D101 phablet. Stuck at "Decrypt failed, Boot Error!!!"

[flydr2]

Hi all, I have a D101 10.1in phablet that I bricked.

I do have a backup for SP flash Tool but when I try to boot, I get to the splash sreen with Decrypt failed, Boot Error!!!

I bricked it doing a memory test. (I know I should have read the warnings before... )
I have tried formatting it... tried to load recovery alone... I guess I've tried everything I could think off.

When I format it. It seems to work because there is nothing at all when I try to boot it.
When I flash the backup I get the splash screen again... (So it's alive... well barely)

here are the details of the phablet:

Hardware : MT6572
Model : D101
Build number : D101_ _20140816
Build date UTC : 20140814-062602
Android v : 4.2.2
Baseband v: MOLY.WR8.W1315.MD.WG.MP.V1.P5, 2014/04/21 15:29
Kernel v : 3.4.5 (buildserver@buildserver3) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP Thu Aug 14 14:24:26 CST 2014
Uboot build v : -----
LCD Driver IC : 1-d101_dpi_lvds



I also have a cwm backup and a Nandroid backup but since I can't get into recovery I can't use it.

Any ideas because I've run out???

Cheers
Marc

[Athos]

Have you tried booting into recovery with MTK Droid Tools? If you get into recovery, perform a factory reset.

[flydr2]

Have you tried booting into recovery with MTK Droid Tools? If you get into recovery, perform a factory reset.

I can't get to recovery only splash screen.

The only thing i can use is SP flash.

When I flash it all looks ok and SP completes the task but I still can't boot past splash screen.

I managed to get the original firmware and .img and a lk.rom file.
The recommended flash tool is FWDN_Tool but it won't connect to it.

[flydr2]

Have you tried booting into recovery with MTK Droid Tools? If you get into recovery, perform a factory reset.

see attached pictures

[Athos]

Mtk droid tools does not work?
Have you tried formatting then flashing without usrdata and cache?

[flydr2]

Yes... I've tried every combinations I could. The flash finishes OK but the tablet does not boot past the logo with boot error..

Sometimes it wont boot at all... Just black screen

---

Does anyone know how to make files usable in SP flashtool out of these.

lk.rom 1,589KB
and
m801_mtds.img 231,456KB

this is the factory rom.. [Only registered and activated users can see links Click here to register]

[padyt007]

I have the complete rom dump I flashed it using spflash tools it still the same result pls help me out ! My tablet is d101 too

[Rebel]

- MODEL : d101
- MANUFACTURER : alps
- VERSION : 4.2.2 > JELLYBEAN
- PRODUCT NAME : d101
- DISPLAY ID : ALPS.JB3.MP.V1
- BOARD : d101
- MTK PLATFORM : MT6572
- BUILD ID : JDQ39
- BUILD VERSION : vCC01C
- PDA : vCC01C
- UDISK LABEL : vCC01C
- SERIAL NO. : 0123456789ABCDEF

same problem

[maxkiremix]

Hello ,
I have wiselinksz T800 samsung clone MT6572t and I brick it . I don't have any firmware backup...
so if somebody have this device please send me one PM. I realy need firmware rom for unbrick device.
Thanks in advance. [ motherboard ; TD101 mb v1.0 ]