?
Thanks
Posts: 100
Threads: 2
Joined: 2013-03-22
Points:
127
Reputation: +113
2013-06-30, 03:13
(This post was last modified: 2013-06-30, 03:14 by ChrisX.)
(2013-06-30, 02:29)ydur Wrote: Today I installed the new stock Rom on my ZP810 with flash Tool. After I installed Recovery.img with the scatter file. Flash tool went OK, but after I restart the phone with Power and Volume UP I can not get into recovery mode.
Anyone have an suggestion on what I did wrong or how to ge Recovery back?
Thanks
Try to boot to recovery with plugged usb cable to your pc.
If you have black screen effect, flash lk.bin (UBOOT) from cwm folder for jb 4.2.1.
GizBeat, ydur, aus9 like this post
ZP990 2/32 MT6589T | PS7 2/16 MT6592
Posts: 54
Threads: 10
Joined: 2013-05-10
Points:
123
Reputation: +51
(2013-06-30, 03:13)ChrisX Wrote: (2013-06-30, 02:29)ydur Wrote: Today I installed the new stock Rom on my ZP810 with flash Tool. After I installed Recovery.img with the scatter file. Flash tool went OK, but after I restart the phone with Power and Volume UP I can not get into recovery mode.
Anyone have an suggestion on what I did wrong or how to ge Recovery back?
Thanks
Try to boot to recovery with plugged usb cable to your pc.
If you have black screen effect, flash lk.bin (UBOOT) from cwm folder for jb 4.2.1.
Option 2 did help me thank you so much. 
You and GizBeat like this post
Posts: 1
Threads: 0
Joined: 2014-01-22
Points:
24
Reputation: +0
Hello, sorry but i had little problems trying to instal both recoveries:
I installed CWM using MobileUncleTools on my hero7500+, and when i push on "Start recovery mode" on the mobileUncletools app it works well, but when i have the phone turned off and want to start recovery mode using "power-off and volume+", it doesnt work... could someone help me pls? 
Thanks and sorry
Posts: 22
Threads: 1
Joined: 2013-08-20
Points:
108
Reputation: +20
Dear Gizbeat!
Can you fact what is the latest TWRP and CWM for this phone ?
May upgrade your tutorials.
As I know, last TWRP is 2.4.4.0
and
CWM 6.0.3.1 (or i'm not sure, 6.0.4.4 ???)
: [Only registered and activated users can see links Click here to register]
You like this post
|
| Possibly Related Threads… |
| Thread |
Author |
Replies |
Views |
Last Post |
| |
[Tutorial] CWM and Root tutorial for Hero H7500+ / ZP800H / ZP810 / MX56 |
GizBeat |
35 |
68,464 |
2016-03-27, 21:35
Last Post: etstudio
|
| |
[Tutorial] 4.1.2 TWRP Touch-Screen Recovery and Root Tutorial |
GizBeat |
5 |
11,198 |
2015-12-10, 22:45
Last Post: chudimoney
|
|
How to unroot - remove cwm |
SamPT |
1 |
4,408 |
2014-02-10, 18:48
Last Post: aliravian
|
| |
[Mod] New CWM recovery 24 APR 2013 |
GizBeat |
3 |
4,210 |
2013-11-12, 10:24
Last Post: Extour
|
|
[Solved] Help!! i can't root my h7500+ |
Joan |
6 |
6,592 |
2013-04-18, 14:23
Last Post: Joan
|
Users browsing this thread: 1 Guest(s)
|
|
![[-]](https://www.chinaphonearena.com/forum/images/collapse.png "[-]")
