Camera&flash not working after flashing rom on i5s mtk6582

[Hiendjack]

Boot your device into Recovery Mode (tap on Mobileuncle ... tap on Into Recovery Mode).
Wipe Cache & Wipe Dalvik Cache. In the main recovery menu select the ‘Install zip from SD card.
Select choose zip from sdcard 1 and select the zip of new rom.
Remember that into Recovery Mode you have to use the volume up & down to choose the action required ... and then press the power button to run the action that you have choosen.
Be patient during the process :-)

Yes, i already tried just now, but remember i only have the simple android system recovery < 3e> and there is no option to wipe dalvik cache there and i tried this with some rom earlier this week and every time i get an error during the install from sd card. I tried this rom you sent the last one and it began installing but an error soon that says : Error: Partition table not match
Installation aborted

[Cleopatra]

I'm too proud to cry ... but sometimes I would cry ... lol !
Try the Philz exe with the boot.img of the first new rom ... now you have the proper ADB driver ... it might works :-(

[Hiendjack]

I'm too proud to cry ... but sometimes I would cry ... lol !
Try the Philz exe with the boot.img of the first new rom ... now you have the proper ADB driver ... it might works :-(

Ok, will try this and after that i go to bed because it it already after midnight and have to get up early tomorrow, but i thank you for all your help today, much appreciated. Its a story , to be continued ;-)

---

I'm too proud to cry ... but sometimes I would cry ... lol !
Try the Philz exe with the boot.img of the first new rom ... now you have the proper ADB driver ... it might works :-(

Ok, will try this and after that i go to bed because it it already after midnight and have to get up early tomorrow, but i thank you for all your help today, much appreciated. Its a story , to be continued ;-)

Philz ask me what to do, see screenshot

[Cleopatra]

If it will doesn't work ... download this Philz :

[Only registered and activated users can see links Click here to register]

And if it will says you : "your recovery partition is only XXXXXX, ported Philz Touch might be oversize & causes it to loose the IMEi" ... follow these steps :
1)Press Yes.
2)Some window about your Chipset will popup.
3)Select your phone resolution.
4)Press OK.
There will be some question answer accordingly. In the First question answer NO.
5)It will then show a error click OK.
6)Now again open PhilZ recovery from a new folder named MTK-PhilZ it is automatically created in your Desktop.
7)Click OK.
8)Then Click ON NO.
9)It will ask you to put your stock recovery in stock folder.
10)Copy the Stock Recovery from BackUp-MTK-Recovery in MTK-PhilZ folder and paste it in Stock folder of MTK-PhilZ folder.
11)Again select your phone resolution and click OK.
12)Now select fb2png and tune2fs and press OK.
13)Click NO.
14)Click Yes.
15)Click Yes again.

---

I'm too proud to cry ... but sometimes I would cry ... lol !
Try the Philz exe with the boot.img of the first new rom ... now you have the proper ADB driver ... it might works :-(

Ok, will try this and after that i go to bed because it it already after midnight and have to get up early tomorrow, but i thank you for all your help today, much appreciated. Its a story , to be continued ;-)

---

I'm too proud to cry ... but sometimes I would cry ... lol !
Try the Philz exe with the boot.img of the first new rom ... now you have the proper ADB driver ... it might works :-(

Ok, will try this and after that i go to bed because it it already after midnight and have to get up early tomorrow, but i thank you for all your help today, much appreciated. Its a story , to be continued ;-)

Philz ask me what to do, see screenshot

select fb2png and tune2fs and press OK !!!

[Hiendjack]

Ok, i will later today ok, because it is almost 1AM now and have to be up early, so i thank you very much for today, all your help but for now , i really appriate it alot :-)
But for now really need to sleep ok? I'll catch you tomorrow proberbly if you are there. see you soon!

[Cleopatra]

Goodnight Netherlands ... read carefully my steps tomorrow :-)

[Hiendjack]

Goodnight Netherlands ... read carefully my steps tomorrow :-)

Thanks, you too good night for when you go to sleep and i will, don't worry :-)

---

Goodnight Netherlands ... read carefully my steps tomorrow :-)

Thanks, you too good night for when you go to sleep and i will, don't worry :-)

Hi, i'm back I don't know what time it is where you are..
I tried to follow the steps in your latest reply with Philz, but i downloaded it and it was exactly the same Philz as i already had

---

ofcourse i tried to do what should be done, but i can't with this philz

---

Ok, some good news now

I went on my father's laptop and he has windows 8 so i installed the adb composite driver on there and tried mtk droid tools and it worked, didn't freeze or anything. I also was able to make the scatter file for the rom you gave me.
As you can see the in the screenshot MT6592 is fake and is 6582 and tells fake hardware in kernelor firmware doesn't correspond to phone
Then i tried to get the temporary root shell on the phone with droid tool resulting in an error also in screenshot.
I also tried Philz and that resulted in the same outcome as on my computer.
Then i used the new made scatter file and i get a BROM error, see screenshot/
So i am a a little closer now to the solution, hope to hear from you soon what i can do next :-)

---

Ok, i think i managed to install CWM correctly on my phone , what do you think
i used the boot.img of the rom you send me and now it booted into CWM recovcery so i think its ok now right

---

Ok, i wiped cache partion and dalvik cache like you said and tried to install the zipped rom, but gets aborted, see screenshot

[Cleopatra]

Dear Ruud ... nice to meet you again :-)

The next time I suggest you to send me a private message to advise me that you've news (good or bad). I tell you it because all your last posts are joined ... and my phone hasn't notified them by mail. However, I have a question :
1) have you really installed Philz on your device ? (I can't see any purple screen). Did you maked it ? Well ... at first try to do a simple Factory Reset.
If it will doesn't works ... under "wipe format options" (on Philz) tap on "wipe cache" and "wipe dalvik /ART cache" ... and then, under "custom format options" tap on "format system", "format cache" and "format data" ... and try again to install the zip into microSD.
If all of these will don't work ... try to flash once again (with SP Flash Tool) the next two roms :

[Only registered and activated users can see links Click here to register]

[Only registered and activated users can see links Click here to register]

Please keep me update :-)

[Hiendjack]

Hello Cleopatra,

Nice to meet you again aswell
And yes i have sent you a private message last week, but i guess you did not receive it. It is impossible to get philz installed on that phone but like i mentioned with MTK Droid tools i installed CWM on it. And also flashed some
roms but no back camera/flash working. I also put CWM on my other i5s mtk6582 from last year and i flashed a couple of roms and the flash and camera keep working on that phone no matter which rom i put on it.
But after the latest flash on that phone, i know am stuck with a hard brick.
During the latest flash i accidentaly put on a rom that wasn't for this phone and flash tool said it was an update firmware and the preloader was checked. And ofcourse i realized no i shouldnt do that, but i wanted to pull out the lightning cable but then the the flash tool connected and it started going and it started the process, which resulted in a dead phone. After it was done i was left with a non responding device. The first time i plugged it in pc recognized it as something i cannot even remember now but the phone does not charge, can't put it on , it is completely non responding. The only thing it did was when plugged in it makes only the sound during connecting and then it says unknown device. So that is now even a bigger problem that from the other. Huge bummer

[Cleopatra]

Did you accidentaly put on a rom that wasn't for your phone ? Nooooooooo !
It's a very bad news :-(
Have you already tried to unbrick your device with SRS ?

[Only registered and activated users can see links Click here to register]

Install SRS exe ... and then, at the left of the panel (of SRS) click on "ADB toolbox" and then click "Reboot Recovery" in the right of the panel ... and fingers crossed :-)