[HELP] Inew v3-e Problem after repartitioning

[tonio.74]

Good morning,
I need help , I hope someone has an advice for me .
I tried to re-partition the space of my INew v3 -e and now no longer starts (at the start remains stationary on the white screen with the words " INew ").
Here's what I did before the " trouble ."

1. Root
2 . Installed the CWM ( carliv Touch Recovery v.2.1 by driving on [Only registered and activated users can see links Click here to register] - all well).
3 . I started the repartitioning copying the file to the 6 GB, after the backup from CWM , following the instructions of post # 4 of [Only registered and activated users can see links Click here to register] -your- internal- storage - system- 6GB ( with SP Flash tools was wrong ) .
4 . As instructed , I did a reboot ( after restoring the backup) , but by that time I have the phone locked.

I also tried to do the wipe data from CWM , hoping that led me back to factory conditions , but the situation does not change.

I still can not get into CWM , but I do not know what to do.

I tried to flash the ROM 1.0.4 ( [Only registered and activated users can see links Click here to register] ) using SP Flash tools, but nothing happens , SP Flash tools shows no signs of life , does not seem to see the phone .

I do not know what to do.

Thanks for any advice.

[NexusTrix]

You can not be using the partition mods for 104 version this ROM.

Your posting is very unclear.

*Phone locked* - what is that meaning?

You flashed the mod, then flashed the backup, now your phone is bricked. Is that correct?

[tonio.74]

You can not be using the partition mods for 104 version this ROM.

Your posting is very unclear.

*Phone locked* - what is that meaning?

You flashed the mod, then flashed the backup, now your phone is bricked. Is that correct?

Yes,
please forgive me for my bad English.
I have install the CWM, make the backup, install .zip for the 6 GB partition, then restore the backup and reboot.
Now, the on the phone appears (on white background) only the initial logo "INew."
It does not happen more.
Can I still get into CWM.

[NexusTrix]

*Can I still get into CWM.*

Are you ask a question?

If can still boot to CWM recovery, then do factory reset. Don't do full system wipe. Just wipe the /data and /cache.

[Burs]

If you can't get into recovery anymore (by powering up your phone while holding Power+VolumeUp keys I assume?), then your first priority is making SP Flash Tools to see the phone. Do you have the drivers installed? Did SP Flash Tools detected your phone on any of the previous occasions? If yes, then you don't have to worry about drivers, as they are probably installed correctly. If not, check other threads on how to install them. Once you make SP Flash Tools see your phone, everything else is piece of cake. If that's not possible, maybe you could set up an ADB interface and reboot into recovery from there? Just a thought. But for that you will have to have your phone recognized by your PC again. No other alternatives from me. And all what I've said is under assumption that wrong parts of the nand chip weren't flashed over. That's also possible if you don't follow the instructions word by word. Keep us posted on how it goes.

[tonio.74]

If you can't get into recovery anymore (by powering up your phone while holding Power+VolumeUp keys I assume?), then your first priority is making SP Flash Tools to see the phone. Do you have the drivers installed? Did SP Flash Tools detected your phone on any of the previous occasions? If yes, then you don't have to worry about drivers, as they are probably installed correctly. If not, check other threads on how to install them. Once you make SP Flash Tools see your phone, everything else is piece of cake. If that's not possible, maybe you could set up an ADB interface and reboot into recovery from there? Just a thought. But for that you will have to have your phone recognized by your PC again. No other alternatives from me. And all what I've said is under assumption that wrong parts of the nand chip weren't flashed over. That's also possible if you don't follow the instructions word by word. Keep us posted on how it goes.

RESOLVED!
Thank you all anyway.
I realized that I missed the VCOM driver to connect the phone with SP Flash tools.
I flash the rom already partitioned and root, and now everything is ok!
Thank you.

[Burs]

Glad you solved it. Now enjoy it!