(2017-10-04, 19:16)kommando Wrote: [Only registered and activated users can see links Click here to register]
And it worked for me.
@kommando :
Please don't take offence at what I'm going to say :
I appreciate your enthusiasm and your contribution in this forum.
BUT try to give good advices to the other members !
In this case you were wrong.
I mean, the suggestion that you given to @Math49 was wrong.
Why ? For
TWO REASONS :
First reason :
Because you can not suggest to use SP Flash Tool with the OTA updates in the Vernee official forum.
Vernee never make firmwares flashable by SP Flash Tool, but exclusively OTA updates.
If you want to use SP Flash Tool, you have to flash the next firmware :
[Only registered and activated users can see links Click here to register]
Second reason :
The dead droid-robot with "no command " is normal onto
Stock Recovery.
When the dead droid-robot appears,
you have to press volume up+power buttons simultaneously.
Then, you will enter onto the screen of the Stock Recovery.
Please take a look at the next screenshot :
I encourage you to offer suggestions to the other members