[ROM] Koobee Halo 7 mod stock for Pepsi P1S

[tensiang]

Hi again! I finally managed to flash halo 7 rom in my Pepsi p1s. Thanks Cleo for your hard work!
I had to use a pc with windows7 but it all went well. The only issue was with the IMEi, that I could restore with mtk engineering. Unfortunately Chamelephone didn't work for me. For the moment, I have solved the notification problem activating data roaming; since then I have received all the notifications. Nova launcher is working great. Thanks again and congratulations for a very well done job!

[warrick]

Excellent job!!!!!
A lot of thanks to @Cleopatra for his works.

Please do not listen to destructive comments, you've given life to my paperweight.

Finally I don´t have any delay in all apps (watsapp, telegram, exchange client, etc)

Good work!!!

[Hlias]

I love this phone I love you Cleopatra
Great Job, can't thank you enough...

Just FYI guys, I installed Sense Home (HTC's launcher) and it gives u the ability to change the Lock screen Wallpaper.

PS Greetings from Greece.

[techpunked]

I love this phone I love you Cleopatra
Great Job, can't thank you enough...

Just FYI guys, I installed Sense Home (HTC's launcher) and it gives u the ability to change the Lock screen Wallpaper.

PS Greetings from Greece.

Hi mate, where did you install the HTC launcher from? Thanks

[Hlias]

[njezni]

Hiw did you manage to install Sense Home, when I try to open it, it says that it is not compatible?
I use cleopatra's mooded rom

Sent from my H7 using Tapatalk

[Hlias]

Hiw did you manage to install Sense Home, when I try to open it, it says that it is not compatible?
I use cleopatra's mooded rom

Sent from my H7 using Tapatalk
Eeemmm.... I just installed it... My previous phone was a HTC one m8 so it was in my Google account....
Try this below because I think when I was using my HTC phone I applied for beta tester that's why I let me install it.

[Only registered and activated users can see links Click here to register]


I hope this works for you... HTC sense is very slick and smooth. Only freestyle themes lag sometimes, but I don't use them...

[pedrolavos]

Can someone please help me, i think i have my nvram corrupted from my Pepsi P1S because i cant put imeis, always give me errors, can someone ple make a backup of nvram withought imeis or tell me were to fins some nvram.bin compatible. Thaks

[IMendi]

Hello,

First, thanks to Cleo and all these that helped with the ROM. It has been a fantastic work. (It was my first phone flash but ended working all right. My wife apreciate it very much as it was her phone which made her crazy.)

The problems I've encountered, mainly, were with the IMEI. That's the reason for writting this post, beside thanking Cleo and all.
The Chamelephon apk didn't work for me because it didn't open, and the 2 times I got it to open, the second with SU privileges correctly, didn't write the IMEI after restart. Then I tried with other programs throught the pc, but was impossible. (I had to use 2 pc's, 1 win10 to flash the phone and 1 win7 to Copy "2.16_utility.zip" & open_gapps-arm-5.1-micro-20160817.zip.)
As it was impossible for me to write IMEI with Chamelephon, I followed this instructions posted here:

Code:

Setting the IMEIs (credit to @Huber7052 for this part):
- Download "MTK Engineering Mode" from play store
- go to Engineer Mode ( MTK ) -> CDS information -> Radio Information
- select Phone 1
- enter AT+ EGMR=1,7,"IMEI1" (replace IMEI1 by the first IMEI number, the " will be needed)
- click the "SEND AT COMMAND" button
- go back and select Phone 2
- enter AT+ EGMR=1,10,"IMEI2" (replace IMEI2 by the second IMEI number, the " will be needed)
- reboot your phone
- verify the IMEI numbers by dial *#06#

Note that every time you'll do a factory reset, you must set the IMEIs again.

Still it didn't work cos the apk commands need a space between AT and EGMR= etc. Just in case someone is in the same case... here was the trick.

Thanks very much to Cleo anew. You saved us.

[pedrolavos]

Hello,

First, thanks to Cleo and all these that helped with the ROM. It has been a fantastic work. (It was my first phone flash but ended working all right. My wife apreciate it very much as it was her phone which made her crazy.)

The problems I've encountered, mainly, were with the IMEI. That's the reason for writting this post, beside thanking Cleo and all.
The Chamelephon apk didn't work for me because it didn't open, and the 2 times I got it to open, the second with SU privileges correctly, didn't write the IMEI after restart. Then I tried with other programs throught the pc, but was impossible. (I had to use 2 pc's, 1 win10 to flash the phone and 1 win7 to Copy "2.16_utility.zip" & open_gapps-arm-5.1-micro-20160817.zip.)
As it was impossible for me to write IMEI with Chamelephon, I followed this instructions posted here:
[codeSetting the IMEIs (credit to @Huber7052 for this part):
- Download "MTK Engineering Mode" from play store
- go to Engineer Mode ( MTK ) -> CDS information -> Radio Information
- select Phone 1
- enter AT+ EGMR=1,7,"IMEI1" (replace IMEI1 by the first IMEI number, the " will be needed)
- click the "SEND AT COMMAND" button
- go back and select Phone 2
- enter AT+ EGMR=1,10,"IMEI2" (replace IMEI2 by the second IMEI number, the " will be needed)
- reboot your phone
- verify the IMEI numbers by dial *#06#

Note that every time you'll do a factory reset, you must set the IMEIs again.[/code]

Still it didn't work cos the apk commands need a space between AT and EGMR= etc. Just in case someone is in the same case... here was the trick.

Thanks very much to Cleo anew. You saved us.

I try that but give me this error "at command is failed to send" and i put the space...