Endless Bootloop - Non Removable Battery!

[MayhemVC]

So I flashed a bad ROM to my phone.
I managed to flash another, not as bad ROM, to it using CWM.

I now have some control over the thing however it is stuck in an endless boot loop.
When I try to flash my stock ROM using SP Flash Tools I get a message telling me that the phone is starting up too quickly.

SP Flash Tools requires the phone to be powered off to flash a ROM and my phone is apparently not giving it enough time to start the process as it is endlessly restarting.

All I want to do is turn my phone off. To my surprise there is no adb command to shut a phone down on;y reboot (dab reboot -p didn't work).

My phone has a non-replacable battery so I can't simply pull it out.

Is there some way of shutting down the phone (not rebooting)?
Holding the power button does nothing and CWM does not have an option for shutdown, only reboot.

Thanks.

P.S. I am currently letting it reboot to run the battery down. So far this is my only hope.

[gogozx]

So I flashed a bad ROM to my phone.
I managed to flash another, not as bad ROM, to it using CWM.

I now have some control over the thing however it is stuck in an endless boot loop.
When I try to flash my stock ROM using SP Flash Tools I get a message telling me that the phone is starting up too quickly.

SP Flash Tools requires the phone to be powered off to flash a ROM and my phone is apparently not giving it enough time to start the process as it is endlessly restarting.

All I want to do is turn my phone off. To my surprise there is no adb command to shut a phone down on;y reboot (dab reboot -p didn't work).

My phone has a non-replacable battery so I can't simply pull it out.

Is there some way of shutting down the phone (not rebooting)?
Holding the power button does nothing and CWM does not have an option for shutdown, only reboot.

Thanks.

P.S. I am currently letting it reboot to run the battery down. So far this is my only hope.

Yeah, you should let it to completely lose the battery, which phone do you have?
From which phone have you tried to port the ROM, and did you use MTK Firmware Adapter Tool?

[MayhemVC]

[gogozx]

Well, you messed everything up, you have to find some device that is similar to yours, like size of the screen, resolution or something, you can't port from totally different phone, plus GooPhone i9 has only one button, and your phone has 3 buttons. This was totally dumb idea, even by trying.

Anyways can you access CWM?
Did you do backup?

[MayhemVC]

Well, you messed everything up, you have to find some device that is similar to yours, like size of the screen, resolution or something, you can't port from totally different phone, plus GooPhone i9 has only one button, and your phone has 3 buttons. This was totally dumb idea, even by trying.

Anyways can you access CWM?
Did you do backup?
Yes I can access CWM, no I didn't backup.
I guess I'll just have to wait until someone to come up with a CWM-flashable ROM.

I'll have a closer look at the requirements for porting next time.

Thanks.

[DirKNirK]

Well, you messed everything up, you have to find some device that is similar to yours, like size of the screen, resolution or something, you can't port from totally different phone, plus GooPhone i9 has only one button, and your phone has 3 buttons. This was totally dumb idea, even by trying.

Anyways can you access CWM?
Did you do backup?no everyone is the smart same Gogo is. the person ask a tutorials in the tool thread. you said no tutorial was needed!

maybe that someone never done it they are kowing not they are need the similare firmware for the tool to good! now the phone bricked because you not tell about that.

[GizBeat]

Yes I can access CWM, no I didn't backup.
I guess I'll just have to wait until someone to come up with a CWM-flashable ROM.

I'll have a closer look at the requirements for porting next time.

Thanks.

If you can access CWM, this is excellent news. Maybe if you have some time someday you can write a tutorial on how you ADB installed firmware.

Have you tried both 'Download' and 'Firmware Update' in SP Flash Tool?

[gogozx]

Well, you messed everything up, you have to find some device that is similar to yours, like size of the screen, resolution or something, you can't port from totally different phone, plus GooPhone i9 has only one button, and your phone has 3 buttons. This was totally dumb idea, even by trying.

Anyways can you access CWM?
Did you do backup?no everyone is the smart same Gogo is. the person ask a tutorials in the tool thread. you said no tutorial was needed!

maybe that someone never done it they are kowing not they are need the similare firmware for the tool to good! now the phone bricked because you not tell about that.
Well, i'm sorry but he should atleast ask, also why did he even try to port it from phone that has 1.1 inch bigger screen

---

Well, you messed everything up, you have to find some device that is similar to yours, like size of the screen, resolution or something, you can't port from totally different phone, plus GooPhone i9 has only one button, and your phone has 3 buttons. This was totally dumb idea, even by trying.

Anyways can you access CWM?
Did you do backup?

no everyone is the smart same Gogo is. the person ask a tutorials in the tool thread. you said no tutorial was needed!

maybe that someone never done it they are kowing not they are need the similare firmware for the tool to good! now the phone bricked because you not tell about that.

Well, i'm sorry but he should atleast ask, also why did he even try to port it from phone that has 1.1 inch bigger screen

And also, why didn't he made backup, that is a must have in case of ROM flashing, everyone does it, i even got 16gb of my backups

[MayhemVC]

If you can access CWM, this is excellent news. Maybe if you have some time someday you can write a tutorial on how you ADB installed firmware.

Have you tried both 'Download' and 'Firmware Update' in SP Flash Tool?

Tried both neither works. I get the same error message from both.

[gogozx]

If you can access CWM, this is excellent news. Maybe if you have some time someday you can write a tutorial on how you ADB installed firmware.

Have you tried both 'Download' and 'Firmware Update' in SP Flash Tool?

Tried both neither works. I get the same error message from both.

Why didn't you do backup in CWM? Best thing is to upload video about what doesn't work and about everything else. Then i could help you.